Styleworks Tokyo User manual

OPERATING INSTRUCTIONS
Please check all components are included prior to assembling.
For assistance call (833) 265 - 5177
Function Instruction - 1
To Adjust Seat Height:
While seated, lean forward and reach under the right side of
the chair to nd the handle. Lift the handle and raise your
body up slightly to allow the chair to rise to the desired
height. Once desired height is reached, release handle to lock
chair at desired height. To lower the seat, lift the handle
while seated. The chair will descend until the handle is
released or the chair reaches the bottom position.
TOKYO
SW-60502
PG 1/2
Function Instruction - 3
To Adjust Seat Depth:
Reach under the left side of the chair to nd the handle.
Lift the handle and adjust the seat depth short enough to
enable your legs to move freely under the chair. To adjust
seat depth, lift the handle and slide the seat into the
preferred position. Located desired position and release
handle to lock.
Function Instruction - 4
To Adjust Arm Height:
Press the buttons under the armpads to move them up or
down freely then release the buttons once the desired
height is reached.
Function Instruction - 2
To Operate Tilt Lockout:
While seated, reach under the left side of the chair to nd
the handle. Pull up the handle and lean back to allow the
chair to tilt backwards. Push the handle to the down position
to lock the chair angle while the desired position is reached.
Once you want to release the mechanism from the lock
position, pull the handle upward (If pull the handle upward,
apply more weight backward onto the back rest cushion and
then release, the back rest cushion will come back to normal
position.)
Note: The force of the backrest can adjust automatically to
the individual weight.

OPERATING INSTRUCTIONS
Please check all components are included prior to assembling.
For assistance call (833) 265 - 5177
PG 2/2
Function Instruction - 5
To Adjust Armrests angle:
While seated, grasp front end of armrests and pivot them
to the left or right. Adjusting arm angle can help support
different types of work and shifts in posture.
Function Instruction - 8
To Adjust Lumber Support Height:
Lumber support height adjust independently
for the short and tall.
Function Instruction - 9
360˚ Swivel:
360˚ seat swivel.
Function Instruction - 6
To Adjust Armrests forward and backward:
While seated, grasp the armrests and push them forward
or backward to a desired position.
Function Instruction - 7
To Adjust Armrests Width:
While seated, hold and push the
armrests outwards or inwards into
a desired width of arms.
TOKYO
SW-60502