Subaru Impreza 2018 User manual

2018 Quick Reference Guide

2
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
Remote keyless entry system
Remote
transmitter key
(if equipped)
Access key
(if equipped)
Lock/Unlock doors
PANIC
*Grip the driver’s door handle to unlock the
driver’s door. Grip the front passenger’s door
handle to unlock all doors and the rear gate
(5-door).
All doors and the rear gate (5-door) will be locked/unlocked by the following procedures while
carrying the access key on your person. (The driver should always carry the access key.)
Keyless access function (if equipped)
Opening trunk (4-door):
Side door (front door handles only):
Rear gate (5-door):
1All doors and the rear gate (5-door)
will be locked.
2The driver’s door will be unlocked.
(To unlock all doors and the rear gate
(5-door), briey press the button a second
time within 5 seconds.)
3Press and hold to open the trunk lid (4-door)/
Press the button to unlock the rear gate (5-door).
4The horn will sound and the hazard warning
ashes will ash.
BASIC OPERATION
For detailed operating and safety information, please refer to
your Owner’s Manual.
23
4
1
1
2
3
4
Lock
Unlock*
Door lock sensor
Grip
Touch
Press Press
Unlock
Lock
Press

3
Ignition switch must be in ACC or ON position.
1Select side to adjust.
2To adjust the mirror, move the switch in the
direction of your desired position.
Adjust each component
1Forward and backward adjustment
2Seat height adjustment (Driver’s seat only)
3Seatback reclining adjustment
Tilt/telescopic steering wheel
Remote control mirror switch
1Adjust the seat position and pull the tilt/
telescopic lock lever down.
2Move the steering wheel to the desired level.
3Pull the lever up to lock the steering wheel
in place.
Make sure that the steering wheel is securely
locked by moving it up and down, and forward and
backward.
Front seat
1Forward and backward adjustment
2Seat height adjustment
3Seatback reclining adjustment
1
3
2
Power seat (Driver’s seat - if equipped)
Manual seat (if equipped)
1
2
3
2
1
2
3
2
1
2

4
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
Start/Stop engine
To start engine:
STEP1: Carry the access key, and sit in the driver’s seat.
STEP2: Apply the parking brake.
STEP3: Shift the select lever into the Pposition
(CVT models).
STEP4: Depress the brake pedal (CVT models) until
the indicator on the push-button ignition switch
turns green.
STEP5:
While depressing the brake pedal (CVT models),
press the push-button ignition switch.
To stop engine:
STEP1: Stop the vehicle completely.
STEP2: Move the select lever to the Pposition (CVT models) or shift lever in neutral
(MT models).
STEP3: Press the push-button ignition switch.
OFF ( Turned off ) ACC (Orange Light) ON (Orange Light)
Change of the power supply (Without starting engine)
The key can be turned from ACC to LOCK only when
the key is pushed in while turning it (all models) and the
select lever is in the Pposition (CVT models).
Push-button ignition switch (if equipped)
Ignition switch (if equipped)
Every time the button is pressed without depressing the brake pedal (CVT models),
the power is switched in the sequence of OFF➞ACC➞ON➞OFF.
Operation
indicator

5
Operate Select lever/Shift lever
Continuously variable transmission (if equipped)
Models with
L position
Models with
manual mode
Shift paddle:
Gearshifts can be performed using the shift paddle
behind the steering wheel.
With the brake pedal depressed,
shift while pressing the Select
lever button in.
Shift while pressing the Select
lever button in.
Shift without pressing the Select
lever button.
L = L position:
Lis for using engine braking when going down a hill, etc. To select this mode, move the
select lever from the Dposition to the Lposition.
M = Manual mode:
With the vehicle either moving or stationary, move the select lever from the Dposition to the
Mposition to select the manual mode.
531
R 42
To change gears, fully depress the clutch pedal,
move the shift lever, and gradually let up on the
clutch pedal.
Manual transmission (if equipped)
Select lever
button
Downshift Upshift

6
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
DRIVER’S AREA
1Headlights
2 Headlightasher,High/Lowbeamchange
3Turn signal
Headlight switch/Turn signal lever/Front fog light switch (if equipped)
A
The high beam assist function automatically
changes the headlight from high beam to low beam
(or vice versa).
The high beam assist function is activated
when:
1. The light control switch is in the AUTO position
and the low beam headlights are on automatically.
2.The turn signal lever is pushed forward.
When the high beam assist function is activated,
the indicator (green) on the combination meter will
illuminate.
High beam assist function (if equipped)
High beam assist indicator
*For models equipped with AUTO position.
HID
F J
G
E
3
3
1
2
B
C
*
A

7
1Windshield wiper
To operate the wiper, rotate knob to;
: Mist (for a single wipe)
: Off
: Intermittent
: Low speed
: High speed
2Wiper intermittent time control
3Windshield washer
4Rear window wiper and washer (5-door)
To operate the wiper, rotate knob to;
: Continuous
: Intermittent
: Off
: Washer
Rotate knob to . The washer uid sprays and the
wiper operates.
Wiper and washer switch
B
To turn on the hazard warning asher, push the button.
Use the hazard warning asher when you have to park
under emergency conditions.
 Hazardwarningasherswitch
C
4Front fog lights (if equipped)
To turn on the front fog lights, rotate dial to .
Front fog lights operate only when headlight switch
is in...
- position.
- AUTO position and the headlights are on.
*For models equipped with AUTO position.
1
2
3
4
4
*

8
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
Turn the dial to adjust the illumination brightness of
the instrument panel.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
When the control dial is turned fully upward, the
illumination brightness becomes the maximum and
the automatic dimming function does not work at all.
Illumination brightness control dial
D
1Defroster button:
Turn the airow mode selection dial.
2, Rear window defogger button:
Press the button to turn on rear window defogger,
outside mirror defogger and windshield wiper deicer
(if equipped). The function will automatically shut off
after approximately 15 minutes.
*The illustration of the print is Type A.
Defroster button/Rear window defogger button
E
Trunk lid release lever (4-door)
F
To open the trunk lid, pull the lever
upward.
Internal trunk lid release handle
To open the trunk lid from inside the trunk,
pull the handle upward.
1
2
Pull

9
Hood lock release knob
G
1For front left window
2For front right window
3For rear left window
4For rear right window
5Lock switch
Power window switches
H
Power door locking switch
I
1To lock all doors and the rear gate
(5-door)
2To unlock all doors and the rear gate
(5-door)
1
3
5
4
2
1 2

10
◆Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.
 Fuelllerlidreleaselever
J
This indicates that the fuel ller door (lid) is
located on the right side of the vehicle.
Located on the edge of each rear door.
When the lever is in the LOCK position, the rear door
cannot be opened from the inside.
Pull the release knob
and slide the anchor
down.
Child safety locks
Front seat shoulder belt anchor height
To lower To raise
Pull the release knob
and slide the anchor
up.
Pull
Right side
Pull
5-door 4-door