Install floater on Tini
1
Installation of floater
1 2
3 4
Fix the floater on handle support Fasten the floater and align
to the screw hole
Fasten the external mounting screw Complete the assembly of floater
If not carrying additional accessories (excluding the accessories attached to the
WhiteShark Tini packages and WhiteSharK Tini floater), the floater can provide the
buoyancy for customers when large-capacity battery of Sublue is selected.
The maximum depth for floater is 40m.
Installation of water-proof phone case support
2
The water-proof phone case support is provided for you to take photos underwater. It
works with water-proof phone case. You can choose to install it or not as needed.
1. Rotate the water-proof phone case support to right or left to a horizontal position.
Insert the two limit bumps ①on the back of water-proof phone case support into the
limit holes ②on the back of floater, insert screws ③and tighten screws with hands or
screwdriver.
3.
2.
Rotate the nuts ④on support
counter-clockwise, open the
clamp to an appropriate degree,
put the phone with water-proof
case into it, tighten the nuts until
it will not drop.
1
32
4
4
