Sublue WhiteShark Tini User manual

SUBLUE Tianjin (Headquarters)
ADD. No.1,Quanzhou Road,Zhongguancun Science and
Tech.Park,Binhai Tianjin CHN
E-mail [email protected]
Web www.sublue.com
The final right of interpretation belongs to Sublue
TM
Please read this User Manual carefully
before using and store it in a safe place
* This product is not intended for use by people under the age of eight.
* As with other electronic products, care should be taken to prevent the risk of electric shock during use.
V10
WhiteSharkTM Tini
USER MANUAL

When using this product for the first time, please read the "WhiteShark Tini User
Manual" for product information and instructions.
You can choose the following ways to get related service and support for frequently
asked questions (FAQ), user manual, and teaching videos, etc.
Recommendations
1
2
Recommendations and Support
Support
Website: http://www.sublue.com
Email: [email protected]
Other regions:
Please contact your dealer for support.
Information of General
Regional Agent
China:
Service Hotline: [phone]
Email: [email protected]
Working time: Monday to Friday,
9:00 to 18:00
(Beijing time)
The United States:
Service Hotline: [phone]
Email: [email protected]
Working time: Monday to Friday,
9:00 to 18:00
(Los Angeles time)

Please read the User Manual and precautions carefully
before using this product!
Notice
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Please fully charge the batteries of the power system and the control handle.
Do not take alcohol or medication before or during using this product.
Try to use this product in an open area. To avoid danger, don't let clothes, algae, ropes, shark
prevention nets, shells, sand or other debris in the water be twisted into the propeller.
Do not replace the battery in water, replace the battery in a dry environment, and ensure that
the device and hands are dry.
To protect the service life of motor, don't run it continuously more than 30S in air. If there is an
abnormal state (such as smell of burning), release the switch immediately to stop the
machine and cut off the power supply at once.
Do not try this product directly on the beach to avoid sand, shells or other debris getting into
the propeller.
The surface of the product should not be in contact with volatile or acidic substances such as
gasoline or rubber water, and sharp objects.
Do not place heavy objects on the product.
Do not throw the battery into fire. When the product is not in use, please prevent it from direct
sunlight. High temperature can damage the battery and can cause an explosion or leakage.
Do not use this product beyond its specified limit depth (20m).
There should be adequate lighting when diving in dark waters or at night.
This product is not intended for use in water area with mixed sand or similar physical
properties.
Don't use it when the machine malfunctions.
The product will sink in the water. If you release it when it is being used in the water, it will sink.
So we recommend fixing an anti-lost rope to it during use.
When not using this product, be sure to take it out of the water.
Non-manufacturer after-sales service person must not repair without authorization. Improper
repair may result in water leakage, damage, fire or electric shock.
If several users are using the products at the same time, for the sake of safety, ensure the
distance between each other is more than 1m.
This product cannot be used as a
life-saving appliance.
Be sure to read the User’s Manual
carefully before using this product, and
be familiar with all operating methods
and precautions.
Please ensure that there is a
companion caring for you within a
certain distance during use of the
product.
This product is not intended for young
persons under the age of eight.
Before using, the product should be fully
inspected to confirm that the battery is in
good condition and the power capacity is
sufficient. And confirm that the propellers
and thrusters are running and functioning
normally.
Before using the product, you should fully
understand the water area you want to
enter. Ensure that you are swimming and
diving in the appropriate water area with
the water area management authority.
Always pay attention to the surrounding
water area during use to ensure that there
is no danger of collision between boats and
swimmers.
To ensure safety, users shall be either
wearing life jackets or equipped with
life-saving equipment under any
circumstances.
Always remove the battery from the
product before transporting or carrying
the product by air, and store the battery
separately in accordance with relevant
regulations.
Donot put your fingers into the propeller.
Donot attach clothing or other objects
near the propeller.
Do not wear loose clothing or devices that
are easily sucked into the propeller by
water.
Wear a swimming hat when using this
product, and pay attention to people with
long hair to avoid twisting hair or clothing
into the propeller.
When using this product, always pay
attention to the battery power and make
sure to return before battery exhaustion.
Donnot let your face or mask against the
rear of the propeller.
8+
Warning
Warning

Overview
Contents
Preparation before the First Use
Instructions for Assembly
Operation Instructions
1
1
1
3
4
6
6
6
8
8
8
8
9
10
10
13
Brief Introduction
Product Features
List of Items
Name of Components
Unpacking for Inspection
Check Battery Power Capacity and Charge
Read the User Manual
Start Use
Assembly the Power System and Handle Bracket
Assembly the Handle and Handle Bracket
Operation Instructions
Description of Indicator Lights
Use the Product Correctly
15
15
15
16
Proper Grip and Hold Posture
Turning in Water
Float Up and Drop Down
Battery
Maintenance
General Troubleshooting Method
Product Parameters
Optional Accessories
16
16
17
18
18
18
19
20
20
21
22
24
27
Cleaning after Use
Storage
Introduction to the Battery of Power System
Battery Charging
Battery Replacement
Introduction to Battery of Control Handle
Charging of Control Handle
Storage and Maintenance of the Power System
Battery and the Control Handle
©2019 Sublue All Rights Reserved
Symbol Description:
*
Appendix 29
Warning
Notice
Annotation (detailed explanation and description)

1 2
WhiteShark Tini is a brand new underwater scooter product launched by Sublue for
worldwide diving, swimming and water enthusiasts. It has two speeds which can be
freely switched, realizing an all-round upgrade of power, performance and experience.
WhiteShark Tini adopts Sublue's self-developed high-efficiency power system and
wireless control technology, with an innovative modular design. Its components can be
flexibly assembled, and it is convenient to carry, meeting the diversified needs such as
single boosting, double boosting, multiple boosting, and power assisting. In addition to
carrying a sports camera, WhiteShark Tini can be equipped with a waterproof device to
mount a mobile phone and easily record underwater moments.
Modular design
The modular design is easy to disassemble, carry and store.
Product Introduction
1
2
Product Overview
Product Features
Wireless connection
Wireless control is provided, with diverse play methods and unlimited possibilities.
Two-level speed change
Multi-machine combination
Long service time
Load extension
Optional accessories
Tini can be equipped with a variety of official accessories, including floater and mobile
phone waterproof holder, double-boosting combination handle, inflatable floating plate*,
which can realize multiple functions in one machine.
There is a standard sports camera mounting point under the front end of the product,
and a mobile phone waterproof holder can be added by the floater to allow you to take
phone underwater shooting.
Quick replacement of battery
The unique battery sealing patent technology enables quick battery replacement within
5 seconds and ensures a reliable underwater sealing.
The single handle can control up to four power systems, realizing unlimited superposition
of power and more DIY possibilities.
The high and low speeds can be switched at any time by handle, and you can enjoy the
underwater experience from free swimming to extreme speed.
Tini adopts advanced DC brush-less motor technology realizing a higher single-machine
single-propeller performance and a longer underwater lasting power through multiple
designs and tests.
The above-mentioned accessories need to be purchased separately. Please contact
Sublue or Sublue's dealer if necessary.

3 4
Components Name
4
1. Thruster cylinder
2. State indicator
3. Rear cover of thruster
4. Water-inflow grille of thruster
5. Switch/ networking toggle button
6. Battery compartment cover
7. Battery compartment
8. Installation slide way
9. Propeller
Tini power system ×1 Control handle ×1 Control handle ×1 Single-boosting
handle bracket ×1
Handle bracket
decorative cover ×1 Quick-release screws ×2 Lithium ion battery & charging base ×1 Charging adapter & cable ×1
Magnetic charging
cable ×1 Mounting screw ×1 Expository documents ×3 Machine sticker ×1
Before using this product, please check carefully whether the product package
includes the above items. If there is any item lost, please contact Sublue or your
dealer.
Please check if the product is damaged.
This product package does not contain accessories other than those mentioned
above. Other accessories can be purchased separately from Sublue.
List of Items
3
Tini Power System
5
6
7
89
2
1
3
4

5 6
Check appearance
After unpacking the product, please check carefully whether the inorganic body shell is
broken, the protective cover is fallen, the propeller blade is damaged, the battery back
cover cannot be opened, the battery swells or has liquid leakage, the battery sealing pad
is damaged, and other conditions affect the use of the product.
Unpacking for Inspection
1
Preparation before the First Use
Check function
*For the operation method, please refer to the relevant content in the following instructions.
1. Switch/gear button
3. State indicator
5. Tightening handle
2. Start button
4. Networking button
6. Charging port of handle
Control Handle
Single thruster Handle Bracket
(1) Check whether the power system can be started and networked normally*, start the
thruster after networking, and check whether the propeller is running normally;
(2) Check whether the control handle can be started and networked normally*, press the
start button after networking, check whether the start button is stuck, whether it can
normally control the starting and shutdown of the power system's propeller, and check
whether the speed levels can be switched normally.
2
1
3
22
3
3
4
5
6
Connect the charger to the AC mains supply (100-240VAC, 50/60Hz).
2 Check battery power and charge it
Charging the Battery of Power System
Charging Charging completed
1
If you find any of the problems when unpacking, don't use it, and please contact
Sublue After-sale Service Center or its authorized service center. Do not run the
product for more than 30 seconds without water.
1.
2.
3.
Universal mounting point of
sports camera
Handle mounting hole
Mounting hole for quick-re-
lease screw

7 8
Before using, please carefully read the user manual and be familiar with the product
operation and instructions.
Explore the underwater world with your WhiteShark Tini.
Read the User Manual
3
4
Start Use
The control handle is embedded with a magnetic charging connector, which can be
charged with the magnetic charging cable of Sublue.
Charging of Control Handle
Socket Adapter Battery and Charging Base
Assembly of Power System and Handle Bracket
1
Instructions for Assembly
1 2
Install the handle bracket onto the installation
slide way of the power system Tighten the quick-release screws of the handle bracket
When charging, please note that the positive
and negative signs of the charging plug
should be in the same direction as those of
the battery to avoid mis-insertion.
To charge the control handle, an adapter with output voltage of 5V and current of
1A and above is required.
Before using the product, please be familiar with the product performance in an
absolutely safe water environment and fullymaster the operations.

910
Assembly of Handle and Handle Bracket
2
3 4
Tighten the quick-release screws of
the handle bracket Complete the assembly of power system and handle bracket
Operation Description
1
Directions for Operation
Switch/speed-level
adjustment button
Switch/ networking toggle button
Networking button
Start button
To start
the power
system1
Press the power system
switch/networking toggle
button for 3S. The power
system light will be on and
the start is successful.
Items Operation Method RemarksPhotos
To start
the control
handle
Press and hold the control
handle switch/speed-level
adjustment button for 3S.
The handle light will be on
and the start is successful.
The start speed is "low
speed" by default.
The initial start speed is
"low speed" by default.
The decorative cover is connected by the buckles and the handle bracket. If you
need to remove the cover, the elasticity of the plastic itself can be used to remove it
with a little force.
The control handle can be installed on the
left or right side according to the needs.
Before each use, check whether the
tightening handle is tight.
Pass the control handle and the grip handle
through the handle bracket mounting holes
and tighten them.

11 12
When the power system is started, please don't do any operation on the control handle;
When the product leaves the factory, the power system and the control handle have been networked, so the
product can be used directly, and there is no need to carry out networking operation. When you have multiple
equipment that need to be used in combination, you can use the networking function according to your needs;
The control handle can control multiple power systems, and for each networking, it cannot determine the
number of power systems that need to be networked, so the operator needs to judge the completion of the
power system networking based on the indicator, and then press the handle's start button to exit the networking
mode of the handle;
The control handle and the power system can be turned on and operated independently, so there is a possibility
that the speed level display is inconsistent after being turned on. At this time, the speed level of the control handle
shall prevail, and except starting the networking mode, the control handle can perform any operation to change
the speed level of the power system to be consistent with that of the control handle.
*
*
*
*
In the shutdown state,
press the power system
switch/networking button
for 6S to enter the
networking mode.
Items Operation Method RemarksPhotos Items Operation Method RemarksPhotos
Power
system
networking2
Pressing for 3S will turn on
the power system, and
continue pressing until 6S
to enter the networking
mode. After successful
networking, it will
automatically exit this
mode.
automatically shut down without
any operation in 40 minutes,
③The battery power capacity is
too low during operation
Control
handle
networking2
In the power-on state, press
and hold the handle
networking button for 3S to
enter the networking mode.
After the power system
and the control handle
are successfully
networked, press the start
button of the control
handle to exit the
networking mode3.
Motor start
After the power system and the
control handle are started and
networked, press the control
handle start button to start
propeller.
Press to start, release to
stop.
To shut
down the
control
handle
①Press and hold the control
handle switch/speed-level
adjustment button for 3S in the
power-on state.
②The control handle will be
automatically shut down without
any operation in 10 minutes,
③The battery power capacity is
too low during operation
All indicators of the
control handle are off
When it has been turned on
and successfully connected
to the network, press the
control handle
switch/speed-level
adjustment button to adjust
speed. The speed will be
adjusted once you press it.
Speed level
adjustment4
There are two speed
levels, and the speed level
is "low speed" after each
restart.
①In the power-on state,
press the power system
switch/networking toggle
button for 3S
②The system will be
Power
system
shutdown
There are two speed
levels, and the speed level
is "low speed" after each
restart.
1
2
3
1
2
3

13 14
When the control handle gives out a low battery power alarm, the handle can
continue to run for about 30 minutes. Please pay attention to return according to
the actual situation.
Please shut down the product before charging the control handle
Description of Indicator of Control Handle
Led Ｂ
Led A
Description of Indicator of Power System
The WhiteShark Tini body and the control handle contain LED indicators for alerting
state and battery power. Their location and definition are as follows:
As the color of battery power indicator may subject to a change, please pay
attention to the change and make a safe return.
Please stop using the product when the indicator is failed, and contact Sublue
after-sales service or designated dealer as soon as possible.
Led A
Led Ｂ
Description of indicator lamp
2
Indicates that the LED indicator flashes
regularly during the indication process
Indicates that the LED indicator is always
on during the indication process
Indicates that the LED indicator is off
Indicates that the LED indicator flashes
regularly during the indication process
Indicates that the LED indicator is always
onduring the indication process
Indicates that the LED indicator is off
The two LED indicators
are always on Powering on
LED lamps are all off Shutdown
LED indicator flashes Networking
LED indicator is always
on Running
LED indicator displays
product battery power Running
ＡＢ
ＡＢ
ＡＢ
ＡＢ
ＡＢ
ＡＢ
ＡＢ
LED A:
High speed
Low speed Red Green
LED B:battery power ≥75%
75%＞battery power ≥50%
50%＞battery power ≥25%
Green
Yellow
Red
Green indicator flashes
LED B indicator flashes
once per S Low battery power capacity LED B: Redbattery power ＜25%
LED indicator flashes Fault prompt Red indicator flashes
The two LED indicators
are always on Powering on
LED lamps are all off Shutdown
LED B indicator flashes Networking
LED lamp is always on Running
LED indicator displays
product battery power Low battery power alert
ＡＢ
ＡＢ
ＡＢ
ＡＢ
ＡＢ
Ａ
Ａ
LED A: High speed
Low speed Red Green
LED A:
battery power＜30% Low speed:
High speed: Green Red
Green indicator flashes
LED A indicator flashes Charging LED A: Red
LED A indicator is always
on Charging completed LED A: Green
Ｂ
Ｂ

15 16
Proper grip and hold posture
1
After assembling WhiteShark Tini, you should be familiar with its performance in an
safe water environment and fully master the operations before using it.
Use the Product Correctly
Turning in water
2
If you have not studied diving or received professional training, don't use the product
to float and dive too quickly to avoid harm to your body.
Float up and drop down
3
Float up
Turn left
Drop down
Turn right
The battery is a high-performance lithium-ion battery designed specifically for the
WhiteShark Tini underwater scooter with a capacity of 6600mAh. The battery features
high-performance cells that provide sufficient power supply for WhiteShark Tini.
Introduction to the Battery of Power System
1
Battery
1. The battery must be charged by the dedicated charger. Sublue will not be
responsible for any consequence of charging by the unofficial charger (including
other Sublue models).
2. WhiteShark Tini is powered by a Li-Ion battery, so be sure to fully charge the
battery before using it for the first time.

17 18
咔嗒
3. When the equipment is powered on, if the indicators indicates a low battery
power, it indicates that the battery power is low. Please charge it in time.
4. It will take about 2 hours to fully charge the battery.
Battery Charging
2
Connect the charger to the AC mains supply (100-240VAC, 50/60Hz).
Battery Replacement
3
When the battery is installed and tightened in the correct way, you will hear a sound of
"clatter". Please confirm that the battery is already installed tightly (as shown below).
Introduction to the Battery of Control Handle
4
The control handle cantains a built-in lithium polymer battery with a capacity of 1150mAh,
which can meet the needs of the control handle service time.
Charging of Control Handle
5
The control handle is embedded with a magnetic charging connector, which can be
charged with Sublue magnetic cable. .
Open the battery
compartment cover Insert the battery into the compartment downward, and press
the battery after the hook is hung
When you charge the battery, please
make sure the positive and negative
signs of the battery should be in the
same direction as those of the charging
block to avoid mis-insertion.
Socket Adapter Battery and Charging Base

19 20
Cleaning after Use
1
Maintenance
After each use, WhiteShark Tini should be completely immersed in clear water for 30
minutes to avoid sea water or foreign objects. And pay attention to the following:
Start the control handle and press the start button to make WhiteShark Tini run in half
air and half water for 10 seconds, and repeat this operation 5-10 times.
*
*
*
*
*
*
*
Install the battery and start the power system before cleaning.
Please use clean water.
Immerse in water for more than 20 minutes .
Don't add chemical cleaning products such as laundry detergents or cleaning
agent in clean water.
When WhiteShark Tini is immersed in water, some bubbles are expelled from the
holes of the equipment body, which is not a malfunction.
To prevent the water from being splashed on your body during operation, please
push the propeller outlet to the bottom of the container.
WhiteShark Tini has a large thrust force in the water. Don't dismantle the handle
bracket. Please apply the low speed and slightly raise the equipment out of water
surface for cleaning, which is easier to control.
1
2
1
2
3
4
5
6
7
8
9
10
Storage and Maintenance of the Power System Battery
and the Control Handle
6
11
12
13
14
When the product is not in use, the battery must be taken out and placed separately.
The battery or control handle shall be stored at 25±5 ° C, the humidity is 65 ± 20% RH, and the
battery power is maintained at 30% - 60%. It shall be separately placed in a cool and
ventilated place.
Don't leave the battery or control handle in direct sunlight or high temperatures (such as
near a microwave oven or an oven), because the battery may overheat and cause an
explosion.
Don't throw the battery or the control handle into fire, that may cause the battery to catch
fire or explode.
Don't charge the battery or the control handle near fire or heat.
Don't drop, squeeze or puncture the battery as this may cause battery leakage, fire or
explosion.
Don't disassemble or modify the battery. Private modifications may cause battery leakage,
fire or explosion.
Keep the battery or control handle out of the reach of children.
Don't charge the battery or control handle below 0 °C.
When the battery or control handle is used below 0 ° C, the battery power capacity will drop
sharply and the running time will be drastically reduced.
For the sake of safety, the battery or control handle should be kept at low battery power
during transportation. Discharge it before transportation and lower the battery power
capacity to 30%.
Don't use a damaged battery or control handle.
If the electrolyte enters your eyes after the battery leaks, don't wipe it. Apply water to rinse it,
and see a doctor immediately. If left untreated, your eyes will be hurt.
If stored for a long time, check the battery power at least every 6 months and charge the
battery power to 60%.
To charge the control handle, an adapter with an output voltage of 5V and an output
current of 1A and above is required.

21 22
Shake fully and clean the WhiteShark Tini body to remove any foreign objects
attached to it.
Wipe the surface with a clean, soft, dust-free cloth. Make sure that the product body
and battery have no water beads. And place them in a cool and dryplace to dry
naturally.
4
If you are not going to use the product for a long time, please note that the power
system, control handle and the battery should be stored separately, and please follow
the principles below:
Please ensure that the power system is in a cool and ventilated place above 0 ° C
and below 45 °C.
Don't place it in areas with poor ventilation or humidity above 65%RH
Don't place it in areas exposed to direct sunlight.
Keep away from heat, fire source and children's reach.
Keep away from those equipment that may generate strong magnetic fields.
Please take out the product at least once a month and run it for about 10 seconds to
avoid the corrosion caused by changes in storage environment.
The control handle contains lithium battery. For storage method, see the Storage and
Maintenance of the Power System Battery and the Control Handle.
Storage
2
Fault Solution
Motor fails to start
General Troubleshooting Method
Check whether the power system battery and control
handle carry electricity.
Check whether the power system and control handle
can be turned on normally, and the indicator is on
normally.
Check whether the power system and control handle
can be networked normally, and the speed can be
adjusted.
Check if the propeller can be rotated.
Contact Sublue or Sublue authorized service
organization.
Screw propeller is stuck
or rotating abnormally
Remove the battery.
Check if the propeller can be rotated.
Check if the propeller is wrapped by foreign object.
Perform the requirements of “Clean after use” section
in “Maintenance” .
Contact Sublue or Sublue authorized service
organization.
* Never use a hair dryer or drying apparatus.
1
2
3
4
3
4
5
6
7
1
2
3
4
5
1
2
3
4
5

23 24
Product Parameters
Specifications and Parameters
Size:
Tini power part: L 355mm × W135mm × H 135mm
Single-boosting handle bracket: L296mm × W 144mm × H 36.5mm
Control handle: L 95mm × W 57mm × H158mm
Grip handle: 35.9mm×H 123mm
Weight:
Working depth: 20m
Speed levels1:High speed 1.4m/s Low speed 1.1m/s
3000g (including battery)
Fault Solution
LED lamp of power
system is abnormal
Check if the battery has power
Check if it can be started normally
Contact Sublue or Sublue authorized service
organization
LED lamp of control
handle is abnormal
Check if the control handle can be started normally
Check if the control handle can be charged normally
Contact Sublue or Sublue authorized service
organization
Fault Solution
Battery charging is
abnormal Contact Sublue or Sublue authorized service organization
The battery back cover
is installed abnormally
or cannot be removed
Check if the battery is installed correctly
Check if the battery swells
Check if the battery compartment cover button can
be pressed and rebounded normally
Contact Sublue or Sublue authorized service
organization
Battery contact is dirty
Check for damage around the battery contacts
Check the host’ s sealing gasket for damage or
bumps
If the stain is slight, clean it with a dry cloth and try to
apply vaseline on the battery contacts.
Contact Sublue or Sublue authorized service
organization
The speed levels cannot
be switched normally
Check whether the power system and control handle
can be networked normally
Contact Sublue or Sublue authorized service
organization
The battery is damaged
and swells Contact Sublue or Sublue authorized service organization
1
2
3
1
2
3
1
2
1
2
3
4
1
2
3
4

25 26
Service time:
support to carry a sports camera, floater, and double-boosting
handle bracket
External loads:
Power system: The usual use time2 can reach the highest 45 minutes
(Continuous use time3: can reach 20 minutes at high speed, and 35
minutes at low speed)
Control handle: The usual use time2 can reach the highest 150 minutes
(Continuous use time4 can reach 100 minutes)
Battery
Capacity:
Rated voltage:
Battery weight:
6600mAh
870g
100w
Energy:
Temperature for charging: 5-40°
Maximum charging power:
98Wh
14.8v
2 hoursCharging time:
Motor Parameters
Rated voltage:
Power:
14.8V
400W
Motor grade:
Maximum speed:
B continuous operation
2470 RPM
Charging Adapter
Input voltage: 100-240V~AC 50/60Hz
Output voltage:
Output current: 4A
Charging indication: Charging: red; Fully charged: green
16.8v
Ambient temperature for operating:
Storage environment temperature:
0-35°
0-45°
Motor stator Gasket Nut
Motor rotor
Fairwater sleeve
Propeller Thruster rear cover

27 28
1. The speed level is the experimental speed. The speed of navigation will be affected by
such factors as different users, water temperature, water depth and flow and other water
conditions, as well as the increase of equipment-carrying load, and the user's underwater
wearing and equipment.
2. The normal use time is the average value of the maximum time that the user operate the
product in general usage habits (non-continuous operation) when the equipment is fully
charged.
3. The continuous use time of the power system is the average value of the maximum time
that the user can achieve for continuous use in each speed level when the product is fully
charged.
4. The continuous use time of the control handle is the average value of the maximum time
that the user can achieve by continuously pressing the start button after the product is
started.
*
*
*
*
Double-boosting Handle Bracket
1
Optional Accessories
Get greater thrust force and cruising speed, and enjoy a
more exciting experience.
Inflatable Floating Plate
2
Super buoyancy, and balanced power, with one
machine for multiple users, providing enjoyment for the
whole family
Diving Cross Strap
3
One-handed operation can be quickly carried out with
the diving cross strap
158Wh battery
4
Please purcahse Large-capacity batteries to achieve
longer service time, and continuous operation for 1h
Colorful Stickers
5
There is a variety of stickers for your choice according to
your needs
The above accessories do not include Tini propeller.
The above accessories do not include Tini propeller.
The above accessories need to be purchased
separately. Please contact SUBLUE or the designated
dealer for details.

29 30
Environmental Protection Service Time:
This mark refers to the time limit (ten years). Within this period, the harmful
substances contained in the electrical and electronic products will not leak or
abrupt changes under normal use. It will not cause serious pollution, bodily
injury, or damage to property.
Tips for exhaust gas recovery:
In order to better protect the earth, when users no longer need the product or the
products service life comes to the end, please comply with the national laws and
regulations on disposal of waste electrical and electronic products and hand it over to
the local manufacturers with approved qualifications for recycling.
Names and Contents of Harmful Substances in Products
Harmful substance
DBP
Circuit
board
assembly
Plastic
(glue)
parts
Metal
parts
Power
cord
Adapter
Battery
Charging
seat
Other ac-
cessories
O
O
O
O
O
O
O
Pb
O
O
O
O
O
O
O
O
Cd
O
O
O
O
O
O
O
O
Hg
O
O
O
O
O
O
O
O
Cr6（VI）
O
O
O
O
O
O
O
O
PBB
O
O
O
O
O
O
O
O
PBDE
O
O
O
O
O
O
O
O
DIBP
O
O
O
O
O
O
O
O
DEHP
O
O
O
O
O
O
O
O
BBP
O
O
O
O
O
O
O
O O
This form is prepared according to SJ/T 11364.
O: Indicates that the content of the harmful substance in all homogeneous materials of
the component is below the limit as specified in GB/T 26572;
X: Indicates that the content of the harmful substance in at least one uniform material
of the component exceeds the limit specified in GB/T26572
Note: This product uses environmentally protection design concepts to effectively
control harmful substances. The harmful substances indicated by “X” cannot be
replaced, mainly due to technological development limitation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

www.sublue.com
Sublue Technical support
http://service.sublue.com
The information, photos and instructions contained in this manual are the property of
Sublue and are not allowed to be copied and distributed without authorization. In
addition, Sublue reserves the right to change any of the information in this manual.
This manual may be subject to change without notice.
You can check the latest version of the user manual in the "Service Support"
section of the SUBLUE official website.
If you have any questions or suggestions about the user manual, please contact
us by the following email address:
[email protected]
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To assure continued operation, follow the attached installation instructions and use
only shield cables when connecting to other devices. Changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.