Sun Chiro Table Contemporary III User manual

1
Contemporary III
Operating Instructions & Manual For Elevation and Stationary Models
MANUAL CONTENTS:
Safe Operaon Page 2
Warranty / Return Policy / Maintenance Page 3
Headpiece Operaon Page 4
Table Body Operaon Page 5
Trouble Shoong Page 6
Table
Maintenance
Vinyl Cleaning
& Disinfecng
Guide
CONTACT INFORMATION:
Website: sunchirotable.com
Phone: [phone]
Email: [email protected]
Our Facility:
Sun Chiro Table
4226 Commercial Dr
Sebring, FL 33870
Facility Hours:
8am to 4pm, Monday—Friday
THESE INSTRUCTIONS ARE CURRENT AS OF JANUARY 2023.
Please contact us if you have any quesons – our online customer support is always available!

2
SAFE OPERATION
CRUSH HAZARD:
Improper use of elevaon equipped tables can result in personal injury. It is your responsibility
as the operator to ensure that tables are disabled when not in acve use treang paents.
Tables should only be operated by instructed personnel that have read the contents of this
manual.
TRIP / SHOCK HAZARD
This table is powered by 120 V AC current. It must be plugged into a grounded 120V
receptacle of at least 15 amps. If an extension cord is to be used it should be of industrial
quality, 14 gauge, and no longer than 25 feet . Any cord running across the oor should be
covered so as to prevent a trip hazard and protect exposed wires from damage.
DISABLE TABLE BY REMOVING KEY
Table should be disabled by removing key when
operator not in the room.
Thank you for your purchase. With proper care your new table should provide many years of dependable
service. If you ever have any issues or quesons please contact us at 863-414-2893. We are always here to
improve your experience with our equipment.
Your table has been shipped to you fully assembled and ready to use. Please note that during shipment the
table may have been jarred and require re-adjusng. If anything does not seem quite right do not hesitate to
contact us immediately at the number above. We will aempt to recfy any issues over the phone in a
mely manner. Please read this manual in its enrety to ensure your safe use and operaon of the table.

3
WARRANTY:
• All Standard Line Tables carry a one-year warranty on materials and workmanship (upholstery is warranted for workmanship
only).
• Presge Line and Contemporary Tables carry a two-year warranty on materials and workmanship (upholstery is warranted for
workmanship only).
• Elevaon columns installed on Contemporary tables are warranted for one year by the manufacturer of the provided columns.
• As a courtesy service we will ship replacement parts to you at no expense, however you will be responsible for the installaon
of the provided parts. The excepon to this service is tables which have been shipped outside the Connental US. In such
situaons the customer will be responsible to cover applicable shipping costs less an equivalent Domesc shipping allowance.
At Sun Chiropracc Tables, LLC sole discreon “hard parts” (dened as those mechanical table parts subject to wear and breakage)
may be provided to the original customer at no charge except for the cost of shipping, at any me both before and aer the
terminaon of the warranty periods stated above.
10 DAY RETURN POLICY:
We oer a 10 day, no-quesons asked return policy for all the standard tables we oer. Please note that this policy does NOT
include tables with custom colors or other customized opons. Tables with a custom color or other custom opons may not be
returned for any reason.
If not sased with your table for any reason you may return it at your expense for a complete refund excluding original shipping
paid. You must contact us within 10 days of arrival to let us know that you will be returning the table. This allows you 10 full days to
decide if you are happy with your purchase.
Returns will not be accepted if you fail to contact us within 10 days of the table's delivery. Tables must be returned in "new"
condion. Tables not returned in "new" condion will have their refund decreased by the stated cost of noted damage.
For the most updated warranty and return policy informaon, please see our website at sunchirotable.com.
TABLE MAINTAINANCE:
Maintenance:
Owners are encouraged to inspect their tables at least once every six months. Tables should be examined for loose nuts, bolts,
frayed wires, etc. A log of such inspecons should be kept. Drops should be lubricated at this me, if not more frequently, with a
spray of WD40 on the drop plungers.
Cleaning Table Naugahyde:
The genuine Naugahyde Vinyl should be cleaned using a soluon of common bleach at 2% to 98% water. This meets all disinfecon
requirements in the United States at the me of this wring. For heavier soil or contaminaon with bodily uids please use a
soluon of 10% household bleach to 90% water and allow the soluon to sit on the stain for a few minutes. COVID, unl the
pandemic is over tables should be disinfected with the 10% bleach to 90% water soluon between paents. To avoid staining
paent’s clothes keep a bole of plain water available to rinse bleach residue from the table aer cleaning.
Face Paper:
Tables are designed to be used with 8.5 inch wide 150 foot long rolls commonly available from most chiropracc suppliers.
Table
Maintenance
Log
Vinyl Cleaning
& Disinfecng
Guide

4
General Operaon
Below please nd the controls and general operaon instrucons. For more in depth assistance with use
please contact us at the number provided on the rst page of this guide.
Toggle Arm, li to unlatch and
switch to toggle. There is an arm
on both sides. Latch to restore
forward cervical drop
Cervical lateral bending release
handle.
Headpiece
Cocking handle
Cervical Tension Adjustment
Rear headpiece Up/Down Ad-
just release
Flexion/Extension Release
Handle

5
Main Body Operaon Elevaon and Staonary*
Tension Knobs
Knee break release
handle
Foot extension
release lock, one
on each side
Lumbar prop and
drop release handle
Thoracic Cocking Handle
Thoracic Prop Release
handle
Lumbar Cocking
Handle
* Staonary Tables use kick
drops to acvate the thoracic
and lumbo/pelvic drops.
All other operaons are the
same as the Elevaon version.
Up/Down Control

6
Problem Soluon
Bolt spins or won’t ghten Thread has been stripped. Call support .
Drop won’t cock. Some surface rust might have formed in shipment. Easy soluon is to rapidly and gently
move the cocking arm up and down unl the drop does cock. We then suggest spraying
a very small amount of WD40 on the plunger to lubricate it.
With me the drop seems s Spray the drop with a small amount of WD40.
Feel a sharp object through a cushion Every eort has been made to ensure that all of the cushion aachment screws were not
over driven into the cushion. Should you think that you feel a sharp object through a
cushion, look under the table at the point where you feel the object. If you see an
aachment screw, use a Phillips head screw driver to back the screw out several turns.
This should solve the problem.
Drop won’t cock aer prolonged use. Spray between the liing arm and the white block some WD 40. Then using a quick tap-
ping method, move the cocking rod up and down unl the drop seats itself and returns
to normal funcon.
Elevaon Does not work Check electrical connecon to table control box, check control box to column plug. Call
support.
Troubleshooting
We are always available to help! Contact us via phone, email or chat on our
website (sunchirotable.com) at any me and we will be happy to assist you!