Sun Oracle Fire X4470 User manual

1
This guide describes the minimum steps you must perform for initial power-on and configuration of the server.
Detailed installation information can be found in the Sun Fire X4470 Server Installation Guide, which is available
at Oracle’s documentation web site: http://www.oracle.com/pls/topic/lookup?ctx=E19694-
01&id=homepage
Refer to the section “Documentation for This Product” at the end of this document for a list of documentation
for your system.
Contents
Oracle’s Sun Fire X4470 Server is shipped with safety documentation and the components that you ordered for
your configuration. Optional components or rack installation equipment might be shipped separately.
Documentation and Media Kit
The Documentation and Media Kit is an orderable option for your system. It contains installation
documentation, the Tools and Drivers DVD, the Oracle Hardware Installation Assistant CD, and the Oracle
SunVTS CD. You can order the Documentation and Media Kit at any time, using the following marketing part
number: X2361A.
You also can download the documentation and software that are included in the Documentation and Media Kit.
■For documentation, go to: http://www.oracle.com/pls/topic/lookup?ctx=E19694-
01&id=homepage
■For software, go to: http://support.oracle.com
Safety and Compliance Information
Before performing an installation, refer to the following documents for safety information regarding the
Sun Fire X4470 Server:
■Important Safety Information for Sun Hardware Systems – Printed document included in the ship kit.
■Sun Fire X4470 Server Safety and Compliance Guide – Online at Oracle’s documentation website.
Sun Fire X4470 Server
Getting Started Guide

2
▼Install Optional Components
Before installing the server into a rack, you must first install any optional components that you ordered with the
server, and that were not factory installed. Refer to the Sun Fire X4470 Server Service Manual for instructions on
installing optional components.
▼Mount the System in a Rack
For rackmounting instructions, refer to the documents included with the rail kit, the service label on the server,
and to the Sun Fire X4470 Server Installation Guide.
▼Connect the Cables
1. Connect an Ethernet cable to the Gigabit Ethernet (NET) connectors as needed for OS support.
2. (Optional) If you plan to interact with the system console directly, connect any external devices, such as a
mouse and keyboard, to the server’s USB connectors, and/or a monitor to the DB-15 video connector.
3. If you plan to connect to the Oracle Integrated Lights Out Manager (ILOM) software over the network,
connect an Ethernet cable to the Ethernet port labeled NET MGT.
4. If you plan to access the Oracle ILOM command-line interface (CLI) using the serial management port,
connect a serial null modem cable to the RJ-45 serial port labeled SER MGT.
FIGURE 1 Sun Fire X4470 Server Back Panel Connections
Figure Legend
1Power supply unit 0 connector 5Service processor (SP) network management (NET MGT)
Ethernet port
2Power supply unit 1 connector 6Serial management (SER MGT)/RJ-45 serial port
3Network (NET) 10/100/1000 ports: NET0–NET3 7DB-15 video connector
4USB 2.0 connectors (2)

3
▼Connect the Power Cords
1. Connect two grounded server power cords to grounded electrical outlets.
2. Connect the two server power cords to the AC connectors on the back panel of the server.
Note – By default, only a two-CPU system will operate from low-line (100 to 127 Volt) AC sources. The system
requires high-line (200 to 240 Volt) AC sources to turn on main power of a four-CPU system.
When power is connected, the server boots into standby power mode. The SP OK/Fault LED flashes while
Oracle ILOM is starting, and the main Power/OK LED remains off until the service processor (SP) is ready for
system log in. After a few minutes, the main Power/OK LED slowly flashes the standby pattern, indicating the
SP is ready for use. Note that the server is not initialized or powered on yet.
Do not apply main power to the rest of the server until you are ready to install an operating system.
FIGURE 2 Sun Fire X4470 Server Front Panel Controls
Connecting to Oracle ILOM
You can use the Oracle Integrated Lights Out Manager (ILOM) to start, boot, and manage the server. There are
two methods for connecting to Oracle ILOM:
■ Connect to Oracle ILOM using a serial terminal connection (SER MGT port; method provided below)
■Connect to Oracle ILOM using an Ethernet connection (NET MGT port)
To connect via an Ethernet connection, you must know the IP address of the server SP. In a typical configuration,
you will accept the IP address assigned by the DHCP server or IPv6 router. If you are not using DHCP or an
IPv6 router, or if you need to assign the server SP a static IP address for any other reason, refer to the Oracle
Integrated Lights Out Manager (ILOM) 3.0 Documentation Collection for instructions.
▼Connect to Oracle ILOM Using a Serial Connection
1. Connect a terminal device to the server. Set the terminal device to communicate using 9600 baud, 8 bit, no
parity, 1 stop bit. A null modem connection is needed.
2. Press Enter on the terminal device to create a connection between the terminal device and the Oracle
ILOM SP.
The Oracle ILOM login prompt appears.
Figure Legend
1Power/OK LED 2Power Button 3SP OK/Fault LED

4
3. Log in to the Oracle ILOM SP (CLI) using the root user account and the root password, changeme.
The command-line interface (CLI) prompt appears (->). You can now start, configure, and manage the server
using Oracle ILOM.
▼Apply Main Power to the Server
Caution – Do not operate the server without all fans, component heatsinks, air baffles, and the cover
installed. Severe damage to server components can occur if the server is operated without adequate
cooling mechanisms.
1. Verify that the power cords have been connected (FIGURE 1) and that the main Power/OK LED is slowly
flashing the standby pattern.
2. Press and release the recessed Power button on the front panel.
When main power is applied to the server, the main Power/OK LED flashes once per second to indicate the
system is booting. The main Power/OK LED is steady green when system is loading an operating system.
Note – When the server powers on, the power-on self-test (POST) can take several minutes to complete.
3. Continue with initial software setup tasks, as described in the Sun Fire X4470 Server Installation Guide.
▼Update Firmware
It is highly recommended that you use the Oracle Hardware Installation Assistant to upgrade system BIOS and
Oracle Integrated Lights Out Manager (ILOM) firmware. For the latest Oracle Hardware Installation Assistant,
as well as firmware, tools and drivers, and related software, go to: http://support.oracle.com
For more information about Oracle Hardware Installation Assistant, go to the documentation site at:
http://www.oracle.com/pls/topic/lookup?ctx=hia&id=homepage
To upgrade system BIOS and Oracle ILOM firmware without using the Oracle Hardware Installation Assistant,
refer to the Oracle ILOM documentation for the version of Oracle ILOM supported for your server at:
http://www.oracle.com/pls/topic/lookup?ctx=E19860-01&id=homepage
All firmware and drivers are on the Tools and Drivers DVD, which is shipped in the Documentation and Media
Kit. You also can download the software on the Tools and Drivers DVD from the Oracle download site:
http://support.oracle.com
▼Set Up the Platform Operating System and Driver Software
You can configure the preinstalled operating system (OS), or install a supported operating system for your
server. It is highly recommended that you use the Oracle Hardware Installation Assistant to update firmware
(regardless of OS) and to install a Linux or Windows OS. Refer to the following table for more OS installation
information.
<hostname> login: root
Password: changeme

5
.
Service and Technical Support
If you need to service your system, you might be asked for your hardware serial number. To find the serial
number of your system, use the Oracle ILOM command show /SYS, or see your Service Manual for
information about where to find the serial number label on your system.
For service and technical support, go to: http://www.oracle.com/us/corporate/contact/global-
070511.html
Documentation for This Product
The following table lists the documentation and the approximate order of the tasks that you might perform
when installing a new system. To obtain the most up-to-date documents, including translations of some
documents, go to:
http://www.oracle.com/pls/topic/lookup?ctx=E19694-01&id=homepage
Operating
system:
Read the Sun Fire X4470 Server
document: For installation information, go to:
For patch information,
go to:
Preinstalled
operating
system
Installation Guide http://www.oracle.com/us/
products/servers-storage/
servers/x86/index.html
•Sun Fire X4470 Server Product
Notes
• http://
support.oracle.com
Oracle
Solaris
Installation Guide for Oracle
Solaris Operating System
Virtual
Machine
Software
Installation Guide for Virtual
Machine Software
• http://www.oracle.com/us/
technologies/
virtualization/index.htm
• http://www.vmware.com
• http://www.oracle.com/
us/technologies/
virtualization/
index.htm
• http://
downloads.vmware.com/
Windows • Sun Installation Assistant 2.3
through 2.4 User’s Guide for
x64 Servers
• Installation Guide for
Windows Operating Systems
• http://www.oracle.com/pls/
topic/
lookup?ctx=hia&id=homepage
• http://www.oracle.com/us/
products/servers-storage/
servers/x86/index.html
http://
update.microsoft.com/
Linux • Sun Installation Assistant 2.3
through 2.4 User’s Guide for
x64 Servers
• Installation Guide for Linux
Operating Systems
• Redhat: https://
www.redhat.com/apps/
download/
• SUSE: http://
download.novell.com/
index.jsp

6
Documentation Comments
Oracle is interested in improving the product documentation and welcomes your comments and suggestions.
You can submit comments by going to this link:
http://www.oraclesurveys.com/se.ashx?s=25113745587BE578
Task Document Type
Review safety information. Safety and Compliance Manual
Important Safety Information for Sun Hardware Systems
Review known issues and workarounds. Product Notes
Install rack hardware. Cable and power on
server. Connect to the SP and determine
network settings. Configure the optional
preinstalled Oracle Solaris OS.
Installation Guide
Install and configure the Oracle Solaris, Linux,
or Windows OS, or install virtual machine
software such as Oracle VM or VMware.
Solaris OS Installation Guide
Linux OS Installation Guide
Virtual Machine Software Installation Guide
Windows OS Installation Guide
Sun Installation Assistant 2.3 through 2.4 User’s Guide for x64 Servers
Manage server accounts, monitor alerts, set
remote access and redirection, and view
component status and event logs.
Oracle ILOM 3.0 Documentation:
http://www.oracle.com/pls/topic/lookup?ctx=E19860-
01&id=homepage
Customize BIOS settings and RAID settings.
Remove and replace hardware components.
Troubleshoot and isolate server problems.
Review system specifications and hardware
reference material.
Service Manual
Diagnose system issues. Diagnostics Guide
Copyright © 2011, Oracle and/or its affiliates. All rights reserved.
Copyright © 2011, Oracle et/ou ses affiliés. Tous droits réservés.
Part No. E21740-02
May 2011