Sunnydaze Decor EG-072 User manual

M480750 05/2023
5-IN-1 MULTI-GAME TABLE

Page 1 / 7
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
HELPFUL HINT
Sunnydaze Decor advises reading this
manual fully, and assembling the game
table soon after purchase. Check that all
parts are accounted for and familiarize
yourself with all assembly steps before
beginning.
Save this manual for future reference.
(not included)
Phillips Screwdriver
Rubber Mallet
2-PERSON
ASSEMBLY
P
O
IMPORTANT: Two adults are needed
to turn the table over, as shown.
Do not lift the table
by the legs; lift by the
cabinet only.
Do not let table lean
on its legs.
(included)
Hex Key
Spanner

M480750 05/2023 Page 2 / 7

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
  
C7 M4x19mm Player Screw 26
H1 M6.35x25mm Bolt 12
H2 M6.35 Washer 24
H3 M4x44mm Screw 12
H4 M3.5x12mm Screw 20
H5 M6.35x32mm Bolt 4
H6 M6.35 Nut 4
H7 M3.5x12mm Screw 8
H8 M3.5x15mm Screw 3
H9 6.35x38mm Threaded Knob 4
H10 6.35x25mm Threaded Knob 2
H11 M6.35x22mm Bolt 2
H12 Net Peg 2
  
A1 Billiard Ball Set 1
A2 Ball Rack 1
A3 Cue 2
A4 Paddle 2
A5 Table Tennis Ball 2
A6 Table Tennis Net Set 1
A7 Hockey Striker 2
A8 Hockey Puck 2
A9 Basketball 2
A10 Inater 1
H13 Soccer Ball 2
  
C1 5-Player Rod 2
C2 1 or 3-Player Rod 4
C3 2-Player Rod 2
C4 EVA Bushing 16
C5 Stop Ring 4
C6 Plastic Rod Washer 16
C8 Home Player 11
C9 Away Player 11
P7 Rod Handle 8
P11 Rod Cap 8
  
P1 Side Panel (L/R) 2
P2 End Panel 2
P3 Playing Field 1
P4A Front Left Leg 1
P4B Front Right Leg 1
P4C Back Left Leg 1
P4D Back Right Leg 1
P5 Leg Leveler 4
P6 Playing Field Support 2
P8 Hockey/Table Tennis Board 1
P9 Ball Catch (Top and Bottom) 2
P10 Billiard Table 1
P14 Corner Pocket 4
P15 Side Pocket 2
P16 Basketball Backboard 1
P17 Rim Bracket 1
P18 Rim/Net Set 1
P19 Backboard Rod 2
P20 Net 1
P21 Leg Panel 2
P22 Hockey Goal 2
C10 Accessory Holder 1
2-PERSON
ASSEMBLY
 — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING

M480750 05/2023 Page 3 / 7

Review all steps carefully and understand assembly before beginning.
Pay close attention to drawings and placement of parts.
STEP 1 STEP 2
P4A: 1
P4B: 1
P5: 2
H1: 6
H2: 8
H10: 2
P10: 1
P14: 4
P15: 2
H4: 12
STEP 3
P4C: 1
P4D: 1
P5: 2
H1: 4
H2: 6
H11: 2
STEP 4
P21: 2
H7: 8
Ensure each leg is
installed on the correct side
of the table; the legs used in this
step have fewer pre-drilled holes and
install on the side of the table that has pre-
drilled holes for accessory bag installation.
Ensure each leg is installed on the
correct side of the table; the legs
used in this step have extra holes for
installing the backboard rods.

M480750 05/2023 Page 4 / 7
STEP 5 STEP 6
P8: 1 (reversible playing surface)
P22: 2
A6: 1
C10: 1
H1: 2
H2: 2
STEP 7 STEP 8
P9: 2 sets
H4: 8
P1: 2
P3: 1
P6: 2
H3: 4
Hockey Surface
P2: 2
H3: 8
Table Tennis Surface
(only install net when
playing this game)

M480750 05/2023 Page 5 / 7
STEP 9

C1: 1
C2: 2
C3: 1
C4: 8
C5: 2
C6: 8
C7: 13
C8: 11
P7: 4
P11: 4

C1: 1
C2: 2
C3: 1
C4: 8
C5: 2
C6: 8
C7: 13
C9: 11
P7: 4
P11: 4
Follow the diagram below to ensure rod and player placement is correct.
• Place one Plastic Rod Washer (C6) and one Rubber Bushing (C4) onto the handle-side of each
rod. Run the handle-side of the rod through the inside opening on the table. Firmly push Handle
(P7) onto the rod.
• Ensure players are installed facing the center of the playing field.
• Goalie Installation: Stop Ring (C5), Player, Stop Ring (C5), Plastic Rod Washer (C6), EVA
Bushing (C4). Run the rod through the opening on the opposite side of the table. Place End Cap
(P11) on the rod.
• Midfield Player Installation: Players, Plastic Rod Washer (C6), EVA Bushing (C4). Run the rod
through the opening on the opposite side of the table. Place End Cap (P11) on the rod.
• Secure all players and stop rings using Player Screw (C7).
Identify the handle-side of the player rod by locating
the pre-drilled hole that is close to one end