Sunnydaze Decor MERANTI FRN-504 User manual

MERANTI WOOD PLANT STAND
FRN-504

Page 1 / 3
HELPFUL HINTS
• Sunnydaze Decor advises reading this manual thoroughly
and assembling the item soon after purchase.
• Do not fully tighten hardware until all components are
assembled. If hardware is tightened too soon, mounting
holes may not align, and parts may not easily fit together.
  
AShelf Panel 2
BBottom Shelf Support 2
CTop Shelf Support 2
DSide Panel 2
EFront Leg 2
FJCBC M6x45 Bolt 8
GJCBC M6x50 Bolt 8
HBarrel Nut 8
IBarrel Nut Driver 1
JHex Key 1
WARNING
CHOKING HAZARD — This item contains small parts that
can be swallowed. Keep children away during assembly.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
07/202089707


Read carefully and understand assembly before beginning.
Do not fully tighten bolts all until all components have been loosely assembled.
Page 2 / 3
STEP 1
A: 1
D: 2
F: 4
Do not fully tighten any bolts until after Step 3 is complete.
STEP 2
B: 2
C: 2
E: 2
G: 8
H: 8
• Ensure the notches for the lower shelf on Side Panel (D) are facing the same direction.
• Align Shelf Panel (A) with the tops of Side Panels (D) and loosely secure by hand-tightening four M6x45 Bolts (F).
• Insert two Barrel Nuts (I) into Bottom Shelf Support (B) and Top Shelf Support (C). Use the Barrel Nut Driver to align
the opening of the barrel nut with the pre-drilled hole below the peg on the shelf supports.
• Ensuring Top Shelf Support (C) is on top, align the pegs and holes of Top Shelf Support (C) and Bottom Shelf
Support (B) with the side panel and Front Leg (E), then loosely secure by hand-tightening four M6x50 Bolts (G),
ensuring the bolts thread into the barrel nuts.
• Repeat the previous step on the opposite side of the unit.
07/202089707
Do not fully tighten any bolts until after Step 3 is complete.

Page 3 / 3
Care & Maintenance
For residential use only. Only use on a at, level surface. Do not climb or sit on the shelves.
Periodically check assembly points and tighten ttings as necessary.
Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover unit with a breathable cover to help protect it from the harmful e󰀨ects of
sunlight, inclement weather, dust build-up, and collecting debris.
: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
:If left untreated, the wood may weather. A suitable wood stain or oil may need to be
applied yearly.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
WARNING!
             
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

STEP 3
A: 1
F: 4
07/2020
Tighten all bolts after this step is complete.
• Place Shelf Panel (A) onto the lower level of the stand and secure it using four M6x45 Bolt (F).

89707