Sunnydaze Decor QX-FLRH User manual

FLRH 04/2023
FIRESIDE LOG RACK
WITH TOOL HOLDERS
QX-FLRH
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Page 1 / 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
ASide Panel 2
BBracket 2
CShelf 1
DM6x35mm Bolt 12
EWasher 12
FLock Nut 12
GSpanner 1
HPhillips Hex Key 1
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

FLRH 04/2023 Page 2 / 2
ASSEMBLY
Review all information and understand assembly before beginning.
Nylon
Insert
• Place log rack on a hard, dry surface.
• Do not overload the log rack — holds approximately 1/8 face-cord of firewood.
• Ensure fittings are tight before use. Periodically check and tighten hardware as necessary.
• Protect the unit from outdoor elements with a cover. Cover not included.
• Do not allow children to play with or around the log rack.
SAFETY STATEMENTS & WARNINGS

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


1. Align Shelf (C) with the bottom of one
Side Panel (A) and loosely secure by
hand-tightening two M6x35mm Bolts
(D), two Washers (E) and two Lock
Nuts (F). Repeat to loosely secure
the remaining side panel.
2. Align Brackets (B) with the side panels
and loosely secure each bracket by
hand-tightening four M6x35mm Bolts
(D), four Washers (E) and four Lock
Nuts (F), as shown.
3. Fully tighten all hardware using
included Spanner (G) and Phillips
Hex Key (H).
TIP: To tighten the hardware more quickly,
turn the screwdriver on the bolt head clockwise
while simultaneously turning the spanner on the
lock nut counterclockwise.
IMPORTANT: Lock nuts must be installed with the nylon insert on the outside.
Tools are required to fully tighten lock nuts, failure to properly tighten the lock nuts may
result in product malfunction or personal injury.