Sunpai DB316 User manual

使用说明书
Product Manual
Base Station
ESL

Contents
1) Summary..................................................................................................................1
1.1 Product Introduction...........................................................................................1
1.2 Dimensions and Weight......................................................................................1
1.3 Unpacking and checking....................................................................................1
1.4 Features and Usage.............................................................................................1
1.5 Environmental Requirements.............................................................................2
1.6 Electronic Shelf Label System Overview ..........................................................2
2) Technical Characteristics .........................................................................................3
2.1 Key Perfomance Areas.......................................................................................3
2.3 Base Station Antenna Pattern .............................................................................4
3) Base Station Installation ..........................................................................................5
3.1 Panel Description ...............................................................................................5
3.2 Power Supply and Networking ..........................................................................6
3.3 Installation Conditions .......................................................................................7
3.4 Installation Location ..........................................................................................7
3.5 Installation Method ............................................................................................7
3.6 Precautions .......................................................................................................8
4) Troubleshooting ......................................................................................................9
5) Warranty ..................................................................................................................9

1
1. Contents
1.1 Product Introduction
DB316 is the third-generation wireless base station. It is a new Active RFID
system and the new ESL Tags. Sunpai Tag Shanghai produces the base station for its
electronic shelf label system (ESLs) and other products.
1.2 Dimensions and Weight
Dimensions:140mm x 38mm Weight: 250g (approx)
1.3 Unpacking and Checking
In order to facilitate future storage and transportation, please keep the carton
and packing materials after opening them. In addition to the DB316 wireless base
station, there is also included the following products and accessories:
Item Name Qty Comment
1 DB316 Wireless Base Station 1
2 Power Adapter 1
3 Phillips pan head self-tapping screws 4
4 1
5 Warranty card 1
Fitting
1.4 Features and Usage
Main Features: Wireless communication with ESL with easy installation,operation
of the labels, large signal coverage radius and supports many labels.
Interface: TCP / IP connection with ESL server, 2.45GHz ISM with ESL labels.
LED: Blue - Power, Red - System, Yellow - Data Tx, Green - Data Rx.
The DB316 maximum communication distance is 30-50 meters (Line of Sight and
open environment).
Compared with base stations of similar nature the DB316 wireless base station has
an attractive appearance, ease of installation, and has good structural design, with an
IP53 protective environment rating.

2
1.5 Environmental Requirements
Temperature Range: -10°C to +55°C(14°F to +131°F)Humidity range: 20% to
95%Supply Voltage: AC/DC Adapter. Base Station Input Voltage 6VDC, 2.5A
1.6 Electronic Shelf Label System Overview
An electronic shelf label system (ESLs) consists of electronic shelf labels,
ESL server, switches, base stations, Handset and software. The product information
in the database will be copied from the host computer to the electronic shelf label
system application software; then updated prices or other information will be sent
via Ethernet (or serial port) to the Base Stations which will then deploy the update
throughout the entire store via 2.4GHz wireless transmission Each part is described
below:
ESL server: Running ESL System;Switch: For data exchange between the base
station and the server;Base Station: For data exchange between the ESL and the
Hub;Electronic Shelf Label: Updatable display for stored serverinformation;Handheld
Reader: Used to bind labels to merchandise and for administration.
Electronic shelf label system (ESLs) Connection Diagram
Handheld Terminal
Base Station
ESL Labels
POS/MRP
<Data Docking> <Data Docking>
<Ethernet Cable>
2.4 GHz Wireless
Two way
communications
ESL Server Hub

3
2. Technical Characteristics
2.1 Key Performance Areas
Uses 2.4GHz frequency within ISM band, worldwide compatibility Sunpai Tag
proprietary wireles protocol to ensure data securitySupports Power over Ethernet
ability to cascade Base Stations to reduce installation complexity and cost.
(1) Electrical Characteristics
Parameter
Power Supply
DC6V, 2.5A
Supports 802.3af POE Power Supply
Standby Current 650mA
Operating Current 800mA
Network Interface 10/100M Ethernet UDP Protocol
Expansion Interface 10/100M Ethernet expansion port for a singleBase
Station extension
IP Rating IP53
(2) RF Characteristics
Parameter Specification
Modulation
GFSK
Frequency 2.4 to 2.4835GHz
Transmit Power 15dBm
Reciever Sensitivity [email protected]%BER
Antenna VSWR ≤1.5:1
Communication Distance 15m to 50m
SunpaiTag

4
2.3 Base Station Antenna Radiation Pattern
Horizontal Pattern Vertical Pattern
3D plot of Base Station Atenna Radiation Pattern

5
3. Base Station Installation
3.1 Panel Description
RX
TX SYS
PWR
DC6V
LAN
EXT
Label Name Use
RX Recieve Data LED Lights when data from an ESL is recieved
TX Send Data LED Lights when Base Station sends data to ESL
SYS System Status LED Indicates normal System Status
PWR Power LED Lights when Base Station Powered
DC6V Power Port 6VDC Power Connection
(DC plug socket)
LAN Network Port Network cable into Base Station
EXT Expansion Por Port to connect one additional Base Station

6
3.2 Power Supply and Networking
Method Power
Supply Description Connections
Border
1
Power
Supply
When the switch doesnot
provide powerand external
power isrequired
Provide 6V to DC6V
socket Connect Ethernet to LAN
port
Border
2POE Switch provides power via Ethernet port
Connect PoE Ethernet to LAN
Port
Border
3Cascade
DB316 Base Station
provides power to next
Base Station using PoE(do
not cascade more than one
extra )
Connect PoE Switch to LAN Port
and connect Base Station to EXT
Port on Second Base Station
Server Switch
POE
POE
DB316 Base Station Extended Base Station
≤15m
1
2
3
Power Supply

7
Figure 3-1 Base Station
Figure 3-2 Fitting
As figure 3-2
show，when you
want to put the
Cable out,you can
use the fitting.
Arrangement
3.3 Installation Conditions
Before Installation Check that the product is intact and all attachements
arecomplete, if there is damage or missing parts please contact Sunpai Tag
promptly.
Check whether the following installation conditions exist before continuing:
A) Installation will meet applicable workplace standards.
B) Complete the required Installation processes.
3.4 Installation Location
The choice of Base Station position depends on its installation, it should be where
possible, in a place free of obstacles that is safe and easy to operate.
The DB316 Base Station can be mounted on the ceiling and or walls depending on
3.5 Installation Method
Before Installation: Configure all Base Station IP Addresses (refer software
manual for instructions for this step).
Installation: the Base Station secures with Phillips pan head self-tapping screws
connect power cable and Network cable. Typical installation Figures 3-1 and 3-3

8
Figure 3-1 Base Station Arrangement
The Frame is the building outline, the view is from the top down with the
viewof all the Black dots (which are Base Stations) on the ceiling of the building;
The Round dotted line circles are the Base Station signal coverage areas, typical
coverage depending on the environment is between 15m to 50m in a simple open
environment for a single Base Station.
Figure 3-3 shows the inter Base Station installation distance, the dotted line
represents the Base Station wireless signal coverage area;
Ensure the distance betwen base stations is less than or equal to 20m.
3.6 Precautions
1) The DB316 power supply shipped has an input range of 100V to 240Vac
360mA please ensure it is able to be supplied with the correct voltage.
(2) Ensure that equipment is grounded.
(3) Check the Base Station and antenna installation position and orientation with
respect to the ESL that will be exchanging data.
(4) This product radiates Radio Frequency (RF) energy, the installation
andcommissioning personnel should leave at least 30cm between themselves and
theantenna in order to meet the FCC requirements for human exposure.
(5) Any radio transmitting equipment, inlcuding this Base Station, can
beinterfered with by medical devices without proper protection. If there are
problemsseek the medical device manufacturer for advice.
(6) This equipment may cause interference with other electronic devices.
≤20 m
Figure 3-3 Base Station Installation Distance

9
4. Troubleshooting
Symptom Cause Troubleshooting Comment
Power LED
Does not light
Power Adapter
may not work
Check Mains socket
has power and is on,
replace adapter if it does
Network
Communication
not normal
Interface Cable not
connectedor
has problem
Reconnect cable or
replaceif this still
no response
Base StationIP
configuration
Problem may
exist
Use the ESL Startup
softwareto configure
Base Station IP Address
5. Warranty
Thank you for purchasing Sunpai Tag product. The products you have purchased
have a limited warranty service during the given warranty period in which we will
provide the warranty services. The product warranty card is sent along with the
product, please t keep it safe, if the product needs warranty service, please returnit
together with the warranty card to Sunpai Tag.

10
Disclaimer:
This manual belongs to Shanghai Sunpai Trading Limited, It cannot be reprodu-
ced in paert or whole without the express permission of Sunpai Tag, parties that do
reproduce in part, or whole ,this document risk legal action.
Copyright:
document, and has no obligations to notify any person of these modifications of
Sunpai

TEL
Shanghai Sunpai Trading Limited .
Address：Room1512,No.145,Lane1399,Husong Load,Songjiang
BASE STATION
TM
District ,Shanghai,China.201615
:[phone]
Fax :[phone]
Web:www.sunpai.com.cn