SUNRICH TECHNOLOGY M-410 User manual

4x1 HDMI Switch
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.

MN8000100002 Page2
Features and Specification
Four HDMI inputs, one HDMI output
HDMI 1.3b compatible
On-board equalizer which allows data transmission on long
cables
Supports signal rate up to 2.25Gbps
Supports 12-bit Deep Color 1080p
HDCP compliant
Easy installation
Handy front panel button to switch between inputs
LED indicators
Metal case
Package Contents
One 4x1 HDMI Switch
One Power Adapter
One User Manual
Mounting ears (optional)
Note: Contents may vary depending on country/market.

MN8000100002 Page3
Hardware Layout
Figure 1. Front Panel Layout
Input Select Button: Press this button repeatedly to cycle
through to the desired input device
Power LED: This LED indicator will become active when the
HDMI splitter is powered on
Input Device LED (1-4): This LED indicator will become active
when a link with HDMI source device is established on the
corresponding input port
Select Device LED (1-4): This indicates which input port is
currently selected as output

MN8000100002 Page4
Figure 2. Rear Panel Layout
Power On/Off Switch: Power on/off the HDMI splitter
Power Jack: Connect to the included power adapter
HDMI Output Port: Connect to a valid HDMI capable device to
this HDMI output port. The currently selected HDMI input
source device will be output through this HDMI output port.
HDMI Input Port (1-4): Connect up to 4 HDMI source device
to these HDMI input ports

MN8000100002 Page5
Hardware Installation
1. Connect a HDMI cable between the output port of the HDMI
switch and any input port of the HDTV or display.
2. Connect any HDMI media devices to the input ports of the HDMI
switch.
3. Plug the power adapter into the power jack of the HDMI switch.
4. Plug the power adapter into a reliable power outlet.
5. Turn on the power switch, and ensure that the power LED
indicator is active.