SUNRICH TECHNOLOGY U-2480 User manual

USB 10Gbps 7-Port Hub
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
respective owners.

MN3000000185 Page 2
Contents:
Chapter 1: Introduction..........................................................3
1.1 Product Introduction ....................................................3
1.2 Features........................................................................3
1.3 System Requirements ..................................................4
1.4 Package Contents.........................................................4
Chapter 2: Getting Started .....................................................5
2.1 Hardware Installation ..................................................5

MN3000000185 Page 3
Chapter 1: Introduction
1.1 Product Introduction
The USB 10Gbps 7-Port Hub features 7 USB 10Gbps ports for use
with a MacBook or Pixel, extending functionality for connecting other
devices.
1.2 Features
Expand the connectivity of your USB port enabled computer
using the latest USB 3.2 Gen2 technology
Add 3 USB Type-C and 4 USB Type-A ports to your MacBook,
Chromebook, or computer that features a USB port
Supports USB Battery Charging Specification v1.2 o
n USB
Type-A ports
Supports 3A on downstream USB Type-C ports
Compliant to USB 3.2 Specification Revision 1.0 and USB
Specification Revision 2.0
Backward compatible with USB 2.0 and 1.1 devices
Hot-swapping feature allows you to connect/disconnect devices

MN3000000185 Page 4
without powering down the system
No devices drivers required for Hub installation
LED to indicate Hub power
1.3 System Requirements
Windows® 7/8.x/10/11 (32/64 bit)
macOS 10.13 or later
Linux 3.x or later
One available USB port
1.4 Package Contents
1 x USB 10Gbps 7-Port Hub
1 x User Manual
1 x Power Adapter
Note: Contents may vary depending on country/market.

MN3000000185 Page 5
Chapter 2: Getting Started
2.1 Hardware Installation
1. Plug the power adapter into the power jack of the USB 10Gbps
7-Port Hub.
2. Plug the USB 10Gbps 7-Port Hub into an available USB port on
your computer.
3. Upon powering up your computer, the USB 10Gbps 7-Port Hub
will be recognized by the computer’s operating system.
4. Once complete, you are ready to plug all peripheral devices into
your new USB 10Gbps 7-Port Hub.