
Installation:
-Fixture is equip with Bracket
-Connection outlet : NPT 3/4”
-Conduit and pole is not included in products.
-All installation must conduct by qualify electrician.
Mounting option Available:
(Note: U-Bracket Mounting option is not available for CES-J40S)
Installation:
-Fixture is equip with Bracket
-Connection outlet : NPT 3/4”
-Conduit and pole is not included in products.
-All installation must conduct by qualify electrician.
Mounting option Available:
(Note: U-Bracket Mounting option is not available for CES-J40S)
Installation:
-Fixture is equip with Bracket
-Connection outlet : NPT 3/4”
-Conduit and pole is not included in products.
-All installation must conduct by qualify electrician.
Mounting option Available:
(Note: U-Bracket Mounting option is not available for CES-J40S)
Installation:
-Fixture is equip with Bracket
-Connection outlet : NPT 3/4”
-Conduit and pole is not included in products.
-All installation must conduct by qualify electrician.
Mounting option Available:
(Note: U-Bracket Mounting option is not available for CES-J40S)
Installation:
-Fixture is equip with Bracket
-Connection outlet : NPT 3/4”
-Conduit and pole is not included in products.
-All installation must conduct by qualify electrician.
Mounting option Available:
(Note: U-Bracket Mounting option is not available for CES-J40S)
100W Explosion Proof Light
WIFI-CON
User Manual
Part Number:
Important: Read all instructions prior to installation. EPL-NW100
Summary
Specications
Installation
Mounting Examples
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 08/08/2016
Explosion-proof lighting is critical in environments where volatile
ammable liquids or ammable gases and vapors are present. This
LED explosion-proof light is safe to use in Class 1, Div 2 locations,
such as oil reneries, paint booths, fuel and chemical storage areas,
and grain processing plants. The waterproof ood light has a vibration-
resistant die cast aluminum housing and tempered glass lens to
protect internal components and is designed to last.
The EPL-NW100 oers several mounting options including ceiling,
pole, pendant, and wall mounting. Ceiling and wall applications are
mounted using the adjustable swivel mount bracket included with unit.
Pendant and pole mounting applications are mounted from the ceiling
or railing and are suspended by a rigid pipe via the 3/4” NPT hub on
the back of the xture. Wiring is fed through rigid pipe to the junction
box and tied in to the xture’s power wires. See examples of mounting
to the right.
U-Bracket Ceiling Mount Pendant Mount
Pole Mount
Wall Mount
U-Bracket Wall Mount
• This product should be installed by a fully certied electrician in
accordance with local building and electrical codes. Electrician
should be familiar with operation of the product and the hazards
involved.
• Due to risk of electric shock, ensure that the main power source and
circuit breakers are switched o before performing any installation
or wiring procedures. All electrical connections must be in 3/4” NPT
conduit or pipe.
• Failure to properly support the xture during installation may cause
damage or injury, for which the manufacturer is not responsible.
Ensure the mounting method chosen will support the weight of the
xture.
Warnings
Mounting
STANDARD
EPL-NW100
Replacement For 250 Watt HID
Total Power Consumption 100 Watts
Operating Voltage Range 120~277 VAC
Beam Angle 120 degree
Operating Temperature -22~122°F (-30~50 °C)
IP Rating IP68
LED Lifetime 50,000 Hours
Fixture Weight 16.5lbs (7.5Kg)
Warranty 5 Year