Supermicro X9DRD-7LN4F User manual

SUPERMICR R
CONTACT INFORMATION
MNL-1318-QRG REV. 1.0A
• www.supermicro.com (Email: [email protected])
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: ftp://ftp.supermicro.com
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2012 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
PACKAGE CONTENTS (FOR SINGLE-PACK ONLY)
X9DRD-7LN4F/X9DRD-7LN4F-JBOD/X9DRD-EF
QUICK REFERENCE GUIDE REV. 1.0A
• One (1) Supermicro Motherboard
• Two (2) SATA Cables (X9DRD-7LN4F(-JBOD))/Six (6) SATA Cables (X9DRD-EF)
• Two (2) I-Pass to 4 SATA (50-cm) Cables (X9DRD-7LN4F(-JBOD))
• One (1) I/O Shield
Jumper Item# Description Default Setting
JBT1 19 Clear CMOS See Chpt. 2 in User Manual
JI2C1/JI2C2 15 SMB to PCI-E Slots Off (Disabled)
JPB1 10 BMC Enabled Pins 1-2 (Enabled)
JPG1 11 VGA Enabled Pins 1-2 (Enabled)
JPL1 16 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JPS1 (X9DRD-7LN4F
(-JBOD) Only) 46 SAS Enabled Pins 1-2 (Enabled)
JWD1 20 Watch Dog Timer Enable Pins 1-2 (Reset)
JI2C1
VGA1
I-SATA1
I-SATA0
I-SATA5
I-SATA4
I-SATA3
I-SATA2
JIPMB1
JPL1
JPG1
JPB1
FAN5
FAN6
FAN8 FAN7
FAN1FAN2FAN3FAN4
JF2
T-SGPIO1
T-SGPIO2
JSD1
JBT1
JTPM1 JF1
JPI2C1
JOH1
JI2C2
JL1
JSTBY1
JD1
LED3
LEDM1
LED2
LAN2/4 LAN1/3
CPU1
CPU2
CPU2
CPU1
CPU2
CPU1
PWR I2C
UID
P2-DIMME1 P2-DIMMF2 P2-DIMMF1
P2-DIMMG2 P2-DIMMG1 P2-DIMMH2 P2-DIMMH1
P1-DIMMA2 P1-DIMMA1 P1-DIMMB1
P1-DIMMC1
P1-DIMMC2
P1-DIMMD1
P1-DIMMD2
USB4/5
USB8/9
SLOT1 PCI-E 3.0 X8
SLOT2 PCI-E 3.0 X8 SLOT3 PCI-E 3.0 X8
SLOT4 PCI-E 3.0 X8
SLOT5 PCI-E 3.0 X8
USB6
TPM/PORT80
BUZZER
SLOT6 PCI-E 3.0 X8
COM2
USB2/3
COM1
USB0/1
SP1
IPMI_LAN
Battery
JPW1
JPW2
24-Pin Main PWR
8-Pin PWR
JPW4
P2-DIMME2
JPW3
8-Pin PWR
4-Pin PWR
L-SAS4~7 L-SAS0~3
LSI SAS CTRL
Intel
PCH
JPS1
LAN
CTRL
BMC
X9DRD-7LN4F(-JBOD)/X9DRD-EF
Rev. 1.02
KB/Mouse
JBR1
JWD1
BIOS
CPU1
CPU2
OPEN1st
OPEN1st
Insert the desired number of DIMMs into the memory slots, starting with P1-
DIMMA1. For memory to work properly, follow the tables below for memory
population order. Refer to the motherboard layout (at left) for the location of
the DIMM slots.
Processors and their Corresponding Memory Modules
CPU# Corresponding DIMM Modules
CPU 1 P1-
DIMMA1 P1- DIMMB1 P1- DIMMC1 P1- DIMMD1 P1- DIMMA2 P1- DIMMB2 P1- DIMMC2 P1- DIMMD2
CPU2 P2-
DIMME1 P2- DIMMF1 P2- DIMMG1 P2- DIMMH1 P2- DIMME2 P2- DIMMF2 P2- DIMMG2 P2- DIMMH2
Processor and Memory Module Population for Optimal
Performance
Number of
CPUs+DIMMs CPU and Memory Population Configuration Table (For memory to work properly, please follow the instructions below.)
1 CPU &
2 DIMMs CPU1 P1-DIMMA1/P1-DIMMB1
1 CPU &
4 DIMMs CPU1 P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1
1 CPU &
5~8 DIMMs CPU1 P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1 + Any memory pairs in
P1-DIMMA2/P1-DIMMB2/P1-DIMMC2/P1-DIMMD2 slots
2 CPUs &
4 DIMMs CPU1 + CPU2 P1-DIMMA1/P1-DIMMB1, P2-DIMME1/P2-DIMMF1
2 CPUs &
6 DIMMs CPU1 + CPU2 P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1
2 CPUs &
8 DIMMs CPU1 + CPU2 P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/
P2-DIMMG1/P2-DIMMH1
2 CPUs &
10~16 DIMMs CPU1/CPU2 P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/
P2-DIMMG1/P2-DIMMH1 + Any memory pairs in P1, P2 DIMM slots
2 CPUs &
16 DIMMs CPU1/CPU2 P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/
P2-DIMMG1/P2-DIMMH1,P1-DIMMA2/P1-DIMMB2/P1-DIMMC2/P1-DIMMD2,
P2-DIMME2/P2-DIMMF2/P2-DIMMG2/P2-DIMMH2
OPEN1st
OPEN1st
Motherboard Layout and Features
CPU Installation
Socket Keys
CPU Keys
For X9DRD-7LN4F(-
JBOD)
1.
2.
DIMM Installation
1
5
1
14
1
4
1
8
1
13
1
3
1
7
1
12
1
17
1
18
1
19
1
20
1
2
1
6
1
11
1
16
1
21
1
31
1
36
1
41
1
37
1
42
1
43
1
44
1
45
1
38 1
39 1
40
1
33
1
34 1
35
1
27
1
28
1
29
1
30
1
22
1
23
1
24
1
25
1
1
Power Button
Blue+ (OH/Fan Fail/
PWR FaiL/UID LED)
1
NIC1 Link LED
Reset Button
2
Power Fail LED
HDD LED
FP PWRLED
Reset
PWR
3.3 V
ID_UID_SW/3/3V Stby
Red+ (Blue LED Cathode)
Ground
Ground
1920
3.3V
X
Ground NMI
X
NIC2 Link LED NIC2 Activity LED
NIC1 Activity LED
Jumpers/Connectors/LED Indicators
Connectors
1
15
1
46
Memory Support
Note 1: GLAN3/GLAN4 and SAS connections are available on the X9DRD-7LN4F(-JBOD).
Note 2: Refer to Chapter 2 of the user's manual for detailed information on memory support
and CPU/motherboard installation instructions.
Front Panel Control (JF1)
1
9
= mounting hole
Note: Item num-
bers are listed in
counterclockwise
order.
Note: Refer to Chapter 2 of the User Manual for detailed information on jumpers, connectors, and LED indicators.
Note: Graphics shown in this quick guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide.
Back Panel IO Connectors
1
26
1
32
1
10
COM1 GLAN1 VGA
GLAN3
GLAN2
GLAN4
UID
USB1
USB0 USB3 USB2
IPMI LAN
Heatsink Installation
Motherboard
Screw#1
Screw#4
Screw#2
Mounting Hole
Screw#3
1
47
1
48
LED Item Description State Status
LED2 32 Standby PWR LED Green: On Standby PWR On
LED3 7 Rear UID LED Blue: On Unit Identified
LEDM1 8 BMC Heartbeat LED Green: Blinking BMC Normal
Connector Item# Description
COM1/COM2 1, 9 Backplane COM Port1/Front Accessible COM2 Header
FAN1~8 40, 39, 38, 37, 36,
35, 14, 13 CPU/System Fan Headers
JBAT1 18 Onboard Battery (See Chpt. 3 for Used Battery Disposal)
JD1 30 Speaker/Power LED Indicator
JF1 31 Front Panel Control Header
JF2 29 LAN3 (NIC3)/LAN4 (NIC4) LED Indicators
JIPMB1 12 4-pin External BMC I2C Header (for an IPMI Card)
JL1 34 Chassis Intrusion
JOH1 28 Overheat LED Indicator
JPI2C1 45 Power Supply SMBbus I2C Header
JPW1 41 24-Pin ATX Main Power Connector
JPW2/3 42, 47 12V 8-Pin Power Connectors
JPW4 48 12V 4-Pin Power Connectors
JSD1 22 SATA DOM (Device on Module) Power Connector
JSTBY1 27 +5V Standby Power Header
JTPM1 17 TPM (Trusted Platform Module)/Port 80
LAN1/3, LAN2/4 4, 5 Gigabit LANPorts 1/2, 3/4 (LAN3/4 for -7LN4F(-JBOD))
(IPMI) LAN 2 IPMI_Dedicated LAN
(I)SATA1~6 23 Intel SATAConnectors 1~6 from the Intel PCH
(L)SAS0~3, 4~7 43, 44 Serial_Link SCSI Attached 2.0 Connectors 0~3, 4~7 from
the LSI SAS 2308 Controller (LAN3/4 for -7LN4F(-JBOD))
SP1 33 Onboard Buzzer (Internal Speaker)
(T-)SGPIO 1/2 26 Serial ATA(SATA) General Purpose I/O Header
UID 7 UID (Unit Identification) Switch
USB 0/1, 2/3 2, 3 Back Panel USB 0/1, 2/3
USB 4/5, 8/9 25, 24 Front Panel Accessible USB Connections (4/5, 8/9)
USB 6 21 TypeA USB Embedded Drive Connector
VGA1 6 Backpanel VGA Port
Jumpers
LED Indicators
This motherboard supports up to 512 GB of 240-pin Registered (RDIMM)/
Load Reduced (LRDIMM) ECC or 128 GB of Unbuffered (UDIMM) ECC/
Non-ECC DDR3 800/1066/1333/1600 MHz 4-channel (per CPU) memory in
16 DIMM slots.
Note: For memory optimization, use only DIMM modules that have been validated by
Supermicro. For the latest memory updates, please refer to our website at http://www.
supermicro.com/products/motherboard.