Supero H8DCT-HLN4F User manual

USER’S MANUAL
Revision 1.1
®
SUPER
H8DCT-HLN4F
H8DCT-HIBQF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this manual, or to notify
any person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE
OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL
NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall be
the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims
will not exceed the price paid for the hardware product.
FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.1
Release Date: February 12, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

Preface
iii
Preface
About This Manual
This manual is written for system integrators, PC technicians and knowledgeable PC
users.ItprovidesinformationfortheinstallationanduseoftheH8DCT-HLN4F/HIBQF
serverboard.
The H8DCT-HLN4F/HIBQF serverboard is based on the AMD® SR5670 or SR5690
and SP5100 chipset and supports two AMD Socket C32 type processors with up
to 192 GB of ECC RDIMM.
The differences between the features of the H8DCT-HLN4F and H8DCT-HIBQF
serverboards are shown in the table below.
Features H8DCT-HLN4F H8DCT-HIBQF
SR5690SP5100 Chipset Yes
SR5670/SP5100 Chipset Yes
InfiniBand® Controller Yes
2x 1Gb Ethernet LAN Yes
4x 1Gb Ethernet LAN Yes
Please refer to the motherboard specifications pages on our web site for updates on
supported processors (http://www.supermicro.com/aplus/). This product is intended
to be professionally installed.
Manual Organization
Chapter 1 includes a checklist of what should be included in your motherboard
box, describes the features, specifications and performance of the motherboard
and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read this
chapter when installing the processor(s) and memory modules and when installing
the motherboard in a chassis. Also refer to this chapter to connect the hard disk
drives, the various ports, and the power and reset buttons and the system LEDs.
If you encounter any problems, see Chapter 3, which describes troubleshooting
procedures for the video, the memory and the setup configuration stored in CMOS.
For quick reference, a general FAQ (Frequently Asked Questions) section is
provided. Instructions are also included for contacting technical support. In addition,
you can visit our web site for more detailed information.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.

iv
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL
Appendix A provides BIOS Error Beep Code Messages.
Appendix B lists BIOS POST Checkpoint Codes.

v
Standardized Warning Statements
About Standardized Warning Statements
The following statements are industry standard warnings, provided to warn the user
of situations which have the potential for bodily injury. Should you have questions
or experience difficulty, contact Supermicro's Technical Support department
for assistance. Only certified technicians should attempt to install or configure
components.
Read this section in its entirety before installing or configuring components in the
Supermicro chassis.
These warnings may also be found on our web site at http://www.supermicro.
com/about/policies/safety_information.cfm.
Battery Handling
Warning!
There is a danger of explosion if the battery is replaced incorrectly. Replace the
battery only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions
電池の取り扱い
電池交換が正しく行われなかった場合、破裂の危険性があります。交換する電池はメー
カーが推奨する型、または同等のものを使用下さい。 使用済電池は製造元の指示に従
って処 分して下さい。
警告
电池更换不当会有爆炸危险。请只使用同类电池或制造商推荐的功能相当的电池更
换原有电池。请按制造商的说明处理废旧电池。
警告
電池更換不當會有爆炸危險。請使用製造商建議之相同或功能相當的電池更換原有
電池。請按照製造商的說明指示處理廢棄舊電池。
Warnung
Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die
Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp.
Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers.
Standardized Warning Statements

vi
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL
Attention
Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer
que par une pile de type semblable ou équivalent, recommandée par le fabricant.
Jeter les piles usagées conformément aux instructions du fabricant.
!הרהזא
תנכס תמייקץוציפ.הניקת אל ךרדב הפלחוהו הדימב הללוסה לשףילחהל שי
גוסב הללוסה תאמםאותהתרבחלמומ ןרציתצ.
תוללוסה קוליסתושמושמהעצבל שי.ןרציה תוארוה יפל
ﺮﻄﺧ ﻙﺎﻨﻫﻦﻣﻝﺍﺪﺒﺘﺳﺍ ﺔﻟﺎﺣ ﻲﻓ ﺭﺎﺠﻔﻧﺍﺔﻳﺭﺎﻄﺒﻟﺍﺔﺤﻴﺤﺻ ﺮﻴﻏ ﺔﻘﻳﺮﻄﺑﻚﻴﻠﻌﻓ
ﺔﻳﺭﺎﻄﺒﻟﺍ ﻝﺍﺪﺒﺘﺳﺍ
ﻂﻘﻓﻉﻮﻨﻟﺍ ﺲﻔﻨﺑﺎﻬﻟﺩﺎﻌﻳ ﺎﻣ ﻭﺃﺎﻤﻛﺖﺻﻭﺃﺔﻌﻨﺼﻤﻟﺍ ﺔﻛﺮﺸﻟﺍ ﻪﺑ
ﺕﺎﻳﺭﺎﻄﺒﻟﺍ ﻦﻣ ﺺﻠﺨﺗﻟﺎﻘﻓﻭ ﺔﻠﻤﻌﺘﺴﻤﻟﺍﺔﻌﻧﺎﺼﻟﺍ ﺔﻛﺮﺸﻟﺍ ﺕﺎﻤﻴﻠﻌﺘ
Waarschuwing
Er is ontploffingsgevaar indien de batterij verkeerd vervangen wordt. Vervang de
batterij slechts met hetzelfde of een equivalent type die door de fabrikant aanbevolen
wordt. Gebruikte batterijen dienen overeenkomstig fabrieksvoorschriften afgevoerd
te worden.
경고!
배터리가 올바르게 교체되지 않으면 폭발의 위험이 있습니다. 기존 배터리와
동일하거나 제조사에서 권장하는 동등한 종류의 배터리로만 교체해야 합니다.
제조사의 안내에 따라 사용된 배터리를 처리하여 주십시오.
¡Advertencia!
Existe peligro de explosión si la batería se reemplaza de manera incorrecta.
Reemplazar la batería exclusivamente con el mismo tipo o el equivalente
recomendado por el fabricante. Desechar las baterías gastadas según las
instrucciones del fabricante.

Standardized Warning Statements
vii
Product Disposal
Warning!
Ultimate disposal of this product should be handled according to all national laws
and regulations.
製品の廃棄
この製品を廃棄処分する場合、国の関係する全ての法律・条例に従い処理する必要が
あります。
警告
本产品的废弃处理应根据所有国家的法律和规章进行。
警告
本產品的廢棄處理應根據所有國家的法律和規章進行。
Warnung
Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen
des Landes erfolgen.
¡Advertencia!
Al deshacerse por completo de este producto debe seguir todas las leyes y
reglamentos nacionales.
Attention
La mise au rebut ou le recyclage de ce produit sont généralement soumis à des
lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de
l'organisme compétent.
רצומה קוליס
!הרהזא
ותויחנהל םאתהב תויהל בייח הז רצומ לש יפוס קוליס.הנידמה יקוח
Waarschuwing
De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming
met alle nationale wetten en reglementen.
ﻲﺋﺎﻬﻨﻟﺍ ﺺﻠﺨﺘﻟﺍﻦﻣﺞﺘﻨﻤﻟﺍ ﺍﺬﻫﻪﻌﻣ ﻞﻣﺎﻌﺘﻟﺍ ﻲﻐﺒﻨﻳﻟﺎﻘﻓﻭﻊﻴﻤﺠﺔﻴﻨﻁﻮﻟﺍ ﺢﺋﺍﻮﻠﻟﺍﻭ ﻦﻴﻧﺍﻮﻘﻟﺍ ﺪﻨﻋ
경고!
이 제품은 해당 국가의 관련 법규 및 규정에 따라 폐기되어야 합니다.

viii
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL
Notes

ix
Table of Contents
Chapter 1 Introduction
1-1 Overview .........................................................................................................1-1
Checklist..........................................................................................................1-1
1-2 Contacting Supermicro....................................................................................1-2
1-3 Serverboard Features..................................................................................... 1-7
1-4 Chipset Overview.......................................................................................... 1-10
AMD AMD SR5670 or SR5690 and SP5100 Chipset.................................. 1-10
HyperTransport Technology.......................................................................... 1-10
1-5 PC Health Monitoring.................................................................................... 1-10
1-6 Power Configuration Settings.........................................................................1-11
1-7 Power Supply................................................................................................ 1-12
1-8 Super I/O.......................................................................................................1-12
Chapter 2 Installation
2-1 Static-Sensitive Devices..................................................................................2-1
Precautions .....................................................................................................2-1
Unpacking .......................................................................................................2-1
2-2 Processor and Heatsink Installation................................................................2-2
2-3 Mounting the Serverboard into a Chassis ......................................................2-4
2-4 Installing Memory............................................................................................ 2-4
Memory Support..............................................................................................2-5
Maximum Memory........................................................................................... 2-5
DIMM Module Population Configuration .................................................... 2-6
2-5 PCI Expansion Cards......................................................................................2-7
2-6 I/O Port and Control Panel Connections ........................................................2-8
2-7 Connector Definitions...................................................................................... 2-9
Fan Header ................................................................................................ 2-9
LAN1/2/3/4 (Ethernet Ports)....................................................................... 2-9
Unit Identifier Button................................................................................... 2-9
IPMB.........................................................................................................2-10
Overheat LED........................................................................................... 2-10
USB Headers ........................................................................................... 2-10
JP1 Adapter Card Connector................................................................... 2-10
Trusted Platform Module Header..............................................................2-11
SXB1 Adapter Card Slot/Connector..........................................................2-11
Table of Contents

x
2-8 Jumper Settings............................................................................................ 2-12
Explanation of Jumpers ................................................................................ 2-12
CMOS Clear............................................................................................. 2-12
I2C to PCI-Express Slots......................................................................... 2-13
BMC Jumper ............................................................................................ 2-13
VGA Enable/Disable................................................................................. 2-13
LAN Enable/Disable ................................................................................ 2-13
InfiniBand Port Enable/Disable ...............................................................2-13
Watch Dog Enable/Disable ...................................................................... 2-14
2-9 Onboard Indicators........................................................................................2-14
LAN1/LAN2/LAN3/LAN4 LEDs................................................................. 2-14
Power LED...............................................................................................2-14
Dedicated IPMI LAN LEDs .....................................................................2-15
InfiniBand LED Indicators.........................................................................2-15
IPMI LED.................................................................................................. 2-15
UID LED (LE1) ........................................................................................2-16
2-11 Enabling SATA RAID.....................................................................................2-17
Serial ATA (SATA)..........................................................................................2-17
Installing the OS/SATA Driver....................................................................... 2-17
Building a Driver Diskette.........................................................................2-17
Enabling SATA RAID in the BIOS................................................................. 2-18
Using the Adaptec RAID Utility..................................................................... 2-19
Installing the RAID Driver During OS Installation......................................... 2-19
2-12 Installing Drivers............................................................................................ 2-20
Supero Doctor III...........................................................................................2-21
2-13 Serverboard Battery...................................................................................... 2-23
Chapter 3 Troubleshooting
3-1 Troubleshooting Procedures...........................................................................3-1
Before Power On ............................................................................................3-1
No Power ........................................................................................................ 3-1
No Video .........................................................................................................3-2
Memory Errors ...............................................................................................3-2
Losing the System’s Setup Configuration.......................................................3-2
3-2 Technical Support Procedures........................................................................3-2
3-3 Frequently Asked Questions........................................................................... 3-3
3-4 Returning Merchandise for Service.................................................................3-4
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL

Table of Contents
xi
Chapter 4 BIOS
4-1 Introduction...................................................................................................... 4-1
4-2 Main Menu ...................................................................................................... 4-2
4-3 Advanced Settings Menu................................................................................4-2
4-3 Security Menu...............................................................................................4-15
4-4 Boot Menu.....................................................................................................4-16
4-5 Exit Menu...................................................................................................... 4-17
Appendix A BIOS Error Beep Codes
Appendix B BIOS POST Checkpoint Codes
B-1 Uncompressed Initialization Codes.................................................................B-1
B-2 Bootblock Recovery Codes.............................................................................B-2
B-3 Uncompressed Initialization Codes.................................................................B-3

Notes
xii
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL

Chapter 1: Introduction
1-1
Chapter 1
Introduction
1-1 Overview
Checklist
Congratulations on purchasing your computer motherboard from an acknowledged
leader in the industry. Supermicro boards are designed with the utmost attention to
detail to provide you with the highest standards in quality and performance.
Please check that the following items have all been included with your motherboard.
If anything listed here is damaged or missing, contact your retailer.
• One (1) H8DCT-HLN4F/HIBQF serverboard
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your motherboard.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety information:
http://super-dev/about/policies/safety_information.cfm
• If you have any questions, please contact our support team at:
[e-mail]

1-2
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL
1-2 Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Web Site: www.supermicro.com
Asia-Pacific
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: [phone]
Fax: [phone]
Email: [email protected]
Tel: [phone]
Web Site: www.supermicro.com.tw

Chapter 1: Introduction
1-3
Figure 1-1. H8DCT-HLN4F Image

1-4
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL
Figure 1-1. H8DCT-HIBQF Image

Chapter 1: Introduction
1-5
Notes:
Jumpers not indicated are for test purposes only.
Not all ports, jumpers or LED Indicators are available on all serverboards.
Figure 1-2. H8DCT-HLN4F/HIBQF Serverboard Layout
(not drawn to scale)
GPU_FAN1
KVM
JP1
JIPMB1
LE1
JB1
SPEAKER
JTPM1
DP2
JBT1
JOH1
JI2C2
JI2C1
JPB1
JIB1
JPL1 JWD1
JPG1
LAN2/LAN4
SXB1: PCI-E 2.0 X8
SLOT1 PCI-E 2.0 X16
UID
P2-DIMM1A P2-DIMM1C P2-DIMM1B
CPU1
P2-DIMM2B P2-DIMM2A P2-DIMM2C
CPU2
P1-DIMM2B
P1-DIMM2C
P1-DIMM2A
P1-DIMM1B
P1-DIMM1C
P1-DIMM1A
LAN1/LAN3 IPMI_LAN
USB2/3
InfiniBand BMC NIC
AMD
SP5100
AMD
SR5670
or
SR5690
BATTERY
DP1
LE2
LE3

1-6
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL
H8DCT-HLN4F/HIBQF Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear (See Section 2-8)
JIB1 InfiniBand Enable/Disable Pins 1-2 (Enabled)
JI2C1/JI2C2 I2C to PCI-E Slot Enable/Disable Open (Disabled)
JPB1 BMC Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 LAN 1/2 Enable/Disable (LAN 1/2/3/4 for
H8DCT-HLN4F) Pins 1-2 (Enabled)
JWD1 Watch Dog Enable/Disable Pins 1-2 (Reset)
LED Description
LAN Ports LEDs for the LAN Ethernet ports
Dedicated IPMI LAN LEDs for the dedicated IPMI LAN Ethernet port
LE1 LED for UID Button
LE2 InfiniBand Physical Link LED (Green) (H8DCT-HIBQF only)
LE3 InfiniBand Logical Link LED (Yellow) (H8DCT-HIBQF only)
DP1 LED for IPMI activity
DP2 LED for Serverboard Power-On
Connector Description
GPU FAN 1 GPU Fan Header
JIPMB1 System Management Bus Header (SMBus)
IPMI LAN Dedicated IPMI LAN Port
JB1 InfiniBand Connector
JOH1 Overheat Warning Header
JTPM1 Trusted Platform Module Header
JP1 SMC Proprietary Slot for Power, FP Control & SATA connectors
KVM Keyboard/Video/Mouse Port
LAN1/2/3/4 Gigabit Ethernet (RJ45) Ports
UID Unit Identifier Button
USB2/3 Universal Serial Bus (USB) Ports, Headers

Chapter 1: Introduction
1-7
1-3 Serverboard Features
CPU
• Dual AMD Opteron 4000 series (AMD Socket C32 type) processors
Note: Refer to our web site for details on supported processors.
Memory
• Up to twelve (12) slots of single/dual-channel DIMMs supporting up to 192 GB
of ECC RDIMM DDR3-1600/1333/1066 MHz speed SDRAM memory in
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size memory modules of 1.5V or
1.35V voltages.
Note: Refer to Section 2-4 before installing memory and our web site for recommended DIMMs.
Chipset
• AMD SR5670 (H8DCT-HLN4F) or SR5690 (H8DCT-HIBQF) chipset and one
SP5100 Southbridge chipset
Expansion Slots
• One (1) PCI-Express x16 Gen. 2
• One (1) PCI-Express x8 Gen. 2 (in x4 slot; for adapter card)
BIOS
• 16 Mb AMIBIOS® SPI Flash ROM
• DMI 2.3, PCI 2.2, ACPI 1.0 (ACPI 2.0 is BIOS supported), SMBIOS 2.3, Real
Time Clock Wakeup, Plug and Play (PnP), BIOS resume hot keys, Hardware
BIOS Virus Protection
PC Health Monitoring
• Onboard voltage monitors
• Fan status monitor with firmware/software on/off and speed control
• Watch Dog
• Environmental temperature monitoring via BIOS
• Power-up mode control for recovery from AC power loss
• System resource alert (via included utility program)
• Auto-switching voltage regulator for the CPU core
• CPU thermal trip support
• I2C temperature sensing logic
• Chipkill Support

1-8
H8DCT-HLN4F/HIBQF SERVERBOARD USER'S MANUAL
ACPI Features
• Microsoft OnNow
• Slow blinking LED for suspend state indicator
• BIOS support for USB keyboard
Onboard I/O
• Four (4) USB (Universal Serial Bus 2.0) ports (two via headers, two via KVM
ports)
• Up to four (4) LAN ports supported by one onboard Intel® i350 Ethernet
controller for 10/100/1000Base-T (Four for the H8DCT-HLN4F or two for
the H8DCT-HIBQF)
• One (1) dedicated IPMI LAN port
• One (1) KVM (VGA+COM+2*USB) port
• One Mellanox Connect-X2 InfiniBand port supporting a single QSFP connector
(only for H8DCT-HIBQF)
Other
• Onboard power LED
Utilities
• BIOS flash upgrade utility
• Super Doctor III
• IPMI 1.5 / 2.0
Dimensions
• Proprietary format: (LxW) 6.8" x 16.64" (173 x 423 mm)