MSI 5000P Master2 Series User manual

i
5000PMaster2Series
MS-9188 (V1.X)ServerBoard
G52-91881X1
9188v1.0-Preface.p65 2007/4/10, 午 02:401

ii
CopyrightNotice
The materialinthisdocumentistheintellectual propertyof MICRO-STAR
INTERNATIONAL.Wetakeeverycareinthe preparationof thisdocument, butno
guaranteeisgivenastothecorrectnessofitscontents.Ourproductsareunder
continualimprovementand wereservetherighttomakechangeswithoutnotice.
Trademarks
Alltrademarksarethepropertiesoftheirrespectiveowners.
Intel andPentium areregisteredtrademarksofIntelCorporation.
AMD,Athlon™,Athlon™XP,Thoroughbred™,andDuron™areregistered trade-
marksofAMDCorporation.
NVIDIA, theNVIDIAlogo,DualNet,and nForceareregisteredtrademarksortrade-
marksof NVIDIACorporationin theUnitedStatesand/orothercountries.
PS/2and OS /2areregisteredtrademarks ofInternationalBusiness Machines
Corporation.
Windows 95/98/2000/NT/XPareregisteredtrademarksofMicrosoftCorporation.
Netware isaregisteredtrademarkofNovell,Inc.
Award isaregisteredtrademarkofPhoenixTechnologiesLtd.
AMI isaregistered trademarkofAmerican MegatrendsInc.
RevisionHistory
Revision RevisionHistory Date
V1.0 Firstrelease April 2007
TechnicalSupport
Ifaproblemariseswithyoursystemandnosolutioncanbeobtainedfromtheuser’s
manual,pleasecontactyourplaceofpurchaseorlocaldistributor.Alternatively,
pleasetrythefollowing helpresourcesforfurtherguidance.
VisittheMSIwebsiteat http://www.msi.com.tw/program/service/faq/
faq/esc_faq_list.php forFAQ,technicalguide,BIOSupdates,driver
updates, and otherinformation.
Contactourtechnicalstaffat http://support.msi.com.tw/.
9188v1.0-Preface.p65 2007/4/10, 午 02:402

iii
SafetyInstructions
CAUTION: Dangerofexplosionifbatteryisincorrectlyreplaced.
Replaceonlywiththe sameorequivalenttype recommendedbythe
manufacturer.
1. Alwaysread thesafetyinstructionscarefully.
2. KeepthisUser’sManualforfuturereference.
3. Keepthisequipmentawayfromhumidity.
4. Laythisequipmentonareliableflatsurfacebeforesetting itup.
5. Theopeningsontheenclosureareforairconvectionhenceprotectstheequip-
ment fromoverheating.DONOTCOVERTHEOPENINGS.
6. Makesurethevoltageofthe powersourceandadjustproperly110/220Vbe-
foreconnectingtheequipmenttothepowerinlet.
7. Placethe powercordsuchawaythatpeoplecannotstepon it. Donotplace
anythingoverthepowercord.
8. AlwaysUnplug thePowerCordbeforeinsertinganyadd-oncardormodule.
9. All cautionsand warningsontheequipmentshouldbenoted.
10. Neverpouranyliquidintotheopeningthatcoulddamage orcauseelectrical
shock.
11. If anyofthefollowingsituationsarises,gettheequipmentcheckedbyservice
personnel:
†Thepowercordorplugisdamaged.
†Liquid haspenetratedintotheequipment.
†Theequipmenthasbeen exposedtomoisture.
†The equipmentdoesnotworkwelloryoucannotgetitworkaccordingto
User’sManual.
†Theequipmenthasdroppedand damaged.
†Theequipmenthasobvioussign of breakage.
12.DONOTLEAVETHISEQUIPMENTINANENVIRONMENTUNCONDITIONED,STOR-
AGETEMPERATUREABOVE600C(1400F),IT MAYDAMAGETHEEQUIPMENT.
9188v1.0-Preface.p65 2007/4/10, 午 02:403

iv
FCC-BRadio Frequency Interference Statement
Thisequipmenthasbeen
tested and found tocomply
withthe limitsforaClassB
digitaldevice,pursuanttoPart
15of the FCCRules.Theselimitsaredesignedtoprovidereasonable protection
againstharmful interferenceinaresidentialinstallation.Thisequipmentgenerates,
usesand canradiateradiofrequencyenergyand,ifnotinstalledand used in accor-
dancewiththeinstructions,maycauseharmful interferencetoradiocommunications.
However,thereisno guarantee thatinterferencewill notoccurin aparticular
installation.Ifthisequipmentdoescauseharmful interferencetoradioortelevision
reception,whichcanbedeterminedbyturning theequipmentoff and on,the useris
encouragedtotrytocorrecttheinterferencebyone ormoreof themeasureslisted
below.
†Reorientorrelocatethereceiving antenna.
†Increasetheseparationbetweentheequipmentand receiver.
†Connecttheequipmentintoanoutleton acircuitdifferentfromthatto
whichthereceiverisconnected.
†Consultthedealeroranexperiencedradio/televisiontechnicianforhelp.
Notice1
Thechangesormodificationsnotexpresslyapprovedbythepartyresponsible for
compliancecould void theuser’sauthoritytooperatetheequipment.
Notice2
Shieldedinterfacecablesand A.C.powercord,ifany,mustbeusedinorderto
complywiththeemissionlimits.
VOIRLANOTICED’ INSTALLATIONAVANTDERACCORDERAURESEAU.
Micro-StarInternational
MS-9188
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothe
followingtwoconditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustaccept anyinterferencereceived,includinginterferencethat
maycauseundesiredoperation.
9188v1.0-Preface.p65 2007/4/10, 午 02:404

v
WEEE (WasteElectricaland ElectronicEquipment) Statement
9188v1.0-Preface.p65 2007/4/10, 午 02:405

vi
9188v1.0-Preface.p65 2007/4/10, 午 02:406

vii
9188v1.0-Preface.p65 2007/4/10, 午 02:407

viii
CONTENTS
CopyrightNotice..............................................................................................................ii
Trademarks.......................................................................................................................ii
RevisionHistory..............................................................................................................ii
Technical Support...........................................................................................................ii
SafetyInstructions.........................................................................................................iii
FCC-B RadioFrequencyInterferenceStatement........................................................iv
WEEE(WasteElectricalandElectronicEquipment)Statement....................................v
Chapter1GettingStarted.....................................................................................1-1
MainboardSpecifications...................................................................................1-2
MainboardLayout................................................................................................1-4
Chapter2HardwareSetup....................................................................................2-1
Quick ComponentsGuide....................................................................................2-2
CPU(CentralProcessingUnit)............................................................................2-3
Memory.................................................................................................................2-6
BackPanel............................................................................................................2-8
PowerSupply......................................................................................................2-9
Connectors........................................................................................................2-10
Jumpers..............................................................................................................2-18
Slot......................................................................................................................2-20
Chapter3BIOSSetup.............................................................................................3-1
EnteringSetup.....................................................................................................3-2
The Menu Bar......................................................................................................3-4
Main......................................................................................................................3-4
Advanced............................................................................................................3-6
Power.................................................................................................................3-12
Security..............................................................................................................3-13
Health.................................................................................................................3-14
Boot....................................................................................................................3-14
Exit......................................................................................................................3-16
AppendixAIntelSATARAID.................................................................................A-1
Introduction..........................................................................................................A-2
BIOSConfiguration..............................................................................................A-2
Installing Software..............................................................................................A-8
RAIDMigrationInstructions...............................................................................A-14
DegradedRAIDArray........................................................................................A-22
9188v1.0-Preface.p65 2007/4/10, 午 02:408

1-1
Getting Started
Chapter1
Getting Started
Thankyou forchoosingthe5000PMaster2(MS-9188v1.
X),anexcellentSSIserverboardfromMSI.
Basedontheinnovative Intel 5000P &ESB2 control-
lersforoptimal systemefficiency,the5000PMaster2
accommodatesthelatest Intel Dempsey/
Woodcrest/Clovertown/ Harpertown processor
in LGA771 packageandsupportsup toeight240-pin
registeredECC DDR2533/667 FB-DIMM slotstopro-
videthemaximumof 32GBmemorycapacity.
Intheentry-levelandmid-rangemarketsegment,the
5000PMaster2 can provideahigh-performancesolu-
tion fortoday’sfront-end and general purposeserver,
aswellasin thefuture.
9188v1.0-1.p65 2007/4/10, 午 02:401

MS-9188ServerBoard
1-2
MainboardSpecifications
Processor
-Intel Dempsey/Woodcrest/ Clovertown/HarpertowninSocket
LGA771
-Supports3/4-pinCPUfanheaderwithfanspeedcontrol
SupportedFSB
-1066/1333MHz
Chipset
-NorthBridge:Intel 5000P
-SouthBridge:Intel ESB2
Memory
-DDR2533/667 SDRAM(32GBMax)
-8DDR2FB-DIMM slots(240pin/1.8V,ECC)
LAN
-Intel 82571EBdualport GigabitEthernetPMCControllerwith
pluggableSFPtransceiverssupporting bothfiberand copper
-GbELANportx8(RJ-45x4&MiniGBICSFPx4)
IDE
-1IDEport
-SupportsUltraDMA66/100mode
SATA
-FourSATAII portssupportfourSATAII devices
-Supportsstorageand datatransfersatup to300 MB/s
SystemManagement
-RenesasH8S/2168VIPMImicrocontroller
Graphics
-XGIZ7graphicscontroller
-Onboard16MBVideoSDRAM
9188v1.0-1.p65 2007/4/10, 午 02:402

1-3
Getting Started
Connectors
BackPanel
-1serialport
-2USB 2.0ports
-4SFPGigabitLANports
-4RJ-45 GigabitLANports
OnboardPinheaders
-1VGAconnector
-1serialportconnector
-1mouse/keyboardportconnector
-1frontpanelconnector
-2USB2.0connectors
Slots
-1PCI Expressx16 slot
-164-bit/133MHzPCI-Xslot
FormFactor
-SSI formfactor:394 x330 mm
Mounting
-9mountingholes
OptionalExpansionCards
lMS-95N1LANDaughterCard
-4copperportssupportedbyIntel82571 GbELANchip
lMS-95N2LANDaughterCard
-4opticalportssupportedbyIntel82571GbELANchip
lMS-95N3LANDaughterCard
-2copperportssupportedbyIntel82571 GbELANchip
-2copperportssupportedbyIntel82563 GbELANchip
9188v1.0-1.p65 2007/4/10, 午 02:403

MS-9188ServerBoard
1-4
lMS-95N4LANDaughterCard
-2opticalportssupportedbyIntel82571GbELANchip
-2copperportssupportedbyIntel82563 GbELANchip
lMS-95N5LANDaughterCard
-4opticalportssupportedbyBroadcom5715SGbELANchip
lMS-95N6PCI-EDaughterCard
-2PCI-Ex8slots+1PCI-E x16 slot
lMS-95N7BridgeBoard
-Bridge boardtoconnectMainboardandDaughterboard
lMS-95N9PCI-XRiserCard
-1to3PCI-X slots
lMS-95N0PCI-XRiserCard
-1to1PCI-X slot
Formore informationoncompatible components,please visit
http://www.msi.com.tw/program/products/server/svr/pro_svr_qvl.php

1-5
Getting Started
5000PMaster2 (MS-9188 v1.X) SSIServer Board
MainboardLayout
B
A
T
T
+
B
I
O
S
DIMM42
CPU1
CPU2
SYSFAN1 JPWR1
CPUFAN1
CPUFAN2
SYSFAN5
SYSFAN4
CF1
IDE1
SATA2
COM2
JCF_SEL JCFV_SEL
XGI
Z7
Winbond
W83627EHG
J6
JBAT1
J8
JPBTN1
JUSB2JUSB1
JLPC1J11
PCIX_SLOT1
JT1
JFP1
JLANLED1
SATA1
SATA4 SATA3
SYSFAN2
SYSFAN3
JPWR2
DIMM32
DIMM22
DIMM12
DIMM41
DIMM31
DIMM21
DIMM11
LAN2
VGA1
COM1
USB1
LAN6
LAN5
LAN8
LAN7
LAN1
LAN4
LAN3 J1
JPWR3
Intel
82571EB
Intel
82571EB
Intel
ESB2
Intel
5000P
J5
PCIEX16_SLOT1
9188v1.0-1.p65 2007/4/10, 午 02:405

MS-9188ServerBoard
1-6
9188v1.0-1.p65 2007/4/10, 午 02:406

2-1
HardwareSetup
Chapter2
HardwareSetup
Thischapterprovidesyou withtheinformation about
hardwaresetupprocedures.Whiledoingthe installation,
becarefulinholdingthecomponentsandfollowthe
installationprocedures.Forsomecomponents,ifyou
install inthewrong orientation,thecomponentswillnot
workproperly.
Useagroundedwrist strapbeforehandlingcomputer
components.Staticelectricitymaydamagethe
components.
9188v1.0-2.p65 2007/4/10, 午 02:401

2-2
MS-9188ServerBoard
Quick ComponentsGuide
JPWR2, p.2-9
BackPanel
I/O, p.2-8
JPWR1,p.2-9
DDR2DIMMSlots, p.2-6
COM2,
p.2-15
SYSFAN2/3,
p.2-15
CPU, p.2-3
CPUFAN2,
p.2-15
JUSB1/2,
p.2-16
CPUFAN1, p.2-15
B
I
O
S
SYSFAN1,
p.2-15
SYSFAN4/5,
p.2-15
JPWR3,p.2-9
VGA1, p.2-14
PCI-Class
Slots, p.2-20 J8,p.2-18
SATA1~4,
p.2-12
JBAT1,
p.2-18
J5,p.2-19
IDE1, p.2-10
J6,p.2-14
J11,p.2-12
JPBTN1,
p.2-13
JLANLED1, p.2-17
JFP1,
p.2-13
CF1, p.2-11
JCF_SEL,
JCFV_SEL,
p.2-19
9188v1.0-2.p65 2007/4/10, 午 02:402

2-3
HardwareSetup
CPU(CentralProcessingUnit)
Important
1.OverheatingwillseriouslydamagetheCPUandsystem.Alwaysmake
surethecoolingfancanworkproperlytoprotecttheCPUfromoverheating.
2.Makesurethatyouapplyan evenlayerofheatsinkpaste(orthermal tape)
between theCPUand the heatsinktoenhanceheatdissipation.
3.Whilereplacing theCPU,always turnoff the powersupplyorunplugthe
powersupply spowercordfromthegroundedoutletfirsttoensurethe
safetyofCPU.
The mainboardsupports Intel Dempsey/Woodcrest/Clovertown/Harpertown
processorsinSocket LGA771.When youareinstalling theCPU, makesurethe
CPUhasaheatsinkandacoolingfanattachedonthetoptoprevent
overheating. Ifyoudonothavetheheatsinkandcoolingfan,contactyourdealerto
purchaseand install thembeforeturning onthecomputer.
Formoreinformationoncompatiblecomponents,pleasevisit http://www.msi.com.
tw/program/products/server/svr/pro_svr_qvl.php .
Introduction toLGA771 CPU
The pin-pad sideofLGA771CPU.
YellowtriangleisthePin1indicator
Alignment Key
Alignment Key
YellowtriangleisthePin1indicator
Thesurfaceof LGA771 CPU.
Remembertoapplysomesilicone
heattransfercompoundonitfor
betterheatdispersion.
9188v1.0-2.p65 2007/4/10, 午 02:403

2-4
MS-9188ServerBoard
4. Afterconfirming theCPUdirection
(indicated belowwithredcircles)
forcorrectmating,putdownthe
CPUinthesockethousing frame.
Besuretograspon the edgeof
the CPUbase. Notethatthe align-
mentkeysarematched.
1. LocatetheCPUsocket. 2. Raisetheloadleverup toitsfull extent.
3. Opentheloadplate.
5. VisuallyinspectiftheCPUisseatedwellintothesocket. Ifnot,takeout theCPU
withpureverticalmotionand reinstall.
6. Covertheloadplateontothepackage.
7. Pressdowntheload leverlightlyontotheloadplateandthen securethelever
withthehookundertheretentiontab.
Yellowtriangle
Alignment Key
SocketLGA771 CPUInstallation
9188v1.0-2.p65 2007/4/10, 午 02:404

2-5
HardwareSetup
Installing theIntel CPUCooler
CPUcoolerbackplate
6.ScrewtosecuretheCPUcooler.
7.InstallanotherCPUfansinkif
necessary.
5.ConnecttheCPUfanpowercordto
CPUFAN1.
Note:Ifdualprocessorsareinstalled,
connectthesecond CPUfanpower
cordtoCPUFAN2.
1.Flip overthe mainboardand locatethepositionof theCPUsockets.
2.Install thebackplatestothebackof theCPUsocketswithholesaligned.
3.InstalltheCPU(s)followingthein-
structionsonpage2-4.
4.Applysomeheatpastealloverthe
topof theCPUandplacethecooler
ontoit.
Mainboardphotosshowninthissec-
tion arefordemonstrationonlyand may
differfromthe actuallookofyour
mainboard.
9188v1.0-2.p65 2007/4/10, 午 02:405

2-6
MS-9188ServerBoard
Memory
Important
1.Toenable successfulsystemboot-up,alwaysinsertthe memorymodules
intothe DIMM11first(channel1/1st).
2.Makesurethatyou installmemorymodulesofthesametypeanddensity
underdual-channelmode.
DIMM42
DIMM41
DIMM32
DIMM31
DIMM22
DIMM21
DIMM12
DIMM11
Channel4
Channel1
Channel2
Channel3
Dual
Channel
Dual
Channel
Dual-Channel ModePopulation Rule
InDual-Channel mode,thememorymodulescantransmitand receivedatawithtwo
databuslinessimultaneously.Enabling Dual-Channelmode canenhancethesystem
performance.Pleaserefertothefollowingillustrationsforpopulationrulesunder
Dual-Channel mode.
TheseDIMM slotsareintendedforsystemmemorymodules.
Formoreinformationoncompatiblecomponents,pleasevisit http://www.msi.com.
tw/program/products/server/svr/pro_svr_qvl.php.
68x2=1363 pin 52x2=104 pin
DDR2
240-pin,1.8V
9188v1.0-2.p65 2007/4/10, 午 02:406