Supoin S59 series User manual

Mobile Intelligent Terminal
Manual Instruction V1.0 Version
Android Operation Manual

Page 01
Chapter I Introduction to S59 Device 02
.....................................................
1.1 System overview ..................................................................................
Chapter II Introduction to Product Appearance 05
.....................................
Chapter IV Application Software 17
.............................................................
Chapter III System Setting 06
........................................................................
02
1.2 Applicable industries
1.3 Product parameters
.............................................................................
..............................................................................
02
03
2.1 Appearance view .................................................................................. 05
3.1 Terminal operation interface ................................................................. 06
3.2 Wireless network
3.3 Device Management
3.4 Personal information .............................................................................
07
09
12
3.5 System information 13
4.1 Scanner
................................................................................................. 17
...............................................................................
.............................................................................
..................................................................................
Chapter V Common Problems 18
..................................................................
5.1 How to deal with the issue of device can’t connect to Internet?
5.2 How to make device scan 1D/2D barcode when you
power on the device?
........
...................................................................................
18
19
Chapter VI Precautions and Maintenance 20
..............................................
The information included in the document is to introduce the present
condition of the product without the meaning of guarantee, including
but not limited to any suggestibility or vendibility guarantee, or
guarantee applicable to a special purpose, and the content is possible
to be altered at any time, which shall not be noticed additionally.
The file includes the exclusive patent information protected by the
Copyright Law, all right reserved. Apart from the part allowed by the
Copyright Law, without the written agreement, part or all the content
shall not be photocopied, reproduced, modified or translated.
Authorization statement
Copyright Statement 01
.................................................................................
Contents

Page 02 Page 03
Chapter I Introduction to S59 Device
S59 product is an industrial hand-held terminal independently researched and
developed, designed and produced according to the industrial characteristics.
Its appearance is adopt the ergonomic design, with the light, flexible, anti-
vibration and anti-dropping features, as well as long standby time and stable
operating system. SHT59 product is in accordance with IP65 industrial standards
for water-proofing, dust-proofing, anti-dropping, anti-static and high & low
temperature resistance design.
1.1 System overview
Hello!
Thanks for choosing our S59 series products.
Please read the user manual carefully to learn more about our
products' features. The products are subject to upgrade from
time to time, so please contact us for the latest version. This
manual is for reference only.
1.3 Product parameters
Performance parameters
Operating system
Processor
Android 6.0
MTK octa-core 1.3GHz
Memory 1G RAM+8G ROM/2G RAM+16G ROM
Physical parameters
Display screen 3.5" 480×640 Capacitive Touch HD LCD
Dimensions L 210 x W 79 x T 28mm
Weight 360g (including standard battery)
battery Demountable 3.8V 3280/5300mAH polymer lithium battery
(supportive RTC battery)，with over 8 hours regular use time.
Standby time >200 hours
Keyboard 52 regular keys, 1 power key, 1 reset key, 2 sides keys
Camera Rear 13 million pixels, support flash lamp, automatic focusing
and video
Interface 1 industrial USB2.0, Micro SD/TF slot, SIM card slot
Power Adapter Input：AC 100～220V 50/60HZ；Output：DC 2.5A
Input method English, pinyin and handwriting input
Audio Loudspeaker, headphones, microphone (optional) and
earphone (optional)
Way of notification Speaker, indicator light and vibration
It is mainly applicable for warehouse, channel, logistics, drug supervision, retail
industry and other fields.
1.2 Applicable industries

Page 05Page 04
Chapter 2 Product Appearance
2.1 Appearance view
WIFI, support IEEE 802.11 a/b/g/n(optional)
Data communication parameters
Bluetooth 4.0
WIFI
GPRS/EVDO/TD-SCDMA/WCDMA/TD-LTE/TDD-LTE/FDD-LTE
WWAN
Bluetooth
High-accurate GPS, support A-GPS and BeiDou (optional)
GPS
Decoding ability
1D laser /2D image scan engine
scanning precision：≥ 3mil
Depth of field：3cm-70cm
(Depends on barcode density and type）
UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5,
Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.; PDF417,
MicroPDF417, Composite, RSS, TLC-39, Data matrix, QR code,
Micro QR code, Aztec, Postal Codes: US PostNet; US Planet;
UK Postal, Japan Postal Dutch Postal (KIX), etc.
Keyboard toggle key
（Switch to the orange keys）
Key Reset Keyboard Backlight Key
Power Key
Keyboard toggle key
（Switch to the white keys）
Temperature -10℃～50℃（Working） -20℃～70℃（Storage）
Electrostatic ±15kV Air , ±8kV Contact
Relative humidity 5%～95%RH
IP65Protection grade
Anti-dropping
height
Bear the impact of dropping to smooth cement ground
from the height of 2.5m
Environmental parameters
Anti-rolling
strength
Almost 1000 times for rolling within the scope of 1m
(impact force)
Front view Rear view Left view Right view
Top view
Bottom view
13.56MHz, support ISO14443 A&B and ISO15693 protocols (optional)
NFC

Page 07Page 06
Chapter III System Setting
3.1 Terminal operation interface
3.1.1 After power on, enter the following main operation interface.
Introduce the software function of S59 series devices in detail.
Key ResetPower Key
Keyboard toggle key
（Switch to the orange keys）
Keyboard toggle key
（Switch to the blue keys）
3.1.2. Under the standby interface, click this icon and select option to
enter into the system setting.
Wi-Fi
Click the setting button and icon to open the wireless network, and all available
wireless networks will display, then click on the wireless network you want to connected.
If the wireless network does not need password, click ‘Connect’ for starting connection;
If the wireless network does need password, input password firstly and click ‘Connect’
for starting connection. If the wireless network has been successfully connected previously,
the information would be stored, and the automatic connection would be realized. Once
the device connect to the wireless network successfully, the wireless network icon
will display in the status bar on the top of screen.
3.2 Wireless network

Page 09Page 08
Bluetooth
Data Usage
Select to open/ close the mobile data, and set up limit of mobile data.
Sound and Notification
For the settings of volume, ringtone and message, tick or not tick to select or cancel
Vibration and Ring, Touch sounds, Screen lock sound and Vibrate on touch.
3.3 Device Management

Page 11Page 10
Storage
Check available storage space, and select the options for media scanning for external
memory card or external USB device.
Display
LCD brightness level, Wallpaper, Sleep mode and Font size.
Battery
Display battery information.
Apps
Manage application program. Click on the catalog (downloaded, SD card, running or all)
and select an application you want to uninstall, you will enter the following interface and
then click ‘uninstall’ to remove the application from the hand-held terminal device.

Page 13Page 12
Location
3.4 Personal information
Security
Set Screen lock, Owner info, Encryption and Device administrators.
Language and Input
For the options of language selection, text input and automatic error correction. Select
the keyboard and input method you like, and set the ‘Text-to-speech output’.
Backup and Reset

Page 15Page 14
Data and Time
You can use the time or time zone offered by the network, or set the date and time
manually, then select the time zone, or you also can select the display format of time and
date.
3.5 System information
Scheduled power on /off
Developer Options
Some other information of hand-held terminal device.
Accessibility

Page 17Page 16
About Device
Click on this option to acquire the relevant information of hand-held terminal device.
Chapter IV Application Software
4.1 Scanner
Set ‘Settings->Scanner’ in the main operating interface.

Page 19Page 18
Output Mode:
1. Copy and Paste: The scanned barcode data will display on the current cursor position,
and it can output full-character barcode data information, including Chinese character
barcode.
2. Key Emulation: The scanned barcode data will display on the current cursor position,
but don’t output non-keyboard characters data, such as Chinese character barcode
data information.
3. API: Get barcode data through Application Program Interface.
Enter Event:
1. Enter : Add to ‘Enter’ in the scanning results to end the event.
2. Space : Add to ‘Space’ in the scanning results to end the event.
3. Tab: Add to ‘Tab’ in the scanning results to end the event.
4. None: Don’t add any ending character in the scanning results.
Chapter V Common Problems
5.1 How to deal with the issue of device can’t connect to Internet?
1. Please detect whether there is a WIFI signal identification at the
top right corner.
2. Please detect whether the device is within the scope of network coverage
and connected to the effective AP.
3. The WIFI connection setting interface, with the wireless network ->Wi-Fi
(wireless internet).
5.2 How to make device scan 1D/2D barcode when you power
on the device?
1. Please check whether the automatic scanner of scanning function was enabled.
2. Ensure the following settings

Page 20
Chapter VI Precautions and Maintenance
Please carefully use your device with the excellent design and technology. The
following suggestions can help you use the warranty service effectively .
1.Please use the device according to this Manual, rather than trying to adopt other
methods.
2. Keep the device dry, to prevent the circuit board from corrosion, causing the
failure on power-on and other problems due to put the device in humid place for
a long time
3.Keep the device clean and do not store it on the dust or dirty place for a long time.
Thus, it may cause the failure of terminal on power-on or other problems.
4.Do not put the device on the overheating or over-cooling place for a long time
5.Do not forcefully knock or drop the device
6. Do not disassemble the device casually.
The correct usage method and maintenance of equipment can help you better
make use of product performance. Among the problems reflected by many clients,
most of them are caused due to the improper operation or inattention of maintenance.
In case of any abnormal operation, it is suggest to read this Manual carefully or
contact R&D personnel.