Honeywell HX2 User manual

HX2
Wearable Computer
Microsoft® Windows® CE 5 Operating System
User's Guide

Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this
document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have
been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
© 2007-2012 Honeywell International Inc. All rights reserved.
Web Address: www.honeywellaidc.com
RFTerm is a trademark or registered trademark of EMS Technologies, Inc. in the United States and/or other countries.
Microsoft®Windows, ActiveSync®, MSN, Outlook®, Windows Mobile®, the Windows logo, and Windows Media are
registered trademarks or trademarks of Microsoft Corporation.
Intel®and Intel XScale®are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States
and other countries.
Summit Data Communications, Inc. Summit Data Communications, the Summit logo, and “The Pinnacle of Performance” are
trademarks of Summit Data Communications, Inc.
The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc.
Symbol®is a registered trademark of Symbol Technologies. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the
Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
Wavelink®, the Wavelink logo and tagline, Wavelink Studio™, Avalanche Management Console™, Mobile Manager™, and
Mobile Manager Enterprise™ are trademarks of Wavelink Corporation, Kirkland.
Acrobat®Reader © 2012with express permission from Adobe Systems Incorporated.
Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies
and are the property of their respective owners.
Patents
For patent information, please refer to www.honeywellaidc.com/patents.
Limited Warranty
Refer to www.honeywellaidc.com/warranty_information for your product’s warranty information.

Table of Contents
Chapter 1: Introduction 1-1
About this Guide 1-1
Laser Warnings and Labels 1-2
Label 1-2
Components 1-3
Front 1-3
Alpha Mode 3 Tap Keypad 1-3
Dual Alpha Keypad 1-3
Triple Tap Keypad 1-4
Back 1-5
Connectors 1-6
Ring Scanner / Audio / Battery Connector 1-6
Cradle Connector 1-6
Ring Scanner and Ring Imager 1-7
Cables 1-8
Battery and HX2 Connector 1-8
Audio, Battery and HX2 Connector 1-8
Ring Scanner Extended Cable 1-8
Li-Ion Battery 1-9
Battery Connectors 1-9
Standard Battery 1-9
Extended Battery 1-10
Status LEDs 1-11
System Status LED 1-11
Alpha mode Status LED 1-11
Bluetooth Status LED 1-11
Using the Input Panel / Virtual Keyboard 1-12
Chapter 2: Set Up A New HX2 2-1
Quick Start - Assembly 2-1
End User License Agreement (EULA) 2-1
Assemble the Armband 2-2
Connect the Ring and Battery Cables 2-3
Battery 2-3
Ring Scanner/Imager 2-4
Attach HX2, Ring and Battery to Armband 2-4
Final Assembly 2-5
Attach Ring to Finger 2-6
Voice Case Assembly 2-7
i

Slip the HX2 into the Rubber Boot 2-9
Assemble the HipFlip 2-10
Connecting the Headset Cable 2-11
Adjust Headset / Microphone and Secure Cable 2-12
Connect / Disconnect Battery 2-13
Connect Battery 2-13
Disconnect Battery 2-13
Tapping the Touchscreen with a Stylus 2-14
Set Date and Time Zone 2-15
Grab Time Utility 2-15
Autolaunch Time-Sync 2-15
Synchronize with a Local Time Server 2-15
Set Speaker Volume 2-16
Using the Keypad 2-16
Using the Control Panel 2-16
Set Power Scheme Timers 2-17
Battery Power Scheme 2-17
AC Power Scheme 2-17
Touchscreen 2-18
Calibrating the Touchscreen 2-18
Adjusting the Display Backlight Timer 2-18
Apply the Touchscreen Protective Film 2-18
Setup Terminal Emulation Parameters 2-19
Using the AppLock Switchpad 2-20
Using the Keypad 2-20
Using the Touchscreen 2-20
Connecting Bluetooth Devices 2-21
Taskbar Connection Indicator 2-21
LED Connection Indicator 2-21
Reboot 2-22
Warm Boot 2-22
Cold Boot 2-22
Cleaning the Touchscreen and Scanner Aperture 2-23
Startup Help 2-24
Continuous Scan Mode 2-24
Chapter 3: Product Agency Compliance - HX2 3-1
Laser Light Safety Statement 3-3
Important Safety Warnings - Desktop Cradle 3-5
Chapter 4: Technical Assistance 4-1
ii

Chapter 1: Introduction
The HX2 is a small, lightweight mobile computer designed to be worn on a person’s arm or waist. The HX2 is most useful for
applications that require computational support while the user's hands are actively engaged with the physical environment,
including piece picking to carts, containers or conveyers; case picking; parcel moves; and broken case activities.
The HX2 can be docked in the HX2 Cradle. The HX2 batteries can be re-charged while the HX2 is in the cradle. The batteries
are also re-charged in the HX2 Battery Charger. When the HX2 is docked in a powered cradle, connection is broken between
the tethered battery and the HX2. The HX2 begins receiving power through the powered cradle connector. It may be necessary
to wake the HX2 from Suspend when it is inserted in the cradle.
About this Guide
This HX2 User's Guide provides instruction for the end-user or system administrator to follow when setting up a new HX2.
This user's guide has been developed for aHX2with a Microsoft® Windows® CE 5operating system.
1-1

Laser Warnings and Labels
lDo not look into the laser’s lens.
lDo not stare directly into the laser beam.
lDo not remove the laser caution labels from the HX2.
lDo not connect the laser bar code aperture to any other device. The laser bar code aperture is certified for use with the
HX2 only.
Caution
Laser radiation when open. Please read the caution labels. Use of controls, adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure.
Ring Scanner and Ring Imager Caution Label – Class 2 Laser Scanner
The laser light label is located on the side of the ring scanner and ring imager.
Label
1-2

Components
Front
Note: Alpha Mode LED is not used with the Dual Alpha Keypad and the Triple Tap Keypad.
Alpha Mode 3 Tap Keypad
1. On / Off Button
2. System Status
LED
3. Microphone
4. Bluetooth LED
5. Speaker
6. Alpha Mode LED
7. Enter Button
Dual Alpha Keypad
1. On / Off Button
2. System Status
LED
3. Microphone
4. Bluetooth LED
5. Speaker
6. Alpha Mode LED
7. Enter Button
A. Green Button
B. Orange Button
C. Blue Button
1-3

Triple Tap Keypad
1. On / Off Button
2. System Status
LED
3. Microphone
4. Bluetooth LED
5. Speaker
6. Alpha Mode LED
7. Enter Button
A. Green Button
B. Orange Button
C. Blue Button
1-4

Back
Wear on Left Side, Ring on Left Hand Wear on Right Side, Ring on Right Hand
1. Ring Scanner Tether cable channel
2. Retaining Clip for Ring Scanner Tether Connector
3. Ring Scanner cable connector
4. Battery Cable connector
5. Retaining Clip for Tethered Battery Connector
6. Tethered Battery Cable channel
7. Cradle Connector
1. Tethered Battery Cable channel
2. Retaining Clip for Tethered Battery Connector
3. Battery Cable connector
4. Ring Scanner cable connector
5. Retaining Clip for Ring Scanner Tether Connector
6. Ring Scanner Tether cable channel
7. Cradle Connector
1-5

Connectors
Ring Scanner / Audio / Battery Connector
Connector 1 is on the left.
Connector 2 is on the right.
Both connect to cables for:
lTethered Ring Scanner (Laser or Imager)
lTethered Headset / Microphone and Battery
lTethered Battery
Cradle Connector
Connector 3 is at the base of the HX2. It connects to the Cradle. When the HX2 is in a powered cradle, the HX2 receives
external power through the Cradle connector.
USB Keyboard or USB Mouse input is received through the Cradle connector when the HX2 is in the HX2cradle.
1-6

Ring Scanner and Ring Imager
The trigger module and ring strap module are user replaceable.
1. Scan Window
2. Trigger
3. Ring Strap
4. Connector
Laser Scanner
1. Illumination LEDs
2. Scan Window
3. Trigger
4. Ring Strap
5. Connector
Laser Imager
1-7

Cables
Battery and HX2 Connector
Audio, Battery and HX2 Connector
Ring Scanner Extended Cable
1-8

Li-Ion Battery
Main battery charging is handled exclusively by the HX2 Battery Charger/analyzer and the battery charger integrated into the
HX2powered cradle.
The Standard battery is much thinner than the Extended battery.
Each battery will fit in the battery sleeve on an armband, hip flip and the voice case.
Note: Do not allow water or chemical cleaning agents of any kind to come in contact with the battery
charging contacts or the battery cable connector; they may be damaged. If necessary, clean them
with a soft-bristle, dry brush or compressed air.
Battery Connectors
1. Battery Charge/Connect Terminals
2. Battery Cable Connector
Note: When placing the tethered battery in an armband or hip flip battery sleeve, ensure the Battery
Charge/Connect terminals are protected from accidental damage by keeping them covered by the
sleeve fabric at all times.
Standard Battery
1-9

Extended Battery
1-10

Status LEDs
LEDs (Light Emitting Diodes) are located on the front of the HX2. They are:
1. System Status LED indicates power management status.
2. Alpha Mode Status LED applies to the Alpha Mode 3 tap keypad only.
3. Bluetooth Status LED applies to Bluetooth client functions.
System Status LED
Blinking Red Main battery power fail; critical suspend mode
Steady Red Main battery low. If the main battery is not replaced with a fully charged battery before the internal
battery fails, the HX2 is turned Off.
Blinking Green Display turned off.
Off HX2 is Off (both batteries depleted) or the HX2 is in Suspend mode
Alpha mode Status LED
lSteady Amber when alpha mode enabled.
Bluetooth Status LED
Blinking Slowly Bluetooth is paired but not connected to a device.
Blinking Medium Bluetooth is paired and connected to a device.
Blinking Fast Bluetooth is discovering Bluetooth devices.
Off Bluetooth hardware has been turned off or it does not exist in the HX2.
1-11

Using the Input Panel / Virtual Keyboard
The virtual keyboard is always available when needed e.g. text entry.
Place the cursor in the text entry field and, using the stylus:
lTap the Shift key to type one capital letter.
lTap the CAPS key to type all capital letters.
lTap the áü key to access symbols.
Some applications do not automatically display the Input Panel. In this case, do the following to use the Input Panel:
Input Panel icon in the taskbar
Keyboard icon in the taskbar
lTap the Input Panel or Keyboard icon in the taskbar.
lSelect Keyboard from the menu.
lMove the cursor into the text entry field when you want to enter data using the Input Panel.
When finished entering data, tap the icon in the Taskbar again. Select Hide Input Panel.
1-12

Chapter 2: Set Up A New HX2
This page lists a quick outline of the steps you might take when setting up a new HX2. More instruction for each step is listed
later in this guide. Please refer to the HX2Reference Guide for additional information and instruction.
Contact your representative if you need additional help.
Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary,
protect the work surface, the HX2, and components from electrostatic discharge.
Quick Start - Assembly
Fasten the armband to your left or right arm before continuing with these directions.
1. Slide the battery into the battery sleeve on the armband.
2. Snap all tethered devices to the connectors at the back of the HX2.
3. Snap the HX2 into the armband mounting bracket.
4. Attach the battery cable to the battery.
5. Connect audio devices, if included.
6. Slip the ring scanner (if included) over one of your fingers, making sure your thumb or trigger finger can easily reach the
Scan button.
7. Adjust the HX2 arm assembly for comfort. Occasionally check all connectors for stability.
The wearable computer is ready for use.
End User License Agreement (EULA)
When a new HX2 starts up a EULA is displayed on the touchscreen. It remains on the screen until the Accept or Decline button
is tapped with a stylus.
Tap the Accept button to accept the EULA terms and the HX2 continues the startup process. The EULA is not presented to the
user again.
Tap the Decline button to decline the EULA and the HX2 will reboot. It will continue to reboot until the Accept button is tapped
with the stylus.
Note: The EULA will be presented after any operating system upgrade or re-installation, including language-
specific operating systems.
2-1

Assemble the Armband
1. Armband style 1
2. Armband style 2
Press the Removable Mesh Arm Cover to the underside of the armband.
Slide the arm straps through the arm strap brackets.
2-2

Connect the Ring and Battery Cables
The battery cable and the ring scanner/imager cable should not be exchanged or replaced in a dirty, harsh or hazardous
environment. When the tethers are disconnected, any dust or moisture that adheres to the tether connector can potentially
cause damage upon cable re-connection.
Battery
Note: The HX2 cannot function unless a battery is securely tethered. Be sure to place the HX2 in Suspend
mode before disconnecting a battery, or all unsaved data may be lost.
1. Connect
2. Right Arm
3. Left Arm
4. Press Down
5. Remove
When you want to switch connectors from left to right, or vice versa, first gently press downward on the Retaining Clip, then
pinch and pull the cable connector (not the cable!) straight up and away from the HX2. Do not use a metal object, or extreme
force, to remove the cable connector from the HX2.
Re-connect cables and reassemble the HX2 body-worn components.
2-3

Ring Scanner/Imager
1. Connect
2. Ring on Left Hand
3. Ring on Right Hand
4. Press Down
5. Remove
When you want to switch connectors from left to right, or vice versa, first gently press downward on the Retaining Clip, then
pinch and pull the cable connector (not the cable!) straight up and away from the HX2. Do not use a metal object, or extreme
force, to remove the cable connector from the HX2.
Re-connect cables and reassemble the HX2 body-worn components.
Attach HX2, Ring and Battery to Armband
1. Connect ring and battery cables
2. Mount assembly on arm and ring on finger
3. Plug battery into cable attached to HX2
4. Final assembly
2-4