Supoin SK 9026 User manual

Addr：Floor 36th,BlockA,World Trade Plaza,No.9Fuhong Road,FutianDistrict,Shenzhen.China.
Tel：[phone] 25828560 Fax：[phone]
Customer Service Hotline：[phone]
www.supoin.com
SUPOIN Information Technology（Shenzhen）Co., Ltd.
Version: GWB February 24, 2013
9026 Mobile Intelligent Terminal
User Guide
SK

Page 01
Thank you for using Supoin mobile terminal!
Mobile terminal, a handy palmtop of compounding type, is operated by Windows CE
system. It has integrated barcode reading device, color touch screen, keyboard and
endless communication functions into a whole. The terminal has provided standard
use-interface of Windows, and this brochure will enable you to know better about how
to use the terminal.
This operating brochure mainly introduces user instruction of mobile terminal SHT26.
Chapter 1
Brief introduction
TABLE OF CONTENT
CHAPTER 1
BRIEF INTRODUCTION
CHAPTER 2
PHYSICAL PARAMETER SPECIFICATION OF TERMINAL OF THE 2.6 GENERATION
CHAPTER 3
BASIC OPERATING GUIDE
CHAPTER 4
SYSTEM FUNCTION GUIDE
01
02
04
04
06
06
08
08
13
16
..............................................................................
.................................................................................
.........................................................
...................................................................................................
.......................................................
...........................................................
.......................................
....................................................................................................
3.1 VIEW OF SUPOIN MOBILE INTELLIGENT TERMINAL
3.2 STARTUP, STANDBY, RESUME (FROM STANDBY), RESET, SHUTDOWN
3.2.1 Startup
3.2.2 Standby
3.2.3 Resume from standby
3.2.4 Reset
3.2.5 Shutdown
3.3 GUIDE ON FUNCTION KEY AND EXPANSION INTERFACE
3.3.1 Function key
3.3.2 Expansion interface
4.1 APPLICATION COVERED BY WINDOWS CATALOGUE
4.2 WIFI SETTING
4.3 RELEVANT PROCEDURE SETTING OF CONTROL PANEL
06
...................................................................................................
06
....................................................................................
06
.....................................................................................................
06
.................................................................................................
06
.....................................................
06
.............................................................................................
07
......................................................................................

Page 03Page 02
Chapter 2
Physical parameter specification of terminal of the 2.6 generation
1
2
CPU Samsung 2416 400M
3
5One-dimensional code Se955 (Laser)
4
6
FLASH 128M
Memory 128M
Screen 3.2 inches 240*320
Two-dimensional code
Nonsupport
7Scanning head Straight head
8USB transfer USB disk/synchronization
7
9Bluetooth Support
12 Micro SD TF Maximum 4G
13 Notification Horn, indicator, vibrator
15
16 Estimated battery endurance More than 10 hours under normal condition
17 Scanning speed 116 per/second
18 Scanning angle 47°±3°
19 Max scanning width 101.6cm
20 Scanning light source 650nm Laser
Buttery capacity 3200mah
Keyboard 27 keys(25 normal keys, 1 on & off key, 1
resetting key), nonsupport noctilucent
14
11 Camera Nonsupport
10 Mobile communication module WIFI+ Bluetooth
21 Max scanning distance 114.3cm
22
23 Scan times of full battery >20000per time
24
25
Communication interface
RS232/USB2.0 Interface
26
Service environment
-15℃～45℃ 5%～95%RH
28
Impact strength against dropping
2.5m dropping to cement floor
27
Protection grade IEC standard Ip65
External dimension
29 Weight 328g
30 Chinese character input method Chinese hand-writing input;
32 Operating system wince5.0
31 Standard fitting Battery adaptor, lithium batter, sling, handwriting
pen, USB cable
Charging adaptor AC 100~240V 50/60HZ; Output: DC 5V/1.5A
181.5(length) mm * 35(thickness) mm

Page 05Page 04
Chapter 3
Basic Operating Guide
Scanning key
Direction key
Esc key
Power key
OK key
Function key
Special function key “*”“#”
Function key
Reset key
Components inside after removing rear
cover: charge jack and USB interface
Power key
From left to right, The first light:
indicator for terminal initiation;
The third light:
indicator for battery charging;
Scanning head
Top view、Front view、Bottom view
3.1 view of Supoin Mobile Intelligent Terminal
Battery cover
Horn
Side View Two of Supion
Intelligent Terminal Back View Three of Supion
Intelligent Terminal
SCAN

Page 07Page 06
3.2.1 Startup
Long press red “power key” on the top left corner of screen until “Supoin
Information Technology” appears on the screen, and release the button, indicating
that the terminal is open.
3.2.2 Standby
In case that terminal is not in service for a while and power off is not necessary, shortly
press the red “power key” on the top left corner of screen until the whole screen goes
black, and the terminal is in the shallow dormancy of standby status.
3.2.3 Resume from standby
If resuming (from standby) is needed, just shortly press the red “power key” on the
top left corner of screen until screen resumes as before.
3.2.4 Reset
If procedure and circuit are needed to go back to original status of restarting, just press
“small red button” on the right bottom of “direction key” on keyboard to reset.
3.2.5 Shutdown
For shutdown, just long press the red “power key” on the top left corner of screen
until the whole screen goes black.
3.2 Startup, standby, resume (from standby), reset, shutdown left and right directions are available when pressing it.
【C】key: when inputting code and text, C key can be used as backspace key (delete
pre-completion single value of cursor).
【R】key: can be used as return and exit
【F1】、【F2】、【F3】、【F4】: the function keys are of specified functions based on
each interface.
3.3.2 Expansion interface
1) How to use TF card correctly: take TF card out: open rear cover of the terminal and
take out battery, you can see a TF card slot inside it, slightly push the iron cover (which
bottom is made of white rubber) of the slot toward the end of TF card, then the slot is
open and TF card is available to take out. Insert TF card: open the iron cover of TF card
slot, down the chip of TF card, place the card in the slot, and slightly push the cover up
to buckle up.
2) How to charge correctly: connect charger in interface direction with charge
interface correctly, (the round hole on the right bottom of the terminal is the charge
interface), plug it into power supply, meanwhile, indicator (three indicators on the top
right corner of the terminal, among them the rear rightmost one is the power indicator)
goes red color, representing charging; if the indicator shows no color at all, please
check interface and power supply. When battery charge completes, the indicator will
change into green color.
Note: long-time charging after full battery will decrease the life expectancy of
battery.
3) How to scan correctly: when scanning codes, please press Scan key and release
soon (possible when red light turns out) to make red light cover all code.
3.3 Guide on function key and expansion interface
3.3.1 Function key
【OK】key: the enter key
【#】key: to shift input method.
【 】key: the pointing direction based on direction key, and the up, down,

Page 09Page 08
Chapter 4
System Function Guide
4.1 Application covered by Windows catalogue
1) After startup, startup desktop of terminal shall display on the screen, see Picture 1
Picture 1 Startup Desktop
Picture 2 My Terminal
3) Double click document file of Test hard (Picture 4) =>MOTO_Test_Hard (picture 5)
=>Test_hard.exe(Picture 6) under Windows (Picture 3), then appear an operating
interface, where you can see the external power value, version, release time of core and
corresponding settings of the terminal(Picture 7).
2) Double click Windows file under the catalogue of “My terminal” to perform
corresponding system operation.
Picture 7
Recycle bin
My terminal
Recycle bin
My terminal
Picture 3
File（F） Edit（E） View（V） Goto（G）
Internet
Control panel
My terminal
Picture 4
File（F） Edit（E） View（V） Goto（G）
Procedure
Startup
Startup
Favorite
Desktop
Font
Lately
Picture 5
File（F） Edit（E） View（V） Goto（G）
Other
Picture 6
File（F） Edit（E） View（V） Goto（G）
External power supply 3.894
Supoin -26-BWLXXX-00-2013-01-08-10:28
Phone No.
Local IMSI：460026075562265
Test touch screen（*
Bar code setting
Scan head initialization（3
Photos display（7
Keyboard test（9
SIO test（#
Time setting（2
Scan head test（4
SD card test（8
Input method test（0

Page 11Page 10
4) Bar code setting, double click bar code setting (Picture 8), enter password (Picture 9):
887651234 to set. After click in (Picture 10), any able (able: set corresponding code
scanning system) or disable (disable: set disable code system, after being disable,
corresponding bar code is unable to be scanned) can be set. Corresponding code
system can be set based on demands of scanning different codes of code system, for
example, click able setting Code39 and complete the setting, then setting is succeeded.
5) Selection of USB functions, click “Procedure” =>“USBChange”(Picture 12) to
select USB functions, among them three USB functions can be selected based on
users’ requirements. Take operating module of “U disc functions” for example,
users can click the left small circle around this function to complete the option, which is
similar for “synchronous software function” and “USB network function”. However,
before using “synchronous software function”, installation of synchronous software
on computer is needed before operation of synchronous function.
Picture 11 Picture 12
6) Scanning head initiation (Picture 13) and test scanning head (Picture 14), before
scanning, scanning head initiation is necessary. Double click scanning head initiation to
check whether it can scan normally. Click start can conduct automatic scanning or
manual scanning by pressing scan key.
Picture 14 Test Scan
Picture 13 Scanning initiation
Picture 15 Automatic Scan
Picture 8
External power supply 3.894
Supoin -26-BWLXXX-00-2013-01-08-10:28
Phone No.
Local IMSI：460026075562265
Test touch screen（*
Bar code setting
SIO test（#
Time setting（2
Scan head test（4
SD card test（8
Input method test（0
Scan head initialization（3
Photos display（7
Keyboard test（9
Picture 9
External power supply 3.894
Supoin -26-BWLXXX-00-2013-01-08-10:28
Please enter password
Photos display (7
Keyboard test (9
SD card test（8
Input method test（0
Picture 10
Enable Code39
Enable Code93
Enable Code128
Enable EAN8
Enable EA13
Enable CodeBar
Enable UPC-A
Enable UPC-E
Enable ITF25
Disable Code39
Disable Code93
Disable Code128
Disable EAN8
Disable EA13
Disable CodeBar
Disable UPC-A
Disable UPC-E
Disable ITF25
Factory reset
Recycle bin
My terminal
Procedure（P）
Favorites（A）
Documents（D）
Setting（S）
Running（R）
Suspend (U)
Windows explorer
Command prompt
External power supply 3.894
Supoin -26-BWLXXX-00-2013-01-08-10:28
Test touch screen（*
Bar code setting
SIO test（#
Time setting（2
Scan head test（4
SD card test（8
Input method test（0
Scan head initialization（3
Photos display（7
Keyboard test（9
External power supply 3.894
Supoin -26-BWLXXX-00-2013-01-08-10:28
Test touch screen（*
Bar code setting
SIO test（#
Time setting（2
Scan head test（4
SD card test（8
Input method test（0
Scan head initialization（3
Photos display（7
Keyboard test（9
Current bar code
Standard bar code
Correct times
Default times
Test times
Test interval
Scan test
Automatic test
Sto p Sta rt
Set R eset
Recycle bin
My
Supion
Functions of U disc
Functions of synchronous software
USB network functions
Selection of USB functions
sup oi n

Page 13Page 12
Note: If scanning head initiation fails, the case that no light showing in the scanning
head may be caused by the problematic scanning hardware or there is red light but
unable to scan code, for this case you may exit the procedure and restart it, success of
initiation can basically guarantee normal scanning.
8) Time setting (Picture 19), double clicking time setting can change time into
corresponding year and time, after time setting please click (Picture 20) sure.
Picture 19 Picture 20 Time setting
9) Keyboard test (Picture 21), double click keyboard test, and enter any key to check
whether the key value displaying on screen is correct and operation is normal.
Picture 21 Keyboard test
4.2 WIFI setting
1) Wifi on-off setting (Picture 22), click the left bottom of the terminal, procedure==》
WIFILoader, open WIFI and click OK key (Picture 23), see whether WIFI is open at the
red rectangle downward the tastbar of the terminal. To close WIFI, please press X
button. WiFI has already opened (Picture 24).
External power supply 3.894
Supoin -26-BWLXXX-00-2013-01-08-10:28
Test touch screen（*
Bar code setting
SIO test（#
Time setting（2
Scan head test（4
SD card test（8
Input method test（0
Scan head initialization（3
Photos display（7
Keyboard test（9
Year
Tim e
Time setting
Sur e
Keyboard test
Count

Page 15Page 14
Picture 24 Wifi on
2) Wifi-on setting connection, click “set—network and dial connection” (Picture 25)
on left bottom of the terminal, double click medium icon (Picture 26) to set IP. IP setting
can divide into two types, namely, automatically obtain IP address and set static IP
based on requirements (designate a specific IP address) see (Picture 27), click OK key
for sure, double click the small computer (Picture 28) under taskbar and choose
“wireless information”, then connect to desired SSID (net name) to be connected,
double click sure to be connected, see (Picture 29).
Picture 26 IP setting
Picture 28 Network connection
Picture 25 Wifi setting
Picture 27 Designate static or dynamic IP
Picture 22 Wifi on-off setting Picture 23 Wifi on setting
Picture 29 Network has connected
Recycle bin
My terminal
Procedure（P)
Favorites (A)
Documents (D)
Setting (S)
Running (R)
Suspend(U)
Windows explorer
Command prompt
Recycle bin
My
Open WIFI
Recycle bin
My terminal
Recycle bin
My terminal
Suspend(U)
Procedure（P)
Favorites (A)
Documents (D)
Running (R)
Setting (S) Control panel
Internet and Dial-up connection
Task bar and start menu
Connection
Newly-built connection
Connection
IP Address Name of Servicer
Automatically assignable IP address for this computer
Obtain IP address by DHCP
IP Address
Subnet mask
Default gateway
Connection
Connection
IP information IPv6 information Wi-Fi information
Internet agreement（TCP/IP）
Address type: static
IP Address
Subnet mask
Default gateway
Renewable（R） Details（D）
IP information IPv6 information Wi-Fi information
Select network and press "connect" or right click
to see more options. Add a new network; please
double click "add a new network".
preferred
Status: already connect to XB - SERV
Signal strength: very good
Remind me when new network is available

Page 17Page 16
Picture 33 Screen correction
Picture 35 Volume setting
Picture 31 Screen correction
Picture 30 Enter control panel
Picture 32 Screen correction
Picture 34 Screen correction
Picture 36 Volume setting Picture 37 Supion PDA setting
Picture 38 Supion PDA setting
1) Screen correction, volume setting, wifi on-off status by default, automatic dormancy
and dormancy forbidding all can be set by control panel, click (Picture30) to enter
control panel to set correspondingly. 1: screen correction see (Picture 31-picture 33),
click “cross ” until the icon is back to the original center to achieve successful screen
correction, press R key to exit, click OK key for confirmation, 2: double click “volume
key” to conduct corresponding setting, volume increases from left to right, 3: double
click Supion PDA for corresponding setting, such as “Wifi on-off status by default,
automatic dormancy, dormancy forbidden, automatic dormant time (value in seconds ),
after setting the terminal shall sleep automatically at setting time, the screen goes
black, (for awakening, just slightly press power key)” and other relevant
settings(Picture 38), restart the terminal after setting confirmation.
4.3 Relevant procedure setting of control panel
Recycle bin
My terminal
Suspend(U)
Procedure（P)
Favorites (A)
Documents (D)
Running (R)
Setting (S) Control panel
Internet and Dial-up connection
Task bar and start menu
File (F) View (V)
Property of
Bluetooth
Storage manager
Keyboard
PC connection
Pen needle
screen correction
Power supply
Pas swo rd
Control panel
double-click correct
Double-click the grid to set the
double-click speed sensitivity and
physical distance.
Double-click the icon test to set
double click. If the icon is not
changed, please use the above
grid to adjust the Settings.
properties of pen needle
properties of pen needle
double-click correct
properties of pen needle
If terminal is not correctly responsive
to click, please re-correct the screen.
Please click “re correct” to start re-corrected
procedure.
Re correct
Screen correction
Click center point of the cross cursor with pen
needle slightly and accurately. When the target
moves on the screen, repeat the action. Press
the Esc key to cancel.
Click here for
the cross calibration
File（F） View（V）
Internet and
Dial-up connection
System
Show Supion PAD
configuration
Volume and sound Dialing
Certificate Client permission
of the terminal server
Control panel
Internet and
Dial-up connection
System
Show Supion PAD
configuration
Volume and sound Dialing
Certificate Client permission
of the terminal server
Control panel
File（F） View（V）
Automatic dormant time setting
Current event (in second)
Res et
Automatic dormancy setting
Current status: allowable
Wifi status setting by default after startup
Current status: close
Allow
Forbid
Close by default
Open by default
Horn
Buzzer
Motor
Supion
Supion PDA configuration
Volume Voice
Soft（S） Loud（L）Voice increases from left to right
Initial voice at the following time
Event（E）（warm, system event）
Application（A）
Notification（N）（alarm clock, remind）
Key stroke（K）;
Sof t lou d
Sof t lou d
click screen（s）
Volume
Volume and voice property

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.