SUSPENZ 11-0036 User manual

Model # 11-0036
Parts List
Qty Name
2Shelf Brackets
4Phillip Head Screw
36” Shelf Brackets
Customer Service:770-518-0045
Fax: [phone]
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Rev. 12/17 For Technical assistance or Replacement parts: call 866.787.7369
STEP 1
A.
B. Free-Standing Frame Direct
C. Free-Standing Frame
Tools Needed: Tape Measure, Electric Drill, ³/₁₆” Drill Bit, and a #3 Phillips Head Driver
The length of your Watercraft will determine arm spacing. 40% of total boat
length, meaning your 10’ boat x 0.4 = 4’ arm spacing.
1.
2.
4.
5. Go to STEP 2
Pro Tip: An old woodworkers trick is to rub the screw threads on a bar of soap
for easy installation.

Customer Service:770-518-0045
Fax: [phone]
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Suspenz® products are warrantied for life against defects in material or workmanship to the original owner. Product must
be used for its intended purpose under normal conditions. Please visit www.Suspenz.com for complete warranty
information.
OUR PLEDGE TO YOU
For Technical assistance or Replacement parts: call 866.787.7369
Using mounting hardware supplied in frame
box, insert bolts through holes in arms then
into the frame and tighten securely.
Go to STEP 2
Attach Free-Standing bracket using instructions
provided with the bracket. Attach arms to the frame
using the locking pin. The locking pin can be inserted
in either top or bottom hole of bracket for more
exact positioning.
Note: Brackets sold separately: Model #31-5501
(Yellow) or Model # 31-5502 (Black). Brackets are
required for attaching shelves to back side of frame.
Go to STEP 2
Tools Needed: Two ¹/₂” Wrenches Tool Needed: ¹/₂” Wrench
Page 2
Shelf Brackets
Post
Arm
Post
Arm
STEP 2: Padding and Safety Straps - Optional
Model #21-3636 is available to slide over shelf bracket.