Sutcliffe Play WUF004 User manual

BARK PARK
WUF004 Crawl Through
Installation Instructions

WUF004
Crawl Through
Installation Procedure
1 Check using the Parts List that none of the components are missing.
2 Plan the final position of the Crawl Through ensuring there is sufficient space.*
3 Sort and identify parts before assembly. All four posts are identical.
4 Excavate the foundation holes in accordance with the plan on pages 3 and 4.**
5 Position 2 x 300 long spragging irons into the holes provided in each post and stand in the
foundation holes. The ground level is marked on each post at 500mm.
6 Assemble the tunnel and fixings regarding the positions marked on the posts. Do not
tighten the fixing bolts until the tunnel has been assembled.
7 Ensure the posts are completely vertical and pour in the correct amount of concrete. See
plans on pages 3 and 4 for more information.
8 Do not allow the equipment to be used until the concrete has set (2-3 days) and the
required safety surface has been installed.
9 Check that all fixing bolts are tightened.
10 Follow the maintenance instructions supplied.
*During installation care must be taken to prevent hazards to children and animals.
**Care should be taken if conditions are abnormal.
Page 2
Description Qty. Stock
HDPE Tunnel 1 WUF014
Posts (set of 4) 1 WFP004
Fixing Kit 1 WUF004F
Required Tools
Tape measure and digging implements
Spirit level and tools
Parts List

Page 3
WUF004
Crawl Through Elevation and foundation
Concrete
Foundation
400x400x400
Play-level

CHECKED
DRAWN BY
REVISION
TITLE
SCALE
DATE
DESCRIPTION
1113mm
400
400
932mm
WUF004
Crawl Through
Fixings and Foundation Plan
Page 4
1
2
3
1
3
WUF014 TUNNEL
2
DZS009 M10 STEP WASHER
HSS514 M10 x 40 HEX SET SCREW
DZS005 M10 BLACK NUT COVER

WUF004
Crawl Through
Maintenance Instructions
Recommended Regular Inspection and Maintenance Interval Days
7 14 28 56 365
Check stability of structure, tighten connections if required.
Check all uprights at ground level for corrosion and/or rot.
Replace any defective parts.
Check all painted elements for damage, rub down and repaint or
replace as required.
Check chain/ropework assemblies for wear and damage, replace if
required.
Check rotating and pivot points for wear and smooth running
lubricate or replace if required.
Check rubber parts for wear and/or damage, replace if required.
Check grips are secure, adjust if required.
Check panels are in good condition. Reseal edges or replace if
required.
Check slide chutes for smoothness and any foreign elements,
remove any found.
Check rubber safety surfaces for damage and poor performance,
repair or replace if required.
Check loose fill safety surfaces, remove any foreign elements, rake
level and top up if required.
Disposal Instructions
All components should be broken down into categories of:-
1 Mild Steel - all Swing Frames, Playzone, Toddlerzone, Teenzone activities, Deck Frames and Springie Frames.
2 Stainless Steel - all Slides, Mirror Panels.
3 Aluminium - all Playzone and Toddlerzone Posts.
4 Galvanised Steel - all Chains and Teenzone Posts.
5 Moulded Rubber Products without steel inserts - all Toddlerzone Caps and edge details.
6 Timber - all natural timber, plywood, and MDF panels.
Wherever possible these materials should be taken to specialist recycling organisations and recycled.
In some cases where composite materials are used, then disposal at land fill sites is the only alternative such as:
7 Moulded Rubber Products encasing steel inserts - all Swing Seats, Deck Tops, Duo/Dizzy Disc Tops.
8 High Pressure Laminate - all Toddlerzone, Playzone and Teenzone Panels.
9 Steel Core Polypropylene Rope - all Scramble Nets, Space Nets, Playzone/Toddlerzone Ropes.
Page 5