Suzohapp peerless-AV 49-5672-30 Guide

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
1 of 9
Part Number 49-5672-30
Installation and Assembly:
LCD UPRIGHT STAND FOR PEDESTAL CABINETS
FEATURES
• Take all of the guess work out of selecting the proper stand
for your pedestal cabinets. This custom stand is specically
designed for use with Incredible Technologies pedestal cabinets
• Adjustable mounting brackets attach to the front sides of both
cabinets by using existing bolts already on cabinets
• Extra long 6 foot pole provides an extremely wide range of
height settings to be certain the LCD monitor is the right
height to appeal to the players
• Since the stand installs to the pedestal cabinet it maintains the
24" required distance from control panel to LCD
• Internal cable management and base cover provides for a safe
clutter-free appearance
• Unique back plate allows two sign brackets (included in the
Incredible Technologies Showpiece cabinet) to mount to back
of LCD stand
• Supports the full range of VESA mounting standards
• Supports LCD sizes of 32" to 52"
• Max Load 100 lb. screen
• Black color blends well into any location
• Zero degree tilt
• 5-Year warranty
• Ships UPS (47.1 lbs)
• Dimensions 22" to 34"W (Adjustable) x 73.25"H x 30"D

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
2 of 9
Description Qty. Part #
Abase connection plate 1 125-1018
Bbase cover 1 125-1019
Cbase right side 1 125-1021
Dbase left side 1 125-1022
Eside bracket for Incredible Technologies pedestal Cabinet 2 125-1023
Fupright tube 1 580-1159
Gadapter box 1 125-1025
Hadjustment signage bracket 2 124-1995
I5/16-18 X 1/2 socket set screw 2 500-1081
JM6 x10 socket pin serrated washer head screw 4 510-1066
K1/4" x .062 flat washer 4 540-9440
LM6 x 8 mm socket pin screw 4 520-1255
MM5 x 10 mm socket pin serrated washer head screw 18 510-1126
NM6 x 12 mm socket pin serrated washer head screw 4 510-1050
O5/16-24 X 1.25 button screw 2 520-1140
P3/16" x 1" x 4" allen wrench 1 560-0071
Q4 mm allen wrench 1 560-9646
Radapted bracket 2 201-1510
Suniversal screen bracket 1 201-1945
T.344 ID x .75 OD x .5 HT spacer 4 540-1059
UM6 x 20 mm socket pin serrated washer head screw 4 510-9554
Vpolyester mesh sleeve (not shown) 1 600-101
5
Parts List
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
AB
CD
E
F
G
H
J
I
L M
O P
K N
Q
TUR S

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
3 of 9
Feed LCD TV/Monitor cables through top cord management hole of upright tube (F) as shown in g. 1.1. and
through bottom cord management of upright tube (F) as shown in g. 1.2.
F
LCD TV/ MONITOR CABLES
g. 1.1
g. 1.2
1
Adapter Bracket Fasteners
M4 x 12mm (6)
(504-9013)
M6 x 25mm (4)
(520-1208)
M4 x 25mm (4)
(504-1015)
M5 x 25mm (4)
(520-9543)
M6 x 12mm (4)
(520-1128)
M5 x 12mm (4)
(520-1027)
.5" spacer (4)
(540-1057)
.75" spacer (4)
(540-1059)
M8 x 16mm (6)
(520-9257)
M8 x 40mm (4)
(520-1136)
multi-washer (6)
(580-1036)
M8 x 25mm (4)
(520-1031)
M6 x 20mm (4)
(520-9402) M6 x 30mm (4)
(510-9109)

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
4 of 9
Secure base cover (B) to base right side (C) and
base left side (D) using six M5 x 10 mm socket pin
serrated washer head screws (M).
Secure upright tube (F) to base (A) using two
5/16-24 x 1.25 button screws (O) with wrench (P).
Secure Upright Stand to Pedestal Cabinet using six
existing Pedestal Cabinet screws. Use polyester
mesh sleeve (V) to help with cord management
NOTE: Route cords before attaching upright tube
(F).
Secure base right side (C) to base left side (D) using four M5 x 10 mm socket pin serrated washer head screws (M)
and base connection plate (A).
Secure side bracket for Incredible Technologies pedestal Cabinet (E) to base right side (C), and base left side (D)
using eight M5 x 10 mm socket pin serrated washer head screws (M) as shown in g 2.1.
E
C
D
A
M
E
M
g. 2.1
USE THREE EXISTING
CABINET SCREWS
O
B
M
LCD TV/ MONITOR CABLES
FD
C
V
2
3 4

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
5 of 9
SIGNAGE BRACKETS INCLUDED
WITH INCREDIBLE TECHNOLOGIES
PEDESTAL CABINETS
Secure two adjustment brackets (H) to signage
brackets (included with Incredible Technologies
Pedestal Cabinets) using four M6 x 10 socket
pin serrated washer head screws (J) as shown in
g.5.1.
Secure adjustment brackets (H) to adapter box (G)
using four M5 x 8 mm phillips pan screws (L) as
shown in g. 5.2
Secure adapter box (G) to upright tube (F) using two
5/16-18 x 1/2" socket set screws (I). Tighten using
4 mm allen wrench (Q).
g. 5.1 g. 5.2
H
F
G
G
JF
L
H
VESA®200 X 100 VESA®200 X 200
Choose mounting hole pattern shown in detail
1. When mounting screen with VESA mounting
patterns, hand thread four M6 x 12 mm socket pin
serrated washer head screws (N) without spacers
leaving a 1/8" gap.
If there is a bump out on back of screen hand thread
four M6 x 20 mm socket pin serrated washer head
screws (U) through spacers (T) into screen leaving
a 1/8" gap in between the spacer and the screw as
shown in gure 7.1. Detail 2.
DETAIL 1
g. 7.1
Detail 2
1/8"
SF650 ATTACHMENT
T
T
U
U or N
5 6
7
MOUNTING PATTERNS

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
6 of 9
9For screens using hole patterns other than Vesa®200 x 100 and 200 x 200: Use universal screen bracket
included in the kit.
Secure universal screen bracket (S) to adapter box (G) using four M6 x 12 socket pin serrated washer head screws
(J) through 1/4" x .062 at washers (N) using mounting patterns shown in g. 9.1.
G
J
N
g. 9.1
g. 9.2
Universal Screen Bracket Installation
For screen compatibility please refer to the LCD or plasma interface list on our website www.peerlessmounts.com or
call customer care for a screen specic adapter brackets.
• Be sure to center universal screen bracket to
adapter box.
• Screen must not exceed 1" offset to center of
universal screen bracket.
CAUTION
G
Hook exposed screws on back of screen into
keyhole slots on adapter box (G). Tighten all four
screws.
S
8
• If screws don't get three complete turns in the screen
inserts or if screws bottom out and bracket is still
not tightly secured, damage may occur to screen or
product may fail.
CAUTION

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
7 of 9
To prevent scratching the screen, set a cloth on a at, level surface that will support the weight of the screen. Place
screen face side down. If screen has knobs on the back, remove them to allow the adapter brackets to be attached.
Place adapter brackets (R) on back of screen, align to holes, and center on back of screen as shown below. Attach
the adapter brackets to the back of the screen using the appropriate combination of screws, multi-washers, and
spacers as shown in gure 10.1 or 10.2.
NOTE: Top and bottom holes on screen must always be used.
Verify that all holes are properly aligned, and then tighten screws using a phillips screwdriver.
10
Installing Adapter Brackets
Notes:
• The number of fasteners used will vary,
depending upon the type of screen.
• Multi-washers and spacers may not be used,
depending upon the type of screen.
• Use the corresponding hole in the multi-
washer that matches your screw size.
• Tighten screws so adapter brackets are rmly attached. Do not tighten with excessive force. Overtightening can
cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become
detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
NOTE: For at back screens proceed to step 10-1. For bump-out or recessed back screen skip to step 10-2.
MEDIUM HOLE FOR M5 SCREWS
SMALL HOLE FOR M4 SCREWS
LARGE HOLE FOR M6 SCREWS
MULTI-WASHER
NOTE: "Z" dimensions should be equal.
R
CENTER BRACKETS
VERTICALLY ON BACK
OF SCREEN
Z
Z

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
8 of 9
SCREEN
MULTI-WASHER
SCREW
ADAPTER
BRACKET (BB or CC)
SPACER
ADAPTER
BRACKET (BB or CC)
SCREEN
MULTI-WASHER
SCREW
Begin with the shortest length screw, hand thread through multi-washer and adapter bracket (R) into screen as
shown below. Screw must make at least three full turns into the mounting hole and t snug into place. Do not
over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the bafed
fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
NOTE: Spacers may not be used, depending upon the type of screen.
Begin with longer length screw, hand thread through multi-washer, adapter bracket (R) and spacer in that order
into screen as shown below. Screw must make at least three full turns into the mounting hole and t snug into
place. Do not over tighten. If screw cannot make three full turns into the screen, select a longer length screw from
the bafed fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
For Flat Back Screen
For Bump-out or Recessed Back Screen
10-2
10-1
If you have any questions, please call Peerless customer care at 1-800-865-2112.
g 10.1
SCREW
MULTI-WASHER
ADAPTER BRACKET (R)
Display
If you have any questions, please call Peerless customer care at 1-800-865-2112.
SCREEN
MULTI-WASHER
SCREW
ADAPTER
BRACKET (BB or CC)
SPACER
ADAPTER
BRACKET (BB or CC)
SCREEN
MULTI-WASHER
SCREW
g 10.2
SCREW
MULTI-WASHER
ADAPTER BRACKET (R)
Display
SPACER

ISSUED: 06-14-12 SHEET #:125-9324-1
Visit the Suzo-Happ Web Site at www.suzohapp.com For customer care call 888-289-4277 or 847-593-6130
9 of 9
Mounting and Removing Flat Panel Screen
Hook adapter brackets (R) onto universal screen
bracket (S). Then slowly swing screen in as shown.
Turn safety/security screws, using security allen
wrench, clockwise at least six times to prevent
screen from being removed as shown in cross
section of g. 11.1. Screen can be adjusted
horizontally if desired as shown in gure 11.2.
NOTE: To lock the screen down, tighten safety/
security screws to universal screen bracket (W) as
shown in cross section.
To remove screen loosen safety/security screws,
swing screen away, and lift screen off of universal
screen bracket (S).
11
• Always use an assistant or mechanical lifting equipment to safely lift and position the at panel screen.
R
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
CAUTION
g 11.1
S
CROSS SECTION
R
SAFETY/
SECURITY
SCREWS
S
g 11.2
WARNING