Using the Menus
When you open the Main Menu, you will see the following
four categories, each containing several options. Here’s a
quick rundown of what you’ll see.
Pairing
This is where you pair cameras with channels in the receiver.
See page 7 for more details.
Record
Auto-Delete:• Whilst Auto-Delete is turned on, and the
SD card is full, the receiver will automatically delete the
oldest event to have space to record a new event. If
Auto-Delete is off and the SD card fills up, the receiver
will no longer record.
Alarm Record Time:• The amount of time after a
motion/alarm event that the receiver will continue to
record for. You can set this time between 3 seconds
and 10 minutes.
Time Stamp:• When Time Stamp is set to on the time
and date of a recording will be overlaid on the video.
We suggest leaving this set to on, as recording the
time and date of an event typically makes the footage
more useful.
Format:• Formats the SD card in the receiver. Formatting
removes all data and re-writes the file allocation table.
Only use this option if the SD card seems incompatible
with the receiver, and/or you really want all data on
the card to be erased.
Playback:• Enter playback mode (see pages 14 - 15).
Schedule
You can set a start and end time for the period that•
you want the receiver to record each day.
Only one recording period can be defined each day.•
For the duration of the programmed schedule, the
receiver will record continuously, regardless of whether
there is movement in the camera’s line of sight.
For more information about Scheduled Recording, see•
page 11.
Setting
Here you can access and set many of the settings in the
receiver. You’ll be able to adjust the date and time, your
display settings, and alarm settings. For more details, see
pages 12 - 13. The Main Menu with the
Settings Menu selected.
The Main Menu with the
Schedule Menu selected.
The Main Menu with the
Record Menu selected.
Layout of the Record Menu
with Auto Delete selected.
The Main Menu with the
Pairing Menu selected.
