
6Adult Stand Up Paddle Board Instruction Manual
Repair Instructions
Care & Storage Instructions
Contact Info
Note: If you nd a chamber is damaged, use the provided repair patch.
1. To nd out the damaged place on the board, wipe the hull with soap and water,the
soap will bubble over the damaged hole.
2. Deate the board completely, clean and dry the damaged area.
3. Cut a piece of suitable size from the repair patch.
4. Apply the vinyl repair glue sparingly to patch, spreading out it evenly all over, then
cover to the damaged area and smooth out any air bubbles.
5. Place a weight on the repaired area, and allow at least 24 hours to reach full bond
strength before inating it.
Note: Vinyl repair glue is not included.
1. After deation completely, use a damp cloth to clean all the surface.
2. Don’t use solvents or other chemicals that may damage the product.
3. Put all the parts in the carry bag after dried completely.
4. Store in a cool & dry place and out of children’s reach.
5. Check the product for damage at the beginning of each season and at regular
intervals when in use.
Should you require any assistance regarding this product please contact us using the
details below:
Address:
Unit 5 – Mill Square,
Featherstone Road,
Wolverton Mill,
Milton Keynes
MK12 5ZD
Email: support@sweatband.com
Website: www.sweatband.com