SWEEX GA101 User manual

English version
4
GA101 Sweex Gamepad Dual Shock USB
• Never expose the Gamepad to extreme temperatures. Do not place the device in direct sun light or close to heating elements.
• Do not use the Gamepad in extremely dusty or moist environments.
• Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics.
• Never try to open the device yourself, this voids the warranty.
Installation
Playstation:
Connect the Gamepad to the Playstation
PC:
Place the Sweex CD-ROM in the computer. The CD-ROM will start automatically and display a menu.
To install the drivers press “Drivers XP and Vista”. Follow the installation procedure and then connect the Gamepad to an USB
port.
Windows will install the drivers for the device.
Testing and configuration
If testing or configuration of the Gamepad is required go to “Start” – “Control Panel” and double click “Game Controllers”.

English version
5
Press “Properties” to test and configure the Sweex Gamepad.
Vibration function (Rumble)
On the Gamepad there is a “Rumble” button to switch the vibration function on and off. This function only works when the drivers
are installed correctly.

English version
6
Vibration test
Turbo function
With the turbo function it is possible to fire repeatedly by holding down the button. To set a button to turbo press the turbo whilst
pressing the button.
To remove the turbo function press “Clear” whilst pressing the button.
The Mode button switches the analog mode on and off. When the upper light is lit the analog mode is on.
Warranty
For all Sweex products a warranty period of 3 years applies. We do not give support or warranty on supplied software,
rechargeable batteries and batteries. Transaction of warranty only takes place at the sales point where the product is bought.
All brand names and associated rights mentioned in this manual are and stay property of the rightful owner.