
Thomann
GmbH
•
Hans-
Thomann-Straße
1
•
96138
Burgebrach
•
www
.thomann.de
•
[email protected] DocID: 509892_04.02.2021 Webcam 3 Full-HD AF-L
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected for recy-
cling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your local waste
disposal facility.
Technical specications
Resolution 1080p Full HD
Frame rate 60fps
Capture angle 96°
Aperture 2.5
Auto focus yes
Audio built-in stereo microphone
Computer connection USB 2.0
Mounting options Multi-functional bracket for standing operation or monitor screen mounting
1/4" thread for tripod mounting
Memory card slot no
Protection class IP44
Dimensions (W × D × H) 50mm×62,5mm×75mm
Weight 210g
Environmental conditions Temperature range 0 °C…40 °C
relative humidity 50 %, non-condensing
Using the product
1. Mount the camera either on a tripod or on the display. You can also just put it on
your desk. The optimal distance between the camera and the subject is approx.
1m.
2. Connect the USB plug of the camera cable to the USB port of a computer with
Windows or MacOS operating system.
3. The required driver is provided by the operating system and installed
automatically. The power indicator then lights up and the camera is ready for
use.
4. Remove the magnetic cover from the lens. The cover can be attached to the back
of the camera for storage. Start the desired chat or video conference software.
When the camera is on, the activity indicator lights up.
5. Briey touch the sensor for the ambient lighting to turn it on. Touch the sensor
again to set the colour temperature of the ambient lighting to 3100 K, 4000 K or
5800K one after the other. Touching it again switches o the ambient lighting.
Touch this sensor longer to continuously adjust the brightness of the ambient
lighting.
6. If you want to interrupt the transmission of the camera image, put the lens cover
back in front of the lens so that it is covered.
Note
If you use the camera on a laptop that has a built-in camera, you
must rst deactivate it or set the external camera as the standard
device for audio / video recording.
EN