SWIT Electronics Co.,LTD. S-4604 User manual

S-4604 3GSDI 1 to 4 Distributor
USER MANUAL
SWIT Electronics Co., Ltd.
Tel:[phone]
Fax:[phone]
http://www.swit.cc
E-mail: contact swit.cc
1. Ch r cteristics
◆ Portable 3G/HD/SD-SDI distributor
◆ 1 SDI input, 4 SDI output
◆ Power/Input/Output status indicators
◆ Heavy duty housing
◆ Bottom screw threads for installing
2. Product View
Left side view Front view Right side view
⑴ SDI OUT: 3G/HD/SD-SDI output (BNC)
⑵ LED st tus indic tor:
Power (Red): Power indicator
Status (Green): Status indictor, lights on when SDI input is recognized
SDI LOCK (Yellow): SDI indicator, lights on when there’s SDI output
⑶ SDI IN: 3G/HD/SD-SDI input (BNC)
⑷ DC 12V: 5.5mm pole DC input

3. Inst ll tion Pl te
Inst ll tion Pl te Re r View of S-4604 Inst lled
Screw hole 3 Screw hole 4
Screw
hole 1
Screw
hole 2
Screw hole 5 Screw hole 6
Match the screw holes 1&2 with the threads 1&2 of S-4604, and fix the installation plate to the S-4604 by the
supplied screws. The screw holes 3, 4, 5, 6 are used to install S-4604 to wall or racks.
4. Specific tions
Input 3G/HD/SD-SDI×1
Output 3G/HD/SD-SDI×4
SMPTE-425M 1080p (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-274M 1080i (60 / 59.94 / 50)
SMPTE-296M 720p (60 / 59.94 / 50)
ITU-R BT.656 576i (50)
Format SDI
SMPTE-125M 480i (59.94)
Power ≤2W
Working Voltage DC 6-18V
Working Environment Temperature: 0°C-+70°C, Humidity:10%-90%
Dimension 105×84.15×29 mm
Net weight 210g
5. M inten nce
1. Please do not disassemble the product by yourself.
2. Keep the product away from rain or moisture.
3. Please use the provided power adapter and if you use third party power adapter, please make sure the
voltage range, supplied power, and polarity of power lead are fit.
M tch thread 1
M tch thread 2