NO:S1CD70BV2
1D Bluetooth Portable
Barcode Scanner
User Guide
Factory Default
Keyboard ON or OFF in IOS device
Note : Scan above Barcode to enable or disable
Keyboard in the IOS device
I
I
II
II
Auto-sense Mode
Enable
Disable
Pair instruction
A:Barcode Scanner pair with USB dongle
Step 1, Scan Below Pairing barcode I, barcode II in
sequence/Long press 8s to enter pairing mode, and the
scanner LED1 indicator become blue and flashing;
Step 2,Connect the USB dongle to host device and
wait a second ,the LED1 indicator both become blue on
barcode scanner and USB dongle after succeed pair.
B:Barcode scanner pair with bluetooth device
Step 1, Scan Below Pairing barcode I, barcode II in
sequence/Long press 8s to enter pairing mode, and the
scanner LED1 indicator become blue and flashing;
Step 2,Open bluetooth in the bluetooth
device and
search for the barcode scanner which
named “R&B40
and click connect ,wait a second ,the
barcode scanner
LED1 indicator becomes blue after succeed
pair.
Bluetooth Pairing instruction
working current 170mA
withstand multiple times 3 meters drops to concrete
5% - 95% RH ( Non-condensing)
Cable Length 0.8m
-20℃-50℃
-40℃-70℃
ABS+PC
Material
≥270 times/sec
Working
Current
Shock
Resistance
Working
Temperature
Storage
Temperature
Relative
Humidity
Resolution
Ratio
Scanning
Depth
Error Rate 1/500 thousand
Interface
DC5V±5%
Working
Voltage
Scanning
Speed
Scanning
Mode
Manual/Continuous/Auto-flashing/Auto-scanning
2500point
HID
20-330mm(0.33mm, PCS90%)
Structure Chart：
LED1: Bluetooth light
LED2: Power light
KEY: Trigger buttons
(Long press 8s to enter pairing mode)
LED1
LED2 KEY
Technical Parameter：
1) Powerful decoding chip to read most standard 1D
barcodes;
2) Memory chip can store max 35000 barcodes(EAN13);
3) Long wireless range up to 100m in open yard;
4) Compatible with Android and IOS devices;
5) Can use as wired barcode scanner through charging
cable.
Product Features:
≥4mil，3mil is ok
Scanning
Principle 2500 point pixel ccd image sensors
Minimum Element
Resolution
Decoding
capability
Light
Sources
Date Item
617 nm LED red
Barcode Scanner
Parameter
CUP-A, UPC-E, EAN-13, EAN-8,
Codabar, Code 39, Code 39 Full
ASCII, China Post, Plessey, MSI,
Code 93, Code 128, Industrial 2 of
5, Interleave 2 of 5, Code 11,
ISBN, ISSN, Code 32(Italian
pharm code),
Code 39 extended, GS1-128 and
ITF-14, SISAS,
GS10mnidirectional, GS1 Limited,
Aviation 25, RSS 14.
Upload all data
Upload new data
Data upload instruction in Inventory Mode
Note：
1) Normal Mode:the data will be uploaded to host
device immediately after scan ,out of range it will
not save the data ,and there will be 2 alarm beeps
out of range;
2) Inventory Mode:the data will be saved in the
memory chip ,and upload data to host device as
instructed;
Eg: scan the “upload all data and clear”, the
scanner will upload all data saved in the memory
chip and cleared the original data.
3) Automatic storage Mode:the data will be
uploaded to host device immediately after scan if
the scanner in range , the data will saved in the
memory chip if the scanner out of range which will
heard 2 alarm beeps, press the scanner trigger to
upload the saved data after back to range,and the
original data in the memory chip will be cleared.
Automatic
storage(default)
Normal
Inventory
3 Optional Wireless Mode
