Symbol Workabout Pro4 User manual

Guide Setup Wireless Network - Pro4
Scanner type Pro4
The Workabout Pro4 model is available in two different brands –Motorola and Symbol (the only difference is the name of the
manufacturer). Workabout Pro4 may be with or without barcode reader. Symbol Workabout Pro4 is shown below.

Setup Wifi Network.
1) Click on the Windows icon in the lower left corner of the screen
2) Click on the Home icon
3) On the screen, click on the line with text WiFi:
”Button” Fusion is now available at the bottom of the screen. Click on Fusion
4) Click on Find WLANS
5) Find the network to be used, and press and hold on the networks icon, until a new menu appears on the screen
6) In the menu, click on ”Create Profile”
Go to 7 on the next page
1
2
3
4
5
6

7) Click 4 times on Next > (until picture 5 of 9 is shown)
8) Mark the circle ”Pass-phrase”and click on Next >
9) Enter the networks password in both the Key and Confirm fields.
When the status text below the Confirm field shows Status Key & Confirm Key Fields Match!, click 3 times on Next > (until picture
9 of 9 is shown)
10)Click on Save
11)Click on OK
Go to 12 on the next page
7
8
9
10
11

12)Click on the Windows icon in the lower left corner of the screen
13)Start the Pack and Sea application by clicking the Pack and Sea icon
Note: In case of problems with the network connection, the scanner must be restarted –press and hold down the buttons FN and
PowerOn/Off in about 5 seconds
12
13