Symetrix SymNet 800HLA4 User manual

1/4
Quick Start Guide
HomerLink BreakOut To download the latest version of SymNet Designer, the Windows application that
controls all SymNet hardware, go to: www.symetrixaudio.com
SymNet TM
Audio Matrix
What Ships in the Box
R A HomerLink BreakOut hardware
device (800HLA4, 800HLA8, 800HLAT,
800HLT4 or 800HLT8).
R One PS-6 (domestic) or PS-6E (export)
power supply which provides 9 volts
DC @ 500 milliamperes (included
with models 800HLAT, 800HLT4 and
800HLT8 only).
R This Quick Start Guide.
R An RJ-45 Incompatibility Warning sheet.
What You Need to Provide
R A SymNet DigIO or other HomerLink
compatible hardware device.
Getting Help
SymNet Designer, the Windows applica-
tion that controls all SymNet hardware,
includes a help module which acts as a
complete user’s guide for both hardware
(including the HomerLink BreakOut) and
software. A printable copy is also avail-
able at www.symetrixaudio.com.
If you have questions beyond the scope
of the help module, contact our Cus-
tomer Support Group in the following
ways:
Tel [phone]
8:00 am to 4:30 pm
Monday through Friday,
Pacific Time
Email [email protected]
Web www.symetrixaudio.com
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This Class B Digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations
Cet appariel numerique de la classe B
respecte toutes les Exigences du Reglement
sur le materiel brouilleur du Canada.
Important Safety
Instructions.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation open-
ings. Install only in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not
fit into your outlet, consult an electri-
cian for replacement of the obsolete
outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer, or
sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus com-
bination to avoid injury from tip-over.
13. Unplug this apparatus during light-
ning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as power-supply cord
or plug cord is damaged, liquid has
been spilled or objects have fallen
into the apparatus, the apparatus has
been exposed to rain or moisture,
does not operate normally, or has
been dropped.
AVIS:
NE PAS OUVRIR
Il ne se trouve a l’interieur aucune piece pourvant entre reparée l’usager.
SEE OWNERS MANUAL. VOIR CAHIER D’INSTRUCTIONS.
S’adresser a un reparateur compétent.
RISQUE DE CHOC ELECTRIQUE
No user serviceable parts inside. Refer servicing to qualified service personnel.
CAUTION
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE
DO NOT OPEN
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user of the pres-
ence of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock to persons. The
exclamation point within an equilateral
triangle is intended to alert the user of
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the product
(i.e. this Quick Start Guide).
CAUTION To prevent electric shock,
do not use the polarized plug supplied
with the unit with any extension cord,
receptacle, or other outlet unless the
prongs can be fully inserted.
Power Source. The HomerLink
BreakOut hardware (models 800HLAT,
800HLT4 and 800HLT8 only) uses a
separate external power supply for
domestic and export markets. Ensure
that your AC mains voltage matches that
of your power supply. Refer to rating on
the power supply. Use only the power
cord and connector specified for the
product and your operating locale.
User Serviceable Parts. There
are no user serviceable parts inside the
HomerLink BreakOut. In case of failure,
customers inside the U.S. should refer
all servicing to the Symetrix factory.
Customers outside the U.S. should
refer all servicing to an authorized
SymNet distributor. Distributor con-
tact information is available online at
www.symetrixaudio.com.
Before You Begin

2/4
Quick Start Guide
HomerLink BreakOut To download the latest version of SymNet Designer, the Windows application that
controls all SymNet hardware, go to: www.symetrixaudio.com
SymNet TM
Audio Matrix
3/4
Quick Start Guide
HomerLink BreakOut To download the latest version of SymNet Designer, the Windows application that
controls all SymNet hardware, go to: www.symetrixaudio.com
SymNet TM
Audio Matrix
Introduction
The Symetrix SymNet Audio Matrix is a Modular, networkable, audio mixing / routing / processing solution for installed sound
systems. Modular and scalable, the SymNet consists of several different hardware modules, which connect to give you a flexible
routing and signal processing solution tailored to your needs. Setup is fast and simple using CAD-style control software, SymNet
Designer, which runs on a PC connected to the SymNet hardware. SymNet hardware modules are digitally interconnected via
SymLink, our low-latency 64-channel digital audio and control bus.
Overview
The HomerLink BreakOut is a 1 rack space SymNet accessory which serves as a breakout point for digital audio channels 5-8
and/or 9-12 on a SymNet DigIO 12x12 DSP. The HomerLink BreakOut connects to a DigIO via HomerLink. HomerLink is a data
bus format designed by Symetrix which allows 4 mono bi-directional AES-3 digital audio channels to be transmitted between
devices up to 100 meters apart over standard CAT-5 cable. The DigIO features two HomerLink ports which provide audio I/O
channels 5-8 and 9-12. These two ports can be connected to one of two types of HomerLink BreakOut modules, the AES4 and
TOS4. The AES4 provides AES-3 inputs and outputs on 2 pairs of XLR connectors. The TOS4 provides S/PDIF optical inputs
and outputs on 2 pairs of TOSLINK connectors. Each HomerLink BreakOut is a half rack module, and any combination can be
fitted side-by-side in a one rack space chassis to provide all remaining DigIO audio I/O channels (5-12) in a single rack space
breakout. (See Rear Panel for configurations and model numbers.)
Mechanical Data
Item Discussion Remarks
Space Required 1U (WDH: 48.3 cm x 15.7 cm x 4.37 cm / 19
in x 6.18 in x 1.72 in). Depth does not include
connector allowance.
Allow at least 1 inch additional clearance for rear panel
connections. Additional depth may be required depending
upon your specific wiring and connections.
Electrical 9 volts DC @ 500 milliamperes
(models 800HLAT, 800HLT4 and 800HLT8 only).
Use only Symetrix model PS-6 (domestic) or PS-6E (export)
power supply.
Ventilation Maximum recommended ambient operating
temperature is 30 C / 86 F.
Weight 1.99 kg / 4.38 lbs.
System Connection
Each HomerLink BreakOut module connects to 1 of 2 HomerLink ports on a DigIO system by way of their respective HomerLink
connectors. Standard CAT-5 cables are used and length must be limited to 100 meters each.
Power is only required for the TOS4 module. A power supply is included. Note that the 800HLT8 model will have two power
jacks, one for each TOS4 module. The included power supply may be connected to either of the TOS4 modules, as power
is shared between the two modules internally. DO NOT connect power to both TOS4 modules simultaneously. No power is
required for the AES4 module.
Warning! The HomerLink RJ-45 connectors should ONLY be connected to other like HomerLink RJ-45 connectors.
NEVER connect HomerLink connectors to any other RJ-45 connectors.
HomerLink BreakOut
SymNet
Audio Matrix
Introduction, Overview, Mechanical Data, System Connection

2/4
Quick Start Guide
HomerLink BreakOut To download the latest version of SymNet Designer, the Windows application that
controls all SymNet hardware, go to: www.symetrixaudio.com
SymNet TM
Audio Matrix
3/4
Quick Start Guide
HomerLink BreakOut To download the latest version of SymNet Designer, the Windows application that
controls all SymNet hardware, go to: www.symetrixaudio.com
SymNet TM
Audio Matrix
Rear Panel
800HLA4 - 4 channel AES-3 BreakOut
800HLA8 - 8 channel AES-3 BreakOut
800HLAT - 4 channel AES-3 and 4 channel S/PDIF Optical BreakOut
800HLT8 - 8 channel S/PDIF Optical BreakOut
800HLT4 - 4 channel S/PDIF Optical BreakOut
Item Description What It Does
HOMERLINK RJ-45 Transmits 4 AES-3 mono channels and receives 4 AES-3 mono channels over
standard CAT-5. Connects to a SymNet DigIO 12x12 DSP.
IN/OUT 1-4 AES-3 4 x XLR Digital inputs and outputs 1-4 in AES-3 format on XLR connectors.
(AES4 module)
IN/OUT 1-4 S/PDIF 4 x TOSLINK Digital inputs and outputs 3-4 in S/PDIF optical format on TOSLINK connectors.
(TOS4 module)
POWER INPUT Threaded DC Power Jack Use only Symetrix model PS-6 (domestic) or PS-6E (export) power supply.
(TOS4 module) On model 800HLT8, the supply may be connected to either of the TOS4 modules,
as power is shared internally. DO NOT connect power to both TOS4 modules
simultaneously.
Rear Panel
www.symetrixaudio.com
MANUFACTURED BY SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
FABRIQUÉ AUX E.-U. PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
SymNet
Audio Matrix
HomerLink Digital BreakOut
OUTPUT 3-4
AES-3
OUTPUT 1-2
AES-3
INPUT 3-4
AES-3
INPUT 1-2
AES-3
AES4
HOMERLINK
www.symetrixaudio.com
MANUFACTURED BY SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
FABRIQUÉ AUX E.-U. PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
SymNet
Audio Matrix
HomerLink Digital BreakOut
OUTPUT 3-4
AES-3
OUTPUT 1-2
AES-3
INPUT 3-4
AES-3
INPUT 1-2
AES-3
AES4
HOMERLINK
OUTPUT 3-4
AES-3
OUTPUT 1-2
AES-3
INPUT 3-4
AES-3
INPUT 1-2
AES-3
AES4
HOMERLINK
www.symetrixaudio.com
MANUFACTURED BY SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
FABRIQUÉ AUX E.-U. PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
SymNet
Audio Matrix
HomerLink Digital BreakOut
POWER INPUTHOMERLINK OUTPUT 3-4
S/PDIF
OUTPUT 1-2
S/PDIF
INPUT 3-4
S/PDIF
INPUT 1-2
S/PDIF
TOS4
+9VDC�
0.2A
+
OUTPUT 3-4
AES-3
OUTPUT 1-2
AES-3
INPUT 3-4
AES-3
INPUT 1-2
AES-3
AES4
HOMERLINK
www.symetrixaudio.com
MANUFACTURED BY SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
FABRIQUÉ AUX E.-U. PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
SymNet
Audio Matrix
HomerLink Digital BreakOut
POWER INPUTHOMERLINK OUTPUT 3-4
S/PDIF
OUTPUT 1-2
S/PDIF
INPUT 3-4
S/PDIF
INPUT 1-2
S/PDIF
TOS4
+9VDC�
0.2A
+
www.symetrixaudio.com
MANUFACTURED BY SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
FABRIQUÉ AUX E.-U. PAR SYMETRIX, INC. MOUNTLAKE TERRACE, WA USA
PAS DES ELEMENTS SERVIABLE PAR UTILISATEUR
SymNet
Audio Matrix
HomerLink Digital BreakOut
POWER INPUTHOMERLINK OUTPUT 3-4
S/PDIF
OUTPUT 1-2
S/PDIF
INPUT 3-4
S/PDIF
INPUT 1-2
S/PDIF
TOS4
+9VDC�
0.2A
+
POWER INPUTHOMERLINK OUTPUT 3-4
S/PDIF
OUTPUT 1-2
S/PDIF
INPUT 3-4
S/PDIF
INPUT 1-2
S/PDIF
TOS4
+9VDC�
0.2A
+

4/4
Quick Start Guide
HomerLink BreakOut To download the latest version of SymNet Designer, the Windows application that
controls all SymNet hardware, go to: www.symetrixaudio.com
SymNet TM
Audio Matrix
Warranty and Service
The Symetrix Limited Warranty
Symetrix, Inc. expressly warrants that the product will be
free from defects in material and workmanship for eighteen
(18) months from the date the product is shipped from the
factory. Symetrix's obligations under this warranty will be
limited to repairing or replacing, at Symetrix's option, the part
or parts of the product which prove defective in material or
workmanship within eighteen (18) months from the date the
product is shipped from the factory, provided that the Buyer
gives Symetrix prompt notice of any defect or failure and
satisfactory proof thereof. Products may be returned by Buyer
only after a Return Authorization number (RA) has been
obtained from Symetrix. Buyer will prepay all freight charges to
return the product to the Symetrix factory. Symetrix reserves
the right to inspect any products which may be the subject of
any warranty claim before repair or replacement is carried out.
Symetrix may, at its option, require proof of the original date of
purchase (dated copy of original retail dealer's invoice). Final
determination of warranty coverage lies solely with Symetrix.
Products repaired under warranty will be returned freight
prepaid via United Parcel Service by Symetrix, to any location
within the Continental United States. Outside the Continental
United States, products will be returned freight collect.
The foregoing warranties are in lieu of all other
warranties, whether oral, written, express, implied or
statutory. Symetrix, Inc. expressly disclaims any IMPLIED
warranties, including fitness for a particular purpose
or merchantability. Symetrix's warranty obligation and
buyer's remedies hereunder are SOLELY and exclusively
as stated herein.
This Symetrix SymNet product is designed and manufactured
for use in professional and studio audio systems and is
not intended for other usage. With respect to products
purchased by consumers for personal, family, or household
use, Symetrix expressly disclaims all implied warranties,
including but not limited to warranties of merchantability
and fitness for a particular purpose.
This limited warranty, with all terms, conditions and
disclaimers set forth herein, shall extend to the original
purchaser and anyone who purchases the product within the
specified warranty period.
Symetrix does not authorize any third party, including any
dealer or sales representative, to assume any liability or make
any additional warranties or representation regarding this
product information on behalf of Symetrix.
This limited warranty gives the buyer certain rights. You may
have additional rights provided by applicable law.
Note: Some Symetrix SymNet products contain embedded
software and may also be accompanied by control software
intended to be run on a personal computer. Said software is
specifically excluded from this warranty.
Limitation of Liability
The total liability of Symetrix on any claim, whether in contract,
tort (including negligence) or otherwise arising out of, connected
with, or resulting from the manufacture, sale, delivery, resale,
repair, replacement or use of any product will not exceed
the price allocatable to the product or any part thereof which
gives rise to the claim. In no event will Symetrix be liable for
any incidental or consequential damages including but not
limited to damage for loss of revenue, cost of capital, claims
of customers for service interruptions or failure to supply, and
costs and expenses incurred in connection with labor, overhead,
transportation, installation or removal of products, substitute
facilities or supply houses.
Servicing the HomerLink BreakOut
If you have determined that your HomerLink BreakOut requires
repair services and you live outside of the United States please
contact your local SymNet dealer or distributor for instructions on
how to obtain service. If you reside in the U.S. then proceed as
follows.
Return authorization
At the Symetrix factory, Symetrix will perform in-warranty or
out-of-warranty service on any product it has manufactured for a
period of three (3) years from date of discontinued manufacture.
Before sending anything to Symetrix, please contact our
Customer Service Department for a return authorization (RA)
number. The telephone number is [phone]. Additionally
support is available via E-mail through [e-mail]
or via the web site
http://www.symetrixaudio.com.
In-warranty repairs
To get your HomerLink BreakOut repaired under the terms of the
warranty:
1. Call us for an RA number (have the serial number, shipping
and contact information and description of the problem ready).
2. Pack the unit in its original packaging materials.
3. Include your name, address, daytime telephone number, and
a brief statement of the problem.
4. Write the RA number on the outside of the box.
5. Ship the unit to Symetrix, freight prepaid. We do not accept
freight collect shipments.
Just do these five things, and repairs made in-warranty will cost
you only one way freight charges. We'll pay the return freight.
If you don't have the factory packaging materials, we recommend
using an oversize box. Wrap the unit in a plastic bag, surround
it with bubble-wrap, and place it in the box surrounded by
Styrofoam peanuts. Be sure there is enough clearance in the box
to protect the rack ears. We won't return the unit in anything but
Symetrix packaging for which we will have to charge you. If the
problem is due to operator misuse or error, you will have to pay
for both parts and labor. In any event, if there are charges for the
repair, you will pay for the return freight. All charges will be COD
unless you have made other arrangements (prepaid, Visa or
Mastercard).
Out-of-warranty repairs
If the warranty period has passed, you'll be billed for all
necessary parts, labor, packaging materials, and freight charges.
Please remember, you must call for an RA number before
sending the unit to Symetrix.
© 2003, Symetrix, Inc. All rights reserved. Printed in the United States of America. Symetrix Part Number 53HLBO-1A00. The information in this Quick
Start Guide is subject to change without notice. Symetrix, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor is
it liable for incidental or consequential damages resulting from the furnishing, performance, or use of this material. Mention of third-party products is
for informational purposes only and constitutes neither an endorsement nor a recommendation. Symetrix assumes no responsibility with regard to the
performance or use of these products. Under copyright laws, no part of this Quick Start Guide may be reproduced or transmitted in any form or by any
means, electronic or mechanical, without permission in writing from Symetrix, Inc. If, however, your only means of access is electronic, permission
to print one copy is hereby granted. Product names mentioned herein may be trademarks and/or registered trademarks of their respective owners.