Symmons Evolution EVOUM1KIT User manual

Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2022 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3698 REV 0 ■ 122822
EVOUM1KIT, EVOUM2KIT
Evolutions Utility Meter Clamp-on Meter & Sensor Module
Installation Guide
Evolution
Model Numbers Feature Highlights
☐EVOUM1KIT Single Utility Meter - (1) Flow Meter-
ing Sensor cable included
☐EVOUM2KIT Compound Utility Meter - (2) Flow
metering Sensors cables included
• Flow Sensor Module
• 24V DC Power Supply 60"
• 2 Meter length Flow metering Sensor - (2) cables
included with EVOUM2KIT)
Location:
Compliance
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.
Warranty
Symmons Evolution EVOUM1KIT Includes flow sensor module, 24 V DC power supply, 2 Meter Remote Magnetic Field
Sensor. 10 Year Commercial Warranty. FCC rules compliant.
Symmons Evolution EVOUM2KIT Includes flow sensor module, 24 V DC power supply, (QTY 2) 2-Meter Remote Mag-
netic Field Sensor. 10 Year Commercial Warranty. FCC rules compliant.
Architectural/ Engineering Specification
Repair Parts
EVOUM1KIT EVOUM2KIT
• IC: 24889-WW08189
• FCC ID: 2ASQP-WW08189
This device complies with part 15 of the FCC Rules.
☐EVOAPWR24 Replacement Power Supply
24VDC
☐EVOUMS-2M Replacement Flow Metering
Sensor, 2 Meter
☐EVOUMS-7M Optional Flow Metering
Sensor, 7 Meter
EVOUNS-7M not included in KIT - Please order on
separate line if needed.

Evolution
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2022 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3698 REV 0 ■ 122822
EVOUM1KIT, EVOUM2KIT
Dimensions
A
C
D
E
RJ45 TO MOLEX
12 PIN
B
1-11/16”
60”
Power Supply
24C DC
Power Jack
2 Meters 1-7/8”
11/16”
Flow Metering Sensor
Evolution Sensor
Module
Measurement
A1-7/16"
B1-5/8"
C5"
D3-7/8"
E6-1/2"
X 4
X 12
Mounting Hardware

Evolution
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2022 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3698 REV 0 ■ 122822
EVOUM1KIT, EVOUM2KIT
A. Locate Gateway, Power
Adapter, (1x) Thin Antenna,
(2x) Wide Antennas
B. Connect Antennas and Pow-
er Adapter to the back of
the Gateway
Install Gateway
1. Location
1. Connect Gateway Hardware
Mechanical Room Admin. Oce Front Desk
Find a central location for the Gateway. Location should be a secure area not enclosed
in metal. Recommended locations include:
Note: After plugging the Gateway power adapter into an outlet, it could take a few minutes to boot up.

Evolution
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2022 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3698 REV 0 ■ 122822
EVOUM1KIT, EVOUM2KIT
Customer App Setup
1. Create and Configure Customer Property
2. Create Customer account & send Email Invitation
3. Customer Logs into water.symmons.com
4. Download the Evolution App for iOS or Android and Sign-In
5. Scan Gateway QR Code and Complete In-app Steps
Scan the Provided QR Code with your
Smartphone or camera to download the
evolution App.

Evolution
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2022 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3698 REV 0 ■ 122822
EVOUM1KIT, EVOUM2KIT
Single Water Meter
Compound Water Meter
A
A
B
D
D
B
C
C
E
E
Single Utility Meter Installation
1. Sensor and Module Installation
A. Plug in Flow Metering Sensor Cable to one of the two Male RJ45 on the Evolu-
tion Sensor Module
B. Place the sensor cable chip flat side facing the water meter
C. Secure sensor cable chip on water meter with Provided zip ties
D. Secure Evolution Sensor Module in desired location using provided mounting
hardware. (Screws, Anchors or Zip-ties)
EConnect the Power Supply Jack into the Evolution Sensor Module then plug
the provided Power Supply into a 110VAC Outlet

Evolution
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2022 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3698 REV 0 ■ 122822
EVOUM1KIT, EVOUM2KIT
Single Water Meter
Compound Water Meter
A
A
B
D
D
B
C
C
E
E
1. Sensor and Module Installation
A. Plug in both flow meter cable to the Male RJ45 on sensor module
B. Place the sensor cable chip flat side facing the water meter repeat for sec-
ond water meter. The two Sensors must be placed on the farthest point on
the water meter from one another
C. Secure both sensor cable chip on water meter with Provided zip ties
D. Secure sensor Module in desired location using provide mounting. (Screws &
Anchors or Zip-ties)
E. Connect the power supply Jack into the Evolution Sensor Module then plug
the provided power supply into a 110VAC Outlet
Compound Utility Meter Installation

Evolution
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2022 Symmons Industries, Inc. ■symmons.com ■[e-mail] ■ZV-3698 REV 0 ■ 122822
EVOUM1KIT, EVOUM2KIT
Single Utility Meter Installation
2. Sensor Module App Setup
3. Meter Reading
A. Scan Sensor Module QR Code
B. Complete App Steps
A. Take Meter Reading from a Photo
B. Read digits / dial. Estimate last
digit between "hash" marks
C. Check Meter units (ex. Cubic
Feet or Gal)
D. Avoid register voids and rollovers
B
A
C