Synapse SNAP Connect E10 User manual

the back of the SNAP Connect E10. Connect the other
end of the cable to an Internet accessible network
Attach the Ethernet cable to the port located on
the orange LED is flashing (indicating Ethernet traffic).
Note: The Ethernet connection must have access
to the Internet and have DHCP IP address
assignment enabled. See the SNAP Connect E10
a) Assemble the 4 nylon standoffs
b) Insert the 9V battery into holder
c) Turn on the LED board using the
using the screws provided.
are aligned correctly).
on the back of each LED board
(make sure the + and - terminals
switch located on the top "Side."
The status LED (Status 1) should
start blinking.
Verify the green LED on the Ethernet port is lit and that
(LAN, cable modem, etc.). Wait 30 seconds.
manual to assign a static IP address if the DHCP
services are not available.
on the front of the SNAP Connect E10.
a) Attach the antenna to the screw down connector
either the wall plug or a USB port on a PC.
b) Apply power to the SNAP Connect E10 using
USB port).
of the device (not the larger, standard
USB connector located on the back
Note: Power is provided by the micro-

a) Launch an Internet web-browser and open
These can be found on the label located
on the bottom of the SNAP Connect E10.
a) Once logged in, you will see a list of available devices.
light readings, temperature and LED intensity.
Click on each device to see a graph of the temperature,
ambient light readings and LED intensity levels for
that particular device.
LEDs on or off and control intensity.
the color scheme and instantly update the web-site.
https://www.snaplighting.com/
b) The initial login screen will ask for a user ID
and password.
This dialog box also allowsyou to turn individual
This list will be updated with changes to the ambient
b) Press either push button on the LED boards to change
A detailed Users manual for the SNAPlighting.com Kit and SNAP Connect E10 are
available online at: Forums.Synapse-Wireless.com
Sign-up is free and gives access to all sections of the Forum, including Latest Releases.