Syscom Video EPMON24A User manual

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety InstructionsWarning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7 8 9
3２ 4 5
6
On Screen Display(OSD) On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety InstructionsWarning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7 8 9
3
２
4 5
6
On Screen Display(OSD) On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety Instructions
Warning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7 8 9
3
２ 4 5
6
On Screen Display(OSD) On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety Instructions
Warning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7 8 9
3２
4
5
6
On Screen Display(OSD) On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety InstructionsWarning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7 8 9
3２ 4
5
6
On Screen Display(OSD) On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety InstructionsWarning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7 8 9
3２ 4 5
6
On Screen Display(OSD) On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety InstructionsWarning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust
Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7
89
3２ 4 5
6
On Screen Display(OSD)
On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety InstructionsWarning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust
Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7
8
9
3２ 4 5
6
On Screen Display(OSD)
On Screen Display(OSD)
Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
9
Specifications
Remark
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0to 40
Humidity Operation：10% to 85%
Color temperature Adjust
This selection will automatically adjust your color setting to the best viewing.
Tools
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
7
On Screen Display(OSD)
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
9
Specifications
Remark
Specification
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0to 40
Humidity Operation：10% to 85%
Panel Panel Type LED- Backlit TFT LCD
Panel Size 24 - inch
Resolution 1920x1080
Pixel Pitch 0.2715x0.2715mm
Brightness 250 cd/m2 (Typical)
Display Color 16.7 M
Contrast Ratio 1000:1 (Typical)
Panel Lifespan 40,000 Hours
Response Time 8 ms (GTG)
Input Analog 15 - Pin D-Sub (VGA)
HDMI Support
DVI Support
Audio Audio In 3.5 ø mm audio jack
Speaker 2W x 2
Power Power Supply Internal
Voltage & Frequency 110-240 V, 50 - 60 Hz
Power consumption Max. 30 Watt, 0.3A (ON mode)
Max. 0.24 Watt, 2.5 mA (Standby mode)
Dimension Monitor (LxWxH) 574x190x403 mm
VESA VESA FPMPMI Yes (100 x 100 mm)
Specification

Standard Resolution
H-Frequency（KHz）V-Frequency（Hz）
and soft
Equipment subassembly
Please check your monitor equipment subassembly including the followings:
AC 100 - 240V ~ 50 / 60 Hz (Please consult the back label of your monitor. )
Basic instruction
Important Safety InstructionsWarning/Caution
Input voltage
Power indicator light
Connection
Color adjustment
Color Adjust Color temperature Adjust
Image Adjust
This selection will automatically adjust your color setting to the best viewing.
Image Adjust
Color Temp
Tools
Tools
Language
Misc
OSD Timer
Translucence
This selection will adjust OSD menu display time
on the screen.
This selection will adjust OSD menu transparency on the screen.
6.2 Auto color
This selection will automatically adjust your image
Press MENU to shows the main choice menus, press MENU into DCR choice item, press up or
down to select ON or OFF, press MENU to open or close DCR function.
setting to the best viewing.
6.1 Auto configration
6.3 Factory reset
This selection will reset the monitor to factory stat
-ement.
Show OSD menu/select function Show OSD menu/select function
Move icon up/increase value
Move icon up/increase valueMove icon down/decrease value
Move icon down/decrease value
Change ratio (wide or normal)
Display or change input signal
Back to last menu/Auto adjust Back to last menu/Auto adjust
Turn ON / OFF monitor
Turn ON / OFF monitor
Function
Key Function Key
Keys Function
7 8 9
3２ 4 5
6
On Screen Display(OSD) On Screen Display(OSD) Specifications
Equipment subassembly
Basic instruction
The best resolution
Input voltage
Connection
Keys Function
Menu options 7
Main menu 7
Explanation of individual options 7
Compatible Resolutions 9
Specifications 9
3
4
5
6
7
9
3
3
3
5
5
5
5
DCR function
To press Menu into main choice menu, press Menu into sharpness adjustment, and then press Up or Down
to select the value, and then press Menu to change sharpness of image.
2.5 Sharpness function
2.4
1.1
1.2
1.3
2.3
Monitor Base
Power Cord VGA Cable
User Manual
Connecting cables
Main Menu:
Audio Cord(optional) DVI cable(optional)
5 Keys Model 7 Keys Model
Green light Normal work statement
No signal inputGreen light flash
No light Power off
Indicator Mode
Remark
Specification
双线为裁切线
说明书
英文中性
A4纸，封面黑白，内印黑白
2.0
物料名称
Power Input
Audio Input
Signal Input
AC input
Connect the power cord for your monitor to the AC IN port on the
back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
VGA input
Using the D-sub (Analog) connector on the video card.
DVI input
Transmits digital video signals to the monitor. Connect
the monitor using theDVI cable.
below.
HDMI connection
Transmits the digital video and audio signals from
your PC and A/V devices to the monitor. Connect
your PC and AV device to the monitor with the
HDMI cable.
Signal Input VGA,DVI,HDMI
Audio In 2x2W
H-Frequency 30~80 KHz
V-Frequency 60~75 Hz
Temp. Storage Temp:-20°to 60°
Operation Temp：0℃to 40℃
Humidity Operation：10% to 85%
EPMON24A