TAGG PowerBass-400 User manual

USER’S MANUAL
Product Overview
Thank you so much for buying TAGG Power Bass-400 Wireless
Headphone. Our main goal is to please you with superior
sound quality and comfort combined with convenience
of hands free operation. Here is some useful piece of information
that will help you operate this headset properly.
On/Off Button
Volume Controller
LED Indicator
AUX-In
Port
Micro USB
Port
Built-in
Microphone
Headphone Controls
1
2
3
4
5
6
FUNCTION OPERATION
Power On Long Press the HOME for 3 secs
Power Off Long Press the HOME for 3 secs
In Pairing Mode Blue and Red LED will start Blinking
Blue LED will Blink
Short Press the POWER Button
Short Press the POWER Button
Long Press the Volume “ <” & “>”
Press the “<” & “>” Button
Press the “<” & “>” button while on Call
When Connected
Answer Call
End Calls
Change Track
Volume “+” & “-”
Mic Volume
Connecting with your Device:
Keep your Bluetooth Device with in 3 Ft. while Pairing.
Press the Power button of TAGG PowerBass-400 headphone for 3 secs.
Blue and Red LED will blink and it means that the headset is in
the pairing mode.
Now search for Available bluetooth devices in your
Mobile/Laptop/iPad and select TAGG PowerBass-400 from the list of
available devices.
If prompted, enter password or PIN required “0000”.
If prompted by your mobile phone to connect, click “YES”.
After Successfully connecting Blue LED will flash twice after
every 4 secs.
How to Charge:
Connect to power using Micro USB.
To better protect the battery life, kindly use only the charging
cable provided with the headset < 5V, 100 mAH-240 mAH.
Allow 1-2 hours to completely charge the headset.
LED Indications:
While Charging - Red LED is On.
When completely charged - Blue LED is On.
When battery is low, Red LED blinks twice after every 4 seconds
and the voice prompt will let you know that battery status.
Pairing Mode- Blue and Red LED starts Flashing.
Reconnect the Headphone:
If the connection is lost, TAGG PowerBass-400 will try to reconnect
automatically.
If it does not reconnect, kindly press the Power button for 3 secs
and reconnect manually through your mobile Bluetooth.
Common Problems and Solution:
Mobile Can’t Find the Headphone:
Kindly restart your phone and the Headphone.
There’s always noise and the Bluetooth keeps
disconnecting:
The Headphone needs to be charged.
Make sure you are not beyond the signal distance.
PowerBass-400

Thank you very much for choosing TAGG as your trusted brand of
Bluetooth Headphone and sincerely hope you enjoy the great sound
and comfort TAGG provides. We love making our customers
happy by providing true value with our products. If for any reason
you are not completely satisfied with your purchase let us know
immediately and we will do anything to make sure you are happy.
Contact Us : [email protected]
Website : www.taggdigital.com
We are Social, Follow us on:-
https://www.facebook.com/TAGGDigital/
https://twitter.com/TAGGOfficial
https://www.instagram.com/tagg_digital/
https://www.youtube.com/channel/UCjLX5UcN_tHFaMeFBpIqJhg
Safety Rules:
Avoid Overcharging
Do not keep the headphone exposed to hot temperature.
Never disassemble or modify your headphone because of
any reason.
Make sure the device does not get wet.
EXCEPTIONAL WARRANTY:
All our products are completely covered by a 30 Days
Express Exchange Program and 12 Months Warranty on
Labor and parts defects.
Plus, we offer simply the best, 24 hrs customer support that
will never rest until you are absolutely satisfied!
Write us : [email protected]
Call us : 011-41012060
Designed By : 4COM Technologies
Bluetooth is connected but you are unable to listen to music:
Check your setting to adjust the sound to hands free.
Some mobiles required you to select the device twice.
Some mobile devices do not have complete stereo Bluetooth
kindly connect the headset with another device to check if it is
functioning properly.
Bluetooth Password:
“0000”
Maximum Distance:
20 ft.
Red LED is not ON while charging:
This could be due to lack of use of Headphone. It needs to be
charged for 30 min before the Red LED occurs.
Using 3.5mm Wired Cable on Headphones:
Connect one end of the included 3.5mm Auxiliary Cable to the
AUX-IN jack on the headphones, and the other end of the cable
to the external device's headphone jack port (smartphone,
tablet, computer or MP3 player).
Open a media player on your device and click on PLAY to start
playing your music.
Use the controls on your connected device to control music
playback and volume.
Accessories List:
1 x PowerBass - 400 Headphone
1 x Charging Cable
1 x Aux Cable
1 x Manual