Taiga Concept LOHKO BOX 1 User manual
LOHKO BOX 1
ASSEMBLY
GUIDE
x2
2,5hwww.taigaconcept.fi/assembly
TAIGA Product
Assembly Guides
& Videos
6/2021
www.taigaconcept.com
Installation
Open the packing carefully not to damage the
product.
Always follow assembly instruction when you
assemble your product.
When moving the glass elements make sure
you don’t place them on hard surfaces as they
will break easily.
When assembling the product make sure you
can support the wall element until they are
stable.
Taiga Concept recommend to use authorized
installation persons and will not take
responsibility for any harm to persons or
goods due to irresponsible actions.
Product may have some smell after assembling
but it will disappear in few weeks.
Before installation find out your country fire
regulation and contact your local Taiga dealer.
Do not carry out your own modifications to the
product, as it will automatically end warranty.
Check building / floor weight capacity before
assembling the products.
Maintenance
After assembling the product, wipe all surfaces
with clean damp cloth. Avoid using too much
water, as it will damage the product. Prolonged
direct sunlight may change the color of
wooden surfaces over time.
Check tightness of hinges and door position
every six month.
Choosing location
Always place the product inside the building.
Room temperature needs to be minimum 10°C.
Do not place the product to space that is wet
or where has high humidity.
Place the product so that the minimum space
between roof element and ceiling needs to be
at least 10 cm. Building ceiling height minimum
of 230 cm.
When placing the product make sure the door
will not block any walkway and that it does not
damage when open.
Maximum floor deflection ≤ 0,7° degree /
meter.
Warranty / Contact
Safety Equipment
Upon successful installation please inform the
local Taiga dealer to activate the warranty.
It is recommended to use Taiga Concept local
dealers authorized assembling person.
If you have any questions or problems
during installation, please contact your local
Taiga dealer or Taiga Concept’s installation
manager.
+358 40 138 4302
warranty@taigaconcept.fi
Warranty is not valid if assembly has been
carried out in contradiction to the installa-
tion guide or if it’s done by a person or a
team that has not been authorized by Taiga
Concept or Taiga Concept local dealers.
Always use suitable safety equipment when
installing Taiga Concept products including
safety glasses, shoes, helmet and gloves.
2
Take image of the damaged item
before opening the package for
later documentation, then
continue opening package
If you find damage please
take images before
opening the package
Check if there is any damage
to the packageor pallet
Remove top cover and check that
there are no signs of damage before
unpacking.
If you find damage please take
images before unpacking the product
elements
If you damage elements while carrying,
take images of the damages
If you damage elements
while assembling the product,
take images of damages
Assemble the product Activate product warranty
www.taigaconcept.fi/activate
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
Take image of the damage,
check which element / part
is damaged and contact
the local Taiga dealer
Carry the elements
Note: Take extra care
when carrying glass
If you find damage, document with
photos according instructions
3
1. Take images where you can see
full package from 2 different angles
which show the damage
1. Take images where you can see
full package from 2 different angles
which show the damage
1. Take images where you can see
the whole element from 2 different angles
which show the damage
2. Take closer images of the damage
2. Take closer images of the damage
2. Take closer images of the damage and
check which element / glass is damaged.
3. Contact your local Taiga dealer
3. Contact your local Taiga dealer
3. Contact your local Taiga dealer
How to document if you cause damage while carry orassembling the product
4
1x CW002
1x CF001
1x SR004
1x CG001
1x CG002
2x CA1xx
1x SCA001
1x CD001
1x CD002
2x CD003
1x CW001
1x CR001
1x CT001
1x CT002
Floor / Roof / Walls
Glass / Acoustic panel / Frames / Seal
Elements &
Components
2x SS002
2x SS001 1x SH00x
3x SM001
2x SR001
2x SF005
6x SC001
30x SC002
Doorframe &
acoustic panel
Table bottom cover Hinges
Roof Roof
16x SR003
8x SC003 4x SC005
1x SF001
1x SF003
Length 2100 mm
Length 980 mm
3,5 X 20
4,5 X 30
4,5 X 30
8x SC004
Table support &
roof hatch
4,2 x 13
Cables / Screws / Accessories
1x EC1xx
500cm 100cm
1x EP109
14x SF002
6,3 x 80
5
Equipments
& tools
Screw machine+ bits
GlovesSafety glassesSafety shoesSafety helmet
Cleaning toolsProtection material
for elements and glasses
Glass suction cup
min weight capacity 50 kg /pcs
2
x
+
Hex key set
Step ladder Rubber hammer
Spirit or laser level
Wrenches
Carpet knife or
Scissors
6
ATTENTION
Never put glass against hard surface, use always carton or carpet under the glass.
Use always 2 person and suction cups to lift glass
X
7
8X
SR003
CF001
Important! Do not continue before oor is level.
Hex key 4 mm
8
CW002
x2
9
CG002
x2
If the back glass is close to wall
clean the glass before placing it
Keep the wall upright until the glass element is added. 10
SS002
x2
Add seal 2/3 of the length
11
CW001
x2
In case of power supply from oor level,
connect supply cable (EC1xx) to connector
in wall before installing the wall.
In case of power supply from ceiling
check page 36
12
SS002
x2
13
8X
SR003
14
SC002
6X
2X
SF005
15
x2
16
CT001
x2
X
Do not scratch the wall
17
SS002
SC004
4X
x2
18
SC003
8X
CT002
19
x2
20
Table of contents
