TaiShan TQ2.25XT User manual

Web :www.taishansports.cn
Installation o
f
TQ2.25XT
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
f Concave box basketball stand
TQ2.25XT
（TQ1454）
Shandong Taishan Sports Equipment Co.,Ltd
Concave box basketball stand

Web :www.taishansports.cn
1) The equipment can only be used indoors;
2) The equipment is only suitable for
basketball fitness and entertainment;
3) The equipment is strictly prohibited to climb;
4) It is forbidden to use by children under 10 years old;
5) It is strictly forbidden to use sharp objects to hit the back
cover;
6) It is strictly forbidden to hang the body on the hoop;
7) Equipment installation and commissioning must be guided by professionals from
the manufacturer;
8) The equipment is strictly prohibited to be used during the debugging
9) Abnormal noises or obvious loose parts during the use of the equipment should be
stopped immediately;
10)
Before using the equipment, check whether all parts of the equipment are intact
and tightly locked, otherwise it should not be used;
11
) Before using the equipment, warm up sufficiently to prevent injury. If you feel
obvious pain or
discomfort during use, please do not continue to use it to avoid
further injury;
12
) Do not use heavy objects to hit the surface of the equipment, and do not use
sharp objects to scratch the equipment;
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
1) The equipment can only be used indoors;
2) The equipment is only suitable for basketball training, basketball competitions,
basketball fitness and entertainment;
3) The equipment is strictly prohibited to climb;
4) It is forbidden to use by children under 10 years old;
5) It is strictly forbidden to use sharp objects to hit the backboard and protective
6) It is strictly forbidden to hang the body on the hoop;
7) Equipment installation and commissioning must be guided by professionals from
8) The equipment is strictly prohibited to be used during the debugging
9) Abnormal noises or obvious loose parts during the use of the equipment should be
Before using the equipment, check whether all parts of the equipment are intact
and tightly locked, otherwise it should not be used;
) Before using the equipment, warm up sufficiently to prevent injury. If you feel
discomfort during use, please do not continue to use it to avoid
) Do not use heavy objects to hit the surface of the equipment, and do not use
sharp objects to scratch the equipment;
Shandong Taishan Sports Equipment Co.,Ltd
basketball training, basketball competitions,
board and protective
7) Equipment installation and commissioning must be guided by professionals from
8) The equipment is strictly prohibited to be used during the debugging
process;
9) Abnormal noises or obvious loose parts during the use of the equipment should be
Before using the equipment, check whether all parts of the equipment are intact
) Before using the equipment, warm up sufficiently to prevent injury. If you feel
discomfort during use, please do not continue to use it to avoid
) Do not use heavy objects to hit the surface of the equipment, and do not use

Web :www.taishansports.cn
13
) Do not use liquids other than neutral detergent
coating surface of the equipment;
14
) Do not place heavy objects on the surface of the equipment for a long time;
15
) The equipment protective cover is formed by splicing multiple pieces of
protective cover, which may cause colo
normal;
16
) When using, pay attention to the operation according to the warning signs of the
product identification;
Introduction:
This product is suitable for indoor or outdoor venues. It is suitable for various grounds
such as cement, plastic, wood floor, asphalt, etc. It can be used for basketball training,
ordinary basketball competitions
basketball sports. The equipment is equipped with safety protection pads, which has
high safety; the product is composed of parts as shown in the figure.
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
) Do not use liquids other than neutral detergent and water to wipe the metal
coating surface of the equipment;
) Do not place heavy objects on the surface of the equipment for a long time;
) The equipment protective cover is formed by splicing multiple pieces of
protective cover, which may cause color difference, and slight color difference is
) When using, pay attention to the operation according to the warning signs of the
This product is suitable for indoor or outdoor venues. It is suitable for various grounds
such as cement, plastic, wood floor, asphalt, etc. It can be used for basketball training,
ordinary basketball competitions, basketball fitness and entertainment and other related
basketball sports. The equipment is equipped with safety protection pads, which has
high safety; the product is composed of parts as shown in the figure.
Shandong Taishan Sports Equipment Co.,Ltd
and water to wipe the metal
) Do not place heavy objects on the surface of the equipment for a long time;
) The equipment protective cover is formed by splicing multiple pieces of
r difference, and slight color difference is
) When using, pay attention to the operation according to the warning signs of the
This product is suitable for indoor or outdoor venues. It is suitable for various grounds
such as cement, plastic, wood floor, asphalt, etc. It can be used for basketball training,
, basketball fitness and entertainment and other related
basketball sports. The equipment is equipped with safety protection pads, which has

Web :www.taishansports.cn
Figure 1 The composit
ion of the
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
ion of the
basketball stand
Shandong Taishan Sports Equipment Co.,Ltd

Web :www.taishansports.cn
Product Parameter：
1) Length of boom: 2250mm;
2) Basket height: 3
050mm;
3) Basket diameter: 450mm;
4) The maximum weight of the basket: 320kg;
5) Backboard size: 1800mm×1050;
6) Backboard type: tempered glass backboard;
7) The thickness of the front protective cover: 100mm;
8) The thickness of the arm protection cover:
9) Total weight: about 1025kg.
Installation:
When the product leaves the factory, the overall assembly has been completed.
In o
rder to facilitate transportation and removal o
overall basketball stand is in a folded state, which can realize the overall
movement of the basketball stand, as shown in Figure 2.
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
1) Length of boom: 2250mm;
050mm;
3) Basket diameter: 450mm;
4) The maximum weight of the basket: 320kg;
5) Backboard size: 1800mm×1050;
6) Backboard type: tempered glass backboard;
7) The thickness of the front protective cover: 100mm;
8) The thickness of the arm protection cover:
35mm;
9) Total weight: about 1025kg.
When the product leaves the factory, the overall assembly has been completed.
rder to facilitate transportation and removal of the backboard, basket
overall basketball stand is in a folded state, which can realize the overall
movement of the basketball stand, as shown in Figure 2.
Shandong Taishan Sports Equipment Co.,Ltd
When the product leaves the factory, the overall assembly has been completed.
f the backboard, basket
, the
overall basketball stand is in a folded state, which can realize the overall

Web :www.taishansports.cn
1)
As shown in Figure 3, install the
extension arm using
④
and ⑥ non-
metallic insert lock nut M10;
Figure 3 Backboard and basket installation
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
As shown in Figure 3, install the
② backboard and ③
basket to the
④
hexagon socket screw M10×80,
⑤
metallic insert lock nut M10;
Figure 3 Backboard and basket installation
Shandong Taishan Sports Equipment Co.,Ltd
basket to the
①
⑤
flat washer 10

Web :www.taishansports.cn
2)
As shown in Figure 4, use
washer 10, ⑤
flat washer to fix the
plate on the outrigger.
At this time, the ohm plate is not locked. Can move
along the notch;
Figure 4 Installation of ohm board and backboard connector
3)
As shown in Figure 5, use
elastic washer 12, ⑤
ear plate and ①
backboard connector, use
×20, ⑦
elastic washer 10,
connecting ear plate and
extension arm;
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
As shown in Figure 4, use
③ hex socket head screw M10
×
flat washer to fix the
② backboard conne
ctor with
At this time, the ohm plate is not locked. Can move
Figure 4 Installation of ohm board and backboard connector
As shown in Figure 5, use
③
hex socket flat head screw M12
flat washer 12 to lock the ②
backboard connecting
backboard connector, use
⑥
hex socket head screw M10
elastic washer 10,
⑧
flat washer 10 lock the backboard
connecting ear plate and
⑨
backboard, and lock the ohm plate to the
Shandong Taishan Sports Equipment Co.,Ltd
×
30, ④ spring
ctor with
① ohm
At this time, the ohm plate is not locked. Can move
hex socket flat head screw M12
×30, ④
backboard connecting
hex socket head screw M10
flat washer 10 lock the backboard
backboard, and lock the ohm plate to the

Web :www.taishansports.cn
Figure 5 Backboard connector and backboard connection ear plate installation
4) Tighten the outrigger protective cover to the front end of the outrigger with
velcro;
5) As shown in the figure, use 4 M16×35 hexagon socket flat head screws to
connect the column to the extension arm, and use a forklift to lift the extension
arm that h
as been connected to the column;
6) Install the lifting and extension arm to the box body (the counterweight is
already in the box body) using 4 M16×35 hexagon socket head screws as shown
in the figure;
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
Figure 5 Backboard connector and backboard connection ear plate installation
4) Tighten the outrigger protective cover to the front end of the outrigger with
5) As shown in the figure, use 4 M16×35 hexagon socket flat head screws to
connect the column to the extension arm, and use a forklift to lift the extension
as been connected to the column;
6) Install the lifting and extension arm to the box body (the counterweight is
already in the box body) using 4 M16×35 hexagon socket head screws as shown
Shandong Taishan Sports Equipment Co.,Ltd
Figure 5 Backboard connector and backboard connection ear plate installation
4) Tighten the outrigger protective cover to the front end of the outrigger with
5) As shown in the figure, use 4 M16×35 hexagon socket flat head screws to
connect the column to the extension arm, and use a forklift to lift the extension
6) Install the lifting and extension arm to the box body (the counterweight is
already in the box body) using 4 M16×35 hexagon socket head screws as shown

Web :www.taishansports.cn
7) As shown in the figure below, use two M16×70 inne
screws to install the rear pull rod to the extension arm, and use the rear column
connecting shaft and M12×20 inner hexagon socket head screws to connect with
the box base;
8) Use M12×45 and M12×40 hexagon socket head screws to connect the
adjusting sleeve to the extension arm and the column;
9) After tightening all the screws according to the position shown in the figure,
install the front protective sleeve on the column.
10) The installation process must be completed under the guidance of factory
personnel.
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
7) As shown in the figure below, use two M16×70 inner hexagon socket head
screws to install the rear pull rod to the extension arm, and use the rear column
connecting shaft and M12×20 inner hexagon socket head screws to connect with
8) Use M12×45 and M12×40 hexagon socket head screws to connect the
adjusting sleeve to the extension arm and the column;
9) After tightening all the screws according to the position shown in the figure,
install the front protective sleeve on the column.
10) The installation process must be completed under the guidance of factory
Shandong Taishan Sports Equipment Co.,Ltd
r hexagon socket head
screws to install the rear pull rod to the extension arm, and use the rear column
connecting shaft and M12×20 inner hexagon socket head screws to connect with
8) Use M12×45 and M12×40 hexagon socket head screws to connect the
9) After tightening all the screws according to the position shown in the figure,
10) The installation process must be completed under the guidance of factory

Web :www.taishansports.cn
Placement and debugging
1) As show
n in the figure below, the dotted line represents the ground, and the
width of 50 is the field end line. Place the basketball stand on the center line of
the length of the court, and adjust the position of the basketball stand so that the
distance between
the protective sleeve and the outer side of the end line is
1005mm. And adjust the 1
height of the basket 3050±6mm, and then use the hook wrench to lock the
adjusting sleeve;
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
Placement and debugging
:
n in the figure below, the dotted line represents the ground, and the
width of 50 is the field end line. Place the basketball stand on the center line of
the length of the court, and adjust the position of the basketball stand so that the
the protective sleeve and the outer side of the end line is
1005mm. And adjust the 1
-
adjusting bolt shown in the figure below to make the
height of the basket 3050±6mm, and then use the hook wrench to lock the
Shandong Taishan Sports Equipment Co.,Ltd
n in the figure below, the dotted line represents the ground, and the
width of 50 is the field end line. Place the basketball stand on the center line of
the length of the court, and adjust the position of the basketball stand so that the
the protective sleeve and the outer side of the end line is
adjusting bolt shown in the figure below to make the
height of the basket 3050±6mm, and then use the hook wrench to lock the

Web :www.taishansports.cn
2) As shown in the figure b
loosen the nuts 5, and adjust the screws 3 and 4 to make the basket level with the
ground and the backboard perpendicular to the ground. After adjustment, tighten
all the screws and replace the protectiv
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
2) As shown in the figure below, loosen the screws 1 and 2 shown in the figure,
loosen the nuts 5, and adjust the screws 3 and 4 to make the basket level with the
ground and the backboard perpendicular to the ground. After adjustment, tighten
all the screws and replace the protectiv
e cover.
Shandong Taishan Sports Equipment Co.,Ltd
elow, loosen the screws 1 and 2 shown in the figure,
loosen the nuts 5, and adjust the screws 3 and 4 to make the basket level with the
ground and the backboard perpendicular to the ground. After adjustment, tighten

Web :www.taishansports.cn
3) After the product is installed, placed and debugged according to the
instructions, it can be used normally
Maintenance:
1) During the use of the fixed
parts of the product regularly for looseness or fall off, and fasten or replace it in
time to ensure safe use.
2) If you use this product outdoors, please clean the equipment in time after rain
or snow to prev
ent accelerating corrosion of the base after being immersed in
rain or snow for a long time.
3) Check the tightness of the basket spring every three months, and lock the
spring if it is loose.
4) After the equipment has been used for one year, it should be
maintained by professionals before use.
Warranty
1) From the date of leaving the factory, the warranty period for fixed box
basketball stands is 1 year.
2) The nets are vulnerable parts and are not covered by the warranty;
3) Damage to the equipment s
covered by the warranty.
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
3) After the product is installed, placed and debugged according to the
instructions, it can be used normally
1) During the use of the fixed box basketball stand, check all the connecting
parts of the product regularly for looseness or fall off, and fasten or replace it in
2) If you use this product outdoors, please clean the equipment in time after rain
ent accelerating corrosion of the base after being immersed in
rain or snow for a long time.
3) Check the tightness of the basket spring every three months, and lock the
4) After the equipment has been used for one year, it should be
inspected and
maintained by professionals before use.
1) From the date of leaving the factory, the warranty period for fixed box
2) The nets are vulnerable parts and are not covered by the warranty;
3) Damage to the equipment surface coating caused by scratches or bumps is not
Shandong Taishan Sports Equipment Co.,Ltd
3) After the product is installed, placed and debugged according to the
box basketball stand, check all the connecting
parts of the product regularly for looseness or fall off, and fasten or replace it in
2) If you use this product outdoors, please clean the equipment in time after rain
ent accelerating corrosion of the base after being immersed in
3) Check the tightness of the basket spring every three months, and lock the
inspected and
1) From the date of leaving the factory, the warranty period for fixed box
2) The nets are vulnerable parts and are not covered by the warranty;
urface coating caused by scratches or bumps is not

Web :www.taishansports.cn
4) The damage to the equipment caused by improper use and failure to perform
maintenance as required shall be borne by the user.
5) For equipment beyond the warranty period, free l
paid maintenance services are provided.
NO NAME
1
Inner hexagonal
wrench
2
Inner hexagonal
wrench
3
Hook wrench
4 Open-end
wrench
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
4) The damage to the equipment caused by improper use and failure to perform
maintenance as required shall be borne by the user.
5) For equipment beyond the warranty period, free lifetime technical support and
paid maintenance services are provided.
SIZE QTY
Inner hexagonal
5 1
Inner hexagonal
8 1
Hook wrench
68-72 1
wrench
17×19 1
Shandong Taishan Sports Equipment Co.,Ltd
4) The damage to the equipment caused by improper use and failure to perform
ifetime technical support and
REMARK
Tool