TaiShan TQ3.25SY User manual

Web
:www.taishansports.cn
Installation
basketball stand for competition
TQ3.25SY
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
Installation
of
Manual hydraulic
basketball stand for competition
TQ3.25SY
(TQ1451)
Shandong Taishan Sports Equipment Co.,Ltd
Manual hydraulic
basketball stand for competition

Web
:www.taishansports.cn
1) T
he equipment can only be used indoors;
2) The equipment is only suitable for basketball training, basketball competitions,
basketball fitness and entertainment;
3) The equipment is strictly prohibited to climb;
4) It is forbidden to use by children under 1
5) It is strictly forbidden to use sharp objects to hit the backboard and protective
cover;
6) It is strictly forbidden to hang the body on the hoop;
7) Equipment installation and commissioning must be guided by professionals from
the manufacturer;
8) The equipment is strictly prohibited to be used during the debugging process;
9) Abnormal noises or obvious loose parts during the use of the equipment should be
stopped immediately;
10) During the folding process of the equipment, it is strictly forbidden to enter
under the extension arm, or enter between the pull rod and the base;
11) Before using the equipment, check whether all parts of the equipment are intact
and tightly locked, o
therwise it should not be used;
12) Before using the equipment, warm up sufficiently to prevent injury. If you feel
obvious pain or discomfort during use, please do not continue to use it to avoid
further injury;
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
he equipment can only be used indoors;
2) The equipment is only suitable for basketball training, basketball competitions,
basketball fitness and entertainment;
3) The equipment is strictly prohibited to climb;
4) It is forbidden to use by children under 1
0 years old;
5) It is strictly forbidden to use sharp objects to hit the backboard and protective
6) It is strictly forbidden to hang the body on the hoop;
7) Equipment installation and commissioning must be guided by professionals from
8) The equipment is strictly prohibited to be used during the debugging process;
9) Abnormal noises or obvious loose parts during the use of the equipment should be
10) During the folding process of the equipment, it is strictly forbidden to enter
under the extension arm, or enter between the pull rod and the base;
11) Before using the equipment, check whether all parts of the equipment are intact
therwise it should not be used;
12) Before using the equipment, warm up sufficiently to prevent injury. If you feel
obvious pain or discomfort during use, please do not continue to use it to avoid
Shandong Taishan Sports Equipment Co.,Ltd
2) The equipment is only suitable for basketball training, basketball competitions,
5) It is strictly forbidden to use sharp objects to hit the backboard and protective
7) Equipment installation and commissioning must be guided by professionals from
8) The equipment is strictly prohibited to be used during the debugging process;
9) Abnormal noises or obvious loose parts during the use of the equipment should be
10) During the folding process of the equipment, it is strictly forbidden to enter
under the extension arm, or enter between the pull rod and the base;
11) Before using the equipment, check whether all parts of the equipment are intact
12) Before using the equipment, warm up sufficiently to prevent injury. If you feel
obvious pain or discomfort during use, please do not continue to use it to avoid

Web
:www.taishansports.cn
13) Do not use heavy objects to hit the sur
sharp objects to scratch the equipment;
14) Do not use liquids other than neutral detergent and water to wipe the metal
coating surface of the equipment;
15) Do not place heavy objects on the surface of the equipment f
16) The equipment protective cover is formed by splicing multiple pieces of
protective cover, which may cause color difference, and slight color difference is
normal;
17) When using, pay attention to the operation according to the warning s
product identification;
18) This product is manufactured in accordance with the requirements of the
International Basketball Federation (FIBA). However, the equipment that meets the
International Basketball Federation (FIBA) standards does not
any risks. The user has not been trained or is not under the supervision of the coach
Injuries caused by the use of equipment shall be borne by the user.
Introduction:
This
product can be applied to indoor basketball. The equipment is equipped with
saf
ety protection pads, which is high in safety; the basketball stand uses manual
hydraulic system to assist in folding, and it can be moved after folding. It has a standard
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
13) Do not use heavy objects to hit the surface of the equipment, and do not use
sharp objects to scratch the equipment;
14) Do not use liquids other than neutral detergent and water to wipe the metal
coating surface of the equipment;
15) Do not place heavy objects on the surface of the equipment for a long time;
16) The equipment protective cover is formed by splicing multiple pieces of
protective cover, which may cause color difference, and slight color difference is
17) When using, pay attention to the operation according to the warning s
18) This product is manufactured in accordance with the requirements of the
International Basketball Federation (FIBA). However, the equipment that meets the
International Basketball Federation (FIBA) standards does not mean to eliminate
any risks. The user has not been trained or is not under the supervision of the coach
Injuries caused by the use of equipment shall be borne by the user.
product can be applied to indoor basketball. The equipment is equipped with
ety protection pads, which is high in safety; the basketball stand uses manual
hydraulic system to assist in folding, and it can be moved after folding. It has a standard
Shandong Taishan Sports Equipment Co.,Ltd
face of the equipment, and do not use
14) Do not use liquids other than neutral detergent and water to wipe the metal
or a long time;
16) The equipment protective cover is formed by splicing multiple pieces of
protective cover, which may cause color difference, and slight color difference is
17) When using, pay attention to the operation according to the warning s
igns of the
18) This product is manufactured in accordance with the requirements of the
International Basketball Federation (FIBA). However, the equipment that meets the
mean to eliminate
any risks. The user has not been trained or is not under the supervision of the coach
product can be applied to indoor basketball. The equipment is equipped with
ety protection pads, which is high in safety; the basketball stand uses manual
hydraulic system to assist in folding, and it can be moved after folding. It has a standard

Web
:www.taishansports.cn
24-
second timer and signal light strip, which can be used for basketball related spor
the product consists of the parts shown in the figure. composition.
sheet, and the lower layer is composed of 32 mats of 2m×1m×6cm
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
second timer and signal light strip, which can be used for basketball related spor
the product consists of the parts shown in the figure. composition.the site is
sheet, and the lower layer is composed of 32 mats of 2m×1m×6cm
Shandong Taishan Sports Equipment Co.,Ltd
second timer and signal light strip, which can be used for basketball related spor
ts;
the site is
a cover

Web
:www.taishansports.cn
Figure 1 The composition of the elastically balanced basketball stand for competition
Product Parameter：
1) Length of boom: 3250mm;
2) Basket height
: 3050mm;
3) Basket diameter: 450mm;
4) The maximum weight of the basket: 320kg;
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
Figure 1 The composition of the elastically balanced basketball stand for competition
1) Length of boom: 3250mm;
: 3050mm;
3) Basket diameter: 450mm;
4) The maximum weight of the basket: 320kg;
Shandong Taishan Sports Equipment Co.,Ltd
Figure 1 The composition of the elastically balanced basketball stand for competition

Web
:www.taishansports.cn
5) Backboard size: 1800mm×1050;
6) Backboard type: tempered glass backboard;
7) The thickness of the front protective cover: 100mm;
8) The thickness of the arm protection cover: 35mm;
9) Diameter of walking wheel: 200mm;
10) Total weight: about 1800kg.
Installation:
When the product leaves the factory, the overall assembly has been completed.
In order to facilitate transportation and removal of the
backboard connector and 24
folded state, which can realize the overall movement of the basketball stand, as
shown in Figure 2.
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
5) Backboard size: 1800mm×1050;
6) Backboard type: tempered glass backboard;
7) The thickness of the front protective cover: 100mm;
8) The thickness of the arm protection cover: 35mm;
9) Diameter of walking wheel: 200mm;
10) Total weight: about 1800kg.
When the product leaves the factory, the overall assembly has been completed.
In order to facilitate transportation and removal of the backboard, basket,
backboard connector and 24
-
second timer, the overall basketball stand is in a
folded state, which can realize the overall movement of the basketball stand, as
Unit MM
Shandong Taishan Sports Equipment Co.,Ltd
When the product leaves the factory, the overall assembly has been completed.
backboard, basket,
second timer, the overall basketball stand is in a
folded state, which can realize the overall movement of the basketball stand, as
Unit MM

Web
:www.taishansports.cn
1)
As shown in Figure 3, install the
extension arm using
④
and ⑥ non-
metallic insert lock nut M10;
Figure 3 Backboard and basket installa
2)
As shown in Figure 4, use
washer 10, ⑤
flat washer to fix the
plate on the outrigger.
At this time, the ohm plate is not locked. Can move
along the notch;
Figure 4 Installati
on of ohm board and backboard connector
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
As shown in Figure 3, install the
② backboard and ③
basket to the
④
hexagon socket screw M10×80,
⑤
metallic insert lock nut M10;
Figure 3 Backboard and basket installa
tion
As shown in Figure 4, use
③ hex socket head screw M10
×
flat washer to fix the
②
backboard connector with
At this time, the ohm plate is not locked. Can move
on of ohm board and backboard connector
Shandong Taishan Sports Equipment Co.,Ltd
basket to the
①
⑤
flat washer 10
×
30, ④ spring
backboard connector with
① ohm
At this time, the ohm plate is not locked. Can move

Web
:www.taishansports.cn
3)
As shown in Figure 5, use
elastic washer 12, ⑤
ear plate and ①
backboard connector, use
×20, ⑦ el
astic washer 10,
connecting ear plate and
extension arm;
Figure 5 Bac
kboard connector and backboard connection ear plate installation
4) As shown in Figure 6, use
elastic washer 10, ③
flat washer 10 to lock the
extension arm
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
As shown in Figure 5, use
③
hex socket flat head screw M12
flat washer 12 to lock the ②
backboard connecting
backboard connector, use
⑥
hex socket head screw M10
astic washer 10,
⑧
flat washer 10 lock the backboard
connecting ear plate and
⑨
backboard, and lock the ohm plate to the
kboard connector and backboard connection ear plate installation
4) As shown in Figure 6, use
①
hex socket flat head screw M10
flat washer 10 to lock the
④
24 second timer on the
Figure 6 24 second timer installation
Shandong Taishan Sports Equipment Co.,Ltd
hex socket flat head screw M12
×30, ④
backboard connecting
hex socket head screw M10
flat washer 10 lock the backboard
backboard, and lock the ohm plate to the
kboard connector and backboard connection ear plate installation
hex socket flat head screw M10
×30, ②
24 second timer on the
⑤

Web
:www.taishansports.cn
5) Tighten the outrigger protective cover to the front end of the outrigger with
Velcro;
6) Unfolding and folding of the arm:
1. Turn the control handle of the manual hydraulic pump to the "B" mark, and
press the handle of the manual hydraulic pump to e
process, the base of the basketball stand will then rotate upward and fall to the
ground. The unfolding situation is shown in Figure 2. After unfolding, use a
hook wrench to lock the 1
protective sleeves on both sides (the back of the side protective sleeve and the
velcro on the base) according to the position Connect firmly. Finally, put the
2-
detachable protective cover in Figure 8 into the vacant position.
Figure 7 Arm extension
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
5) Tighten the outrigger protective cover to the front end of the outrigger with
6) Unfolding and folding of the arm:
1. Turn the control handle of the manual hydraulic pump to the "B" mark, and
press the handle of the manual hydraulic pump to extend the arm. During the
process, the base of the basketball stand will then rotate upward and fall to the
ground. The unfolding situation is shown in Figure 2. After unfolding, use a
hook wrench to lock the 1
-
adjustment sleeve as shown in Figure 7 and st
protective sleeves on both sides (the back of the side protective sleeve and the
velcro on the base) according to the position Connect firmly. Finally, put the
detachable protective cover in Figure 8 into the vacant position.
Shandong Taishan Sports Equipment Co.,Ltd
5) Tighten the outrigger protective cover to the front end of the outrigger with
1. Turn the control handle of the manual hydraulic pump to the "B" mark, and
xtend the arm. During the
process, the base of the basketball stand will then rotate upward and fall to the
ground. The unfolding situation is shown in Figure 2. After unfolding, use a
adjustment sleeve as shown in Figure 7 and st
ick the
protective sleeves on both sides (the back of the side protective sleeve and the
velcro on the base) according to the position Connect firmly. Finally, put the
detachable protective cover in Figure 8 into the vacant position.

Web
:www.taishansports.cn
2. Contrary to the unfolding process, first remove the 2
sleeve in Figure 8 from the front protective sleeve; then remove the protective
sleeves on both sides; us
e a hook wrench to loosen the 1
in Figure 1 ; Turn the manual hydraulic pump control handle to the "A" mark,
press the manual hydraulic pump handle to fold the extension arm until the
extension arm stops falling.
Figure 8 Sheath inst
allation
7) Basketball hoop placement and debugging:
1. As shown in Figure 9, the dotted line represents the ground, and the width of
50mm is the field end line. Place the basketball stand on the center line of the
length of the court, adjust the position
between the protective sleeve and the outer side of the end line is 2000mm;
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
2. Contrary to the unfolding process, first remove the 2
-
removable protective
sleeve in Figure 8 from the front protective sleeve; then remove the protective
e a hook wrench to loosen the 1
-
adjusting sleeve shown
in Figure 1 ; Turn the manual hydraulic pump control handle to the "A" mark,
press the manual hydraulic pump handle to fold the extension arm until the
extension arm stops falling.
allation
7) Basketball hoop placement and debugging:
1. As shown in Figure 9, the dotted line represents the ground, and the width of
50mm is the field end line. Place the basketball stand on the center line of the
length of the court, adjust the position of the basketball stand so that the distance
between the protective sleeve and the outer side of the end line is 2000mm;
Shandong Taishan Sports Equipment Co.,Ltd
removable protective
sleeve in Figure 8 from the front protective sleeve; then remove the protective
adjusting sleeve shown
in Figure 1 ; Turn the manual hydraulic pump control handle to the "A" mark,
press the manual hydraulic pump handle to fold the extension arm until the
1. As shown in Figure 9, the dotted line represents the ground, and the width of
50mm is the field end line. Place the basketball stand on the center line of the
of the basketball stand so that the distance
between the protective sleeve and the outer side of the end line is 2000mm;

Web
:www.taishansports.cn
Unit: mm
Figure 9 Placement of basketball hoop
2. As shown in Figure 10, use a hook wrench to loosen the two lock nuts
③
in the figure, adjust the adjustment bolts shown in the figure below
that the height of the basket is 3050
completion ；
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
Figure 9 Placement of basketball hoop
2. As shown in Figure 10, use a hook wrench to loosen the two lock nuts
in the figure, adjust the adjustment bolts shown in the figure below
that the height of the basket is 3050
±6mm, and then tighte
n the lock nuts after
Shandong Taishan Sports Equipment Co.,Ltd
2. As shown in Figure 10, use a hook wrench to loosen the two lock nuts
① and
in the figure, adjust the adjustment bolts shown in the figure below
②, so
n the lock nuts after

Web
:www.taishansports.cn
Figure 10 Basketball hoop adjustment
3. As shown in Figure 10, loosen the screws
figure, and adjust the ⑥
ground and the backboard perpendicular to the ground. Tighten all screws after
adjustment, and replace the arm prot
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
Figure 10 Basketball hoop adjustment
3. As shown in Figure 10, loosen the screws
④, ⑤, and ⑦
shown in the
and ⑧
screws to make the basket level with the
ground and the backboard perpendicular to the ground. Tighten all screws after
adjustment, and replace the arm prot
ection cover.
Shandong Taishan Sports Equipment Co.,Ltd
shown in the
screws to make the basket level with the
ground and the backboard perpendicular to the ground. Tighten all screws after

Web
:www.taishansports.cn
Maintenance:
1. It is recommended to wipe the mat with a clean cloth dipped in water or a
neutral detergent after use.
2
. Check every month whether the product jacket is damaged and whether the
product has obvious
unevenness.
3
. After using the product for one year, it is recommended to use it after
inspection by professionals
Warranty
1) From the date of delivery, the warranty period of the elastic balance basketball
stand for competition is 1 year.
2) The nets are vulnerable parts and are not covered by the warranty;
3) Damage to the eq
uipment surface coating caused by scratches or bumps is not
covered by the warranty.
4) The damage to the equipment caused by improper use and failure to perform
maintenance as required shall be borne by the user.
5) For equipment beyond the warranty perio
paid maintenance services are provided.
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
1. It is recommended to wipe the mat with a clean cloth dipped in water or a
neutral detergent after use.
. Check every month whether the product jacket is damaged and whether the
unevenness.
. After using the product for one year, it is recommended to use it after
inspection by professionals
1) From the date of delivery, the warranty period of the elastic balance basketball
stand for competition is 1 year.
2) The nets are vulnerable parts and are not covered by the warranty;
uipment surface coating caused by scratches or bumps is not
4) The damage to the equipment caused by improper use and failure to perform
maintenance as required shall be borne by the user.
5) For equipment beyond the warranty period, free lifetime technical support and
paid maintenance services are provided.
Shandong Taishan Sports Equipment Co.,Ltd
1. It is recommended to wipe the mat with a clean cloth dipped in water or a
. Check every month whether the product jacket is damaged and whether the
. After using the product for one year, it is recommended to use it after
1) From the date of delivery, the warranty period of the elastic balance basketball
2) The nets are vulnerable parts and are not covered by the warranty;
uipment surface coating caused by scratches or bumps is not
4) The damage to the equipment caused by improper use and failure to perform
d, free lifetime technical support and

Web
:www.taishansports.cn
NO NAME
1
Inner hexagonal
wrench
2
Inner hexagonal
wrench
3
Inner hexagonal
wrench
4
Hook wrench
5 Open-
end wrench
Shandong Taishan Sports Equipment Co.,Ltd
:www.taishansports.cn
SIZE QTY
Inner hexagonal
5 1
Inner hexagonal
8 1
Inner hexagonal
12 1
Hook wrench
68-72 1
end wrench
17×19 1
Shandong Taishan Sports Equipment Co.,Ltd
REMARK
Tool