© Copyright 2020 Tallac Networks
The information contained herein is subject to change without notice ,Tallac Networks shall not be liable for technical or editorial errors or omissions contained herein.
Tallac Networks
ECP100-5P Quick Start Guide
Discovery - The ECP100-5P Discovery capability will discover and display a list of any connected
devices in the branch office. To enable discovery go to the “Actions”gear wheel on the upper
right side of the device view screen and select “Enable Discovery”.
To view the list of discovered clients, go to the “Site”level on the left navigation bar and go to
the “Discovered Clients”tab . You can select different views of discovered
clients by selecting hour, day, week or month views .
Vulnerability Scans - Vulnerability Scans perform a scan/penetration test to identify open and
possibly vulnerable application services. The vulnerability scan scans devices on the network,
determines what application ports are open and closed, does OS fingerprinting and identifies the
version of services that are running in addition to evaluating those services for vulnerabilities.
The scan provides a detailed report that can be exported and archived to support security,
compliance, and auditing. To run Vulnerability Scans go to the “Site”level on the left navigation
bar and go to the “Discovered Clients”tab . Push the “Start”button
under the client scan column to start a scan on a specific device. Once the vulnerability scan is
completed push the “View”button to view the specific report.
WAN/Internet Statistics –provides continuous monitoring of WAN/internet connectivity and
provides WAN statistic reports and usage by client. You can select specific report views via
customizable time period snapshots for reporting by hour, day, week or month
2) Custom Monitoring Rules –provide the ability to set customized rules and automated
actions for Ping or HTTP tests for any port in addition to allowing easy customization of
policies for test intervals, retries, and thresholds and alerts. To configure custom
monitoring rules, go the “Rules”tab and in the “Monitoring Rules”section,
select the “+New”button to configure new monitoring rules.
