Talos Security Peephole Viewer PVLCD3 User manual

Peephole Viewer PVLCD3
INSTRUCTION MANUAL
www.talossecurity.com

1
1
2
4
8
11
12
Contents
Introduction
Parts
I.
II.
III.Functions
IV.Operation Instruction
V.Installation Instruction
VI.Specifications
VII.Cautions
1
I. Introduction
II. Parts
One indoor monitor
wire,bracket,instruction manual,installment parts.
Lithium battery and charger .
Package includes: outdoor camera,
Thank you for buying the PVLCD3 “Security Peephole Viewer”.
This product is based on our newest multi-function touch screen
design and simple DIY installation. With closed circuit, door
camera and indoor display, provides a DVR function for viewing
all visitors that come to your door. You can view outdoor activity
anytime, and withthe integrated visible light function visitors
can be seen clearly at night. The attractive and fashionable design,
DVR feature and easy installation makes the PVLCD3 a great
addition to any home security system.
Please read both the installation and operation introductions
with care.

Speaker
2
III. Functions
1.Indoor Monitor 2.Outdoor Camera
3.Bracket
4.Cable 5.Fittings 6.Instruction
manual 7.Lithium battery
and charger
Monitor Button
2.Outdoor Camera Unit
3
Camera Lens
Infrared Light
Light Sensor
Calling Button
For SD card
indoor monitor
Switch Button
Menu Button
Touch LED TFT screen
For SIM card
PEEPHOLE VID EO DOOR BELL
INST RUGT ION MANU AL
Apply to 202C se ries pr oduct s
1. Indoor Monitor Unit

54
In monitor state, press camera button to take photo. Press
“Back” button to return to monitor state.
D.Monitor Function
In the main interface, press button entering into monitor
state. Users can view through outdoor
camera. In monitor state, users can adjust parameter. Press
“Back” button to enter into monitor state, press it again to
exit.
E.Take Photos：
C.Calling Function：
In standby or working state,visitors press the calling button
on the outdoor unit,
Press for larger ima ge(4X Zoom).
the bell rings and photos will be taken
and st ored au toma tically.
When the unit is on, press
(menu button ) to enter main menu.
1.Visitor’s photos
1 view
2 delect
3 delect all document
4 storage locationl
OK BACK
OPTION
F.Menu setup function
Visitor’s Photos
IMG0001A.JPG
11.01.01 21:48:55
IMG0002A.JPG
11.01.01 21:49:55
IMG0003A.JPG
11.01.01 21:58:25
OPTION BACK
You can view visitors' photos
.Press“option” button,
according to time and
date can view additional menu
choices
A.Status Instruction：
Off state: Product is off.
Standby state: Product is in sleep state while screen is off.
Working state: LCD screen is on.
B. On/Off State：
Press and hold power s about 3 seconds to turn ONwitch button
IV. Operation Instruction
Monitor State: Displaying camera view.
Menu state: Press button to enter
menu.
Press about 3 seconds to turn OFF.and hold powe r switch button
2.
Visitors video
1
2 delect
3 delect all document
play
CHOOSE
BACK
OPTION
MOVO175A.avi
10.01.01 03:20:04
OPTION BACK
In this menu , all recorded video and visiting time
. Press option button , you can choose
play ,delete and delete all document.
can be viewed
Visitors video
MOVO174A.avi
10.01.01 01:04:16
MOVO173A.avi
10.01.01 01:02:28
.

3. Time/Date Setup
5、Language
In this menu
, you can set up the time and date.Press OK
In this menu
, you can choose different kinds of
button to confirm and save the settings.
Date setup
Y/M/D
Time setup
HOUR:MINUTE
language.
Language option
English
Chinese
2010/05/25
2010/05/25
OK
BACK
0
5
1
6
2
7
3
8
4
9
0
5
1
6
2
7
3
8
4
9
OK
BACK
OK
BACK
6、Other Setup
This menu includes below setting:
4.Ring Setup
1.Monitor Mode
In this menu
, you can adjust
Ring setup
2.Zone Alarm
1.Monitor Mode
the ring tone and volume setting .
1.Ring
Ring 9
2.Volume
4
OPTION
SAVE
3.Match Code
4.LCD backlight
5.Change Password
6.Restore factory settings
OK
2.Zone Alarm
3.Match Code
4.LCD backlight
5.Change Password
6.Restore factory settings
BACK
a. In ring setup menu, press option button to select the rings,
then save it.
b. In ring setup menu, press down button to set volume, then
save it.
a.Monitor Mode: Select Photo or Video function.
Ring option
1.Ring1
2.Ring 2
3.Ring 3
4.Ring 4
5.Ring 5
6.Ring 6
Ring setup
1.Ring
Ring 9
2.Volume
6
CH OOSE
BACK
SAVE
7
Other Setup

98
OK
LCD Backlight
4
Brightness
Default Factory Setting
* * * *
012 3 4
567 8 9
BACK BACK
c.Restore factory settings: Setup the factory original status,
code number is 1122.
b.LCD backlight: Adjust the backlight of monitor for best
display effect. Note: More power consumption if reaching
high brightness.
V. Installation Instruction
Outdoor Station Installation Instruction
tear off
Pic 1 Pic 2
Pic 3
1. Peel off the tape from the outdoor unit.(Pic 1)
2. Install the outdoor unit right into the peephole, and
.(Pic 2)
press
it firmly onto the door
3. Install the bracket while the wire being through it, and fix it
with the screws.(Pic 3)
Please note: if the pipe of outdoor unit is in different size, the
hole on the bracket is also different.
1. outdoor camera
(Pic 1) (Pic 2)
Φ27 X L65mm
Φ14.5 X L38mm
Φ27 X L40mm
Φ14.5 X L60mm
Φ15X L85mm
Φ27 X L85mm

1110
Install Instruction For Indoor Monitor
Battery Installation Instruction
1. Put the wire through bracket.
2.
3.
Connect the wire with indoor monitor on the back. Attention
If there is excess wire,it can be stored in the back of the
monitor.
Note the direction
of wire joint
left right
Attention to the battery touch point
Pull up
Pic 1 Pic 2
Pic 3
Pull down
VI. Specifications
Outdoor Station
Indoor Monitor
2 whit e ligh t LEDs
Resolution：
Camera：
Light Source：
Size：
Power Supply:
Screen：
Resolution:
Ring Type：
Size:
Specs
2.8" LCD screen
Standby
Power Consumptio n:
Battery
High Resolusion
16 tones
High resolution
Lowest camera degree:
100.5×66.5×18mm
Specs
1.Slide the battery cover open.(Pic1)
2.Put the battery into the compartment space.(Pic2)
3.Carefully slide the battery cover on.(Pic3)

1312
VII.Cautions
The product should be fixed on the door firmly.Do not
close the door too heavily.Note the using enviroment should
be well ventilated and not be wet.Please keep it away from
violent daylight,strong magnetic field and dust.When washing
its face,do not use chemical things,but clean ,soft and dry
cloth is strongly adviced.Do not keep such a long time for
monitor state.Do not press several buttons at one time.Do not
make the small metal objects get into the inner part.Do not
twist screws,for each of them is very important.
Instruction and notice of using battery
Please use it with our company’s product,do not match
with other products.
Non-professionals should not demolish inner construction.
If need to repair,please contact the distributor or our technical
department.
8.Do not charge .
9.Keep the battery away from sunshine and cool place.
10.Battery life is limited,
battery longer than 24 hours
it will shortened after charging
many times.If battery is infective after several
charges,please replace the battery (BL-5C)
11.Dispose of the battery properly.
Instruction and Notice of Charger
1. Put the battery in the charger first.”OK” indicate light is on,
then you can connect the charger with electricity for
recharge. If the light is not on, please check if the battery
connected well, adjust it until the light on.
2. After connected to power, the “OK” light on, “full” light
off, “charger” light blink, means charging is working.
3. If charge full, “full” is light on until the “charge” light off.
4.Please use 100-240V alternating current.
5. Please clear
.
7. Do not disassemble or modify the charger to avoid dange.
8.Do not use the charger in bathroom or some high
temperature environments.
9. Do not charge in:Direct sunlight, , temperature below 5'C
and above 40'C.,Wet or dusty place; around TV,
radio or electronic equipment.
In clean environment
6.Do not expose the charger to any liquide.
Phone number:1-888-980-8042
1.Do not throw the battery into fire,or it will explode.
2.Do not push too heavily when installing the battery,or it will
cause some danger.
3.Do not use wire or needle to make the battery short circuit.
And keep it away from the necklace or other metal things.
4.Do not weld the battery,or it will cause fire.
5.Do not disassemble battery.
6.
7.If the Battery liquid touches the skin & eye .You should flush
it and go to doctor.
Stop using the battery if it gets hot or the color and shape
changes.
www.talossecurity.com