Tamprecords Mon-T2 User manual

Temprecord International Limited
PO Box 58-430, Botany 2163 | 239D Burswood Drive, East Tamaki 2013 | Auckland, New Zealand
Phone [phone] | Fax [phone] | Email [e-mail]
www.temprecord.com
1
Temprecord Mon-T2 Loggers
How to use Mon-T2 Data Loggers
The following are quick instructions only.
Please note there is a full Help Wizard built into TempWrite software, under the Menu bar.
Help Button shown below:
Requirements before first use:
•Temprecord Reader Interface or generic USB Cable and the
•TempWrite software. Software is available for FREE download from:
http://temprecord.com/our-software/tempwrite/
Software Installation
TempWrite software is available by downloading from:
http://temprecord.com/our-software/tempwrite/
Log onasAdministrator toinstall software. Donot plug inreader or cable until after software is
installed. NOTE: TempWrite works on the following systems: Windows 7 , 8, 8.1and10
Temperature Temperature USB Temperature & RH USB
Standard Temprecord reader Generic CableOR
We recommend a reader to speed up processing batches of loggers

Temprecord International Limited
PO Box 58-430, Botany 2163 | 239D Burswood Drive, East Tamaki 2013 | Auckland, New Zealand
Phone [phone] | Fax [phone] | Email [e-mail]
www.temprecord.com
2
Mon-T
2
Data Loggers
Software Quick Icons
Hover over the quick icons to bring up hints that identify function
1.To access logger
•Insert logger in Reader Interface ensuring logger is placed facing upwards in reader as far as it can go
with the hole visible outside the reader
•Alternatively plug in USB cable
•Access logger by tapping the Space Bar on the keyboard
2. To program logger
•With TempWrite software opened press the space bar to initiate logger or click Query icon
• Select Parameters to program thelogger
• Follow Parameter general settings to program the desired parameters

Temprecord International Limited
PO Box 58-430, Botany 2163 | 239D Burswood Drive, East Tamaki 2013 | Auckland, New Zealand
Phone [phone] | Fax [phone] | Email [e-mail]
www.temprecord.com
3
Mon-T
2
Data Loggers
• Once fields are populated press Program Logger to save these settings in the logger
3.Start Logger
Start the logger in TempWrite Software by clicking the Start icon
Or start the logger byholding down Start/Stop button on the logger for 2 seconds if button has been enabled
in TempWrite software.
4.Stop Logger
The logger will stop recording data according to the Start and End settings programmed in Parameters.

Temprecord International Limited
PO Box 58-430, Botany 2163 | 239D Burswood Drive, East Tamaki 2013 | Auckland, New Zealand
Phone [phone] | Fax [phone] | Email [e-mail]
www.temprecord.com
4
Mon-T
2
Data Loggers
5.Read Logger
With TempWrite software opened and logger inserted press click the Read icon
• Select Graph to view recorded data inGraph
• Select Statistics to view full statisticaldata
• Select Values to view full list of recorded datasamples

Mon-T2 Data Loggers
Select Export icon to save data as PDF or Excel files, Compliance made easy!
6.Export Files
In the Export Screen select Report Set up Icon to choose what the PDF will include
7.Re-Use Logger.
To re-use or re-program the logger, it must be in a Ready State. Click Reuse Logger icon. Data will be
cleared and logger will be in ready mode
Temprecord International Limited
PO Box58-430, Botany 2163 |239D Burswood Drive, East Tamaki 2013 |Auckland, New Zealand
Phone [phone] |Fax [phone] |Email [e-mail]
www.temprecord.com
Report set
up icon
Logger is now ready tobe started again!
Note, Logger can be re-used using button if limits have not been breached

Temprecord International Limited
PO Box58-430, Botany 2163 |239D Burswood Drive, East Tamaki 2013 |Auckland, New Zealand
Phone [phone] |Fax [phone] |Email [e-mail]
www.temprecord.com
Mon-T2 Data Loggers
LCD Version
•To start or stop the logger using the button (if enabled in the software), hold button down until Start or
Stop is showing on the LCD screen
•When logger is running it will show the current temperature and/or humidity (depending on the model)
•On pressing the button on the logger (if enabled in the Parameters screen in the TempWrite software),
view the following:
•Maximum Temperature or Humidity
•Minimum Temperature of Humidity
•Average Temperature of Humidity
•Time above Upper limit
•Time below lower limit
•Also displays Tags (markers)