Tannoy SYSTEM 15 DMT II User manual

SYSTEM 15 DMT II MAIN MONITOR
A main monitor system for Recording and Post-production studios where the
requirement is for high performance, natural sound reproduction.
With a single coherent wavefront thanks to the 15" Dual Concentric™ point source
driver, sound presented to the engineers is remarkably distortion free. And with the
enlarged monitoring position provided by this remarkable drivers wide dispersion,
monitoring with the System 15 DMT II is particularly fatigue free.
REFERENCE MONITORING
HIGH PERFORMANCE

TECHNICAL SPECIFICATIONS
LOUDSPEAKER
Frequency response ( 1 ) 38 Hz – 25 kHz
Recommended amplifier power 50 to 400 w rms into 8 Ω
Power handling Average: (2) 200 wrms Programme: 400 wrms
Nominal Impedance 8 Ω
Sensitivity (3) 101 dB SPL /2.83V @ 1 m
Distortion < 0.5%
Dispersion (@ -6dB) 90 conical
Crossover frequency 1.1 kHz
CABINET
Drive units 15" full range, single Point Source, Dual Concentric™
Low frequency design Optimised bass-reflex loaded, in 140 litres
Cabinet construction MDF (36mm - front and back; 20.6mm - top, bottom and
sides) with energy absorbing bracing matrix and TF-2
acoustic wadding
Cabinet finish Velti shadow grey soft-texture finish. High pressure twin
laminate in shadow grey with metallic speckled finish on
top, bottom and sides
Cabinet dimensions (HxWxD) 840 mm x 550 mm x 440 mm
(33” x 21.6” x 17.3”)
Cabinet weight 45kg (99.2lbs)
Shipping dimensions (HxWxD) 940mm x 650mm x 540mm
(37” x 25.5” x 21.2”)
Shipping weight 50 kg (110.2 lbs)
Tannoy Ltd., Professional Division, Coatbridge, ML5 4TF, Scotland
Tel: [phone] Fax: [phone]
e-mail: [e-mail] Internet site: http://www.tannoy.com
TGI North America, 300 Gage Avenue, Unit One, Kitchener, Ontario, N2M 2C8, Canada
Tel: [phone] Fax: [phone]
Tannoy Nederland b.v., Anthonetta Kuijlstraat 19, 3066 GS Rotterdam
Tel: [phone] Fax: [phone]
SYSTEM 15 DMT II
The availability of new materials
and manufacturing processes
has allowed Tannoy to design
the System 15 DMT II from first
principles, producing an all new
Dual Concentric™ monitoring
system with all the classic
benefits of single point source
monitoring combined with an
exceptionally detailed but
fatigue-free sound.
APPLICATIONS
Mains reference monitoring in
professional facilities, including:
❚Recording studios
❚Mobile recording
❚Broadcast
❚Post-production
❚Audio visual
❚Film studios
NOTES:
(1) ±3dB, measured at 1m in anechoic chamber
(2) Long term power handling capacity as defined in EIA
standard RS426A
(3) Averaged over specified bandwidth for half-space
environment. For anechoic conditions the figure is to be
decreased by 3dB
Tannoy operates a policy of continuous research and
development. The introduction of new materials or
manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to
alter without prior notice. Please verify the latest
specifications when dealing with critical applications
Part No. 6483 0217 Issue 3 A Member of the TGI plc Group of Companies
550.0
840.0
570.0
555.0
DUAL CONCENTRIC
Point Source
DUAL CONCENTRIC
Point Source