Tannoy SYSTEM 215 DMT II User manual

SYSTEM 215 DMT II MAIN MONITOR
The System 215 DMT is the ultimate realisation of the Tannoy Dual Concentric™
principles in a studio monitor.
The 15" Dual Concentric™ driver, with its wide dispersion characteristics, provides
an enlarged 'sweet spot' monitoring position, while the complementary 15" bass
driver reproduces the true impact of low frequencies.
A superb, natural sounding monitoring system for those studios where only the best
is good enough.
MONITORING
THE ULTIMATE
EXPERIENCE

TECHNICAL SPECIFICATIONS
LOUDSPEAKER
Frequency response ( 1 ) 35Hz – 25kHz
Recommended amplifier power 150 to 500 w rms into 8 Ω
Power handling Average: (2) 250 wrms Programme: 500 wrms
Nominal Impedance 4 or 8 Ω
Sensitivity (3) 104 dB SPL /2.83V @ 1 m
Distortion < 0.5%
Crossover frequency 250Hz & 1.5 kHz
CABINET
Drive units 15" full range, Point Source, Dual Concentric™
15" bass unit
Low frequency design Optimised bass-reflex loaded, in 300 litres
Cabinet construction MDF (36mm - front and back; 20.6mm - top, bottom and
sides) with energy absorbing bracing matrix and TF-2
acoustic wadding.
Cabinet finish Velti shadow grey soft-texture finish. High pressure twin
laminate in shadow grey with metallic speckled finish on
top, bottom and sides.
Cabinet dimensions (HxWxD) 786 mm x 906 mm x 555 mm
(30.9” x 35.7” x 21.8mm)
Cabinet weight 85kg (187 lbs)
Shipping dimensions (HxWxD) 1020mm x 860mm x 660mm
(40.2” x 33.9” x 26”)
Shipping weight 96kg (221.2 lbs)
Tannoy Ltd., Professional Division, Coatbridge, ML5 4TF, Scotland
Tel: [phone] Fax: [phone]
e-mail: [e-mail] Internet site: http://www.tannoy.com
TGI North America, 300 Gage Avenue, Unit One, Kitchener, Ontario, N2M 2C8, Canada
Tel: [phone] Fax: [phone]
Tannoy Nederland b.v., Anthonetta Kuijlstraat 19, 3066 GS Rotterdam
Tel: [phone] Fax: [phone]
SYSTEM 215 DMT II
The availability of new materials
and manufacturing processes
has allowed Tannoy to design
the System 215 DMT II from first
principles, producing an all new
Dual Concentric™ monitoring
system with all the classic
benefits of single point source
monitoring combined with an
exceptionally detailed but
fatigue-free sound.
APPLICATIONS
Main reference monitoring in
professional facilities, including:
❚Recording studios
❚Mobile recording
❚Broadcast
❚Post production
❚Audio visual
❚Film studios
NOTES:
(1) ±3dB, measured at 1m in anechoic chamber
(2) Long term power handling capacity as defined in EIA
standard RS426A
(3) Averaged over specified bandwidth for half-space
environment. For anechoic conditions the figure is to be
decreased by 3dB
Tannoy operates a policy of continuous research and
development. The introduction of new materials or
manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to
alter without prior notice. Please verify the latest
specifications when dealing with critical applications
Part No. 6483 0208 Issue 3
DUAL CONCENTRIC
Point Source
A Member of the TGI plc Group of Companies
906.0
786.0
555.0
DUAL CONCENTRIC
Point Source