Taoglas EDGE Connect User manual

Taoglas® EDGE IoT Starter Kit with High Precision GNSS
1. To Power On The Device
a. A single press of the Power Button will power on the device.
b.Oncethedevicehasinitialised,theUserLEDwillashwhite 3 times.
2. To Power O the Device
a. Hold the Power Button for 10 seconds
3. Checking Battery Level
a. Once powered the battery level can be checked by
giving the power button a quick press.
b.TheUserLEDwillashred a number of times in
accordance with the battery level.
0% – 20% 
20% – 40% 
40% – 60% 
60% – 80 % 
80% – 100% 
4. USB LED Behaviour
a. Once the a USB cable is plugged into the micro-USB port on the
 lesideofthedevice,thegreen USB Power LED will illuminate.
b. If the battery is not fully charged, the red charge status LED
will illuminate until charging is complete.
User
Button
Power Button
Charge Status LED
User LED
USB
Power
LED
USB Port Light
Sensor
This device must be
used outdoors with a
clear view of the sky
Device Overview
See taoglas.com/iot-support for detailed installation instructions.
For additional support contact io[email protected]om

All copyrights, trademarks and any other intellectual property rights related are owned by Taoglas Group Holdings Limited.
Taoglas® EDGE IoT Starter Kit
with High Precision GNSS
Quick Start
Built with EDGE Insights™cloud-based
enterprise-level soware platform, it
provides a scalable out-of-the-box solution
for easy control, maintenance and secure
management for a vast variety of IoT applications.
www.taoglas.com
The Taoglas® EDGE IoT Starter Kit with high precision
GNSS is an ultra low-power IoT hardware and
soware platform providing cm-level
positioning to high volume navigation
and autonomous applications in an o-
the-shelf, compact form factor.