Target Furniture DARIO DINING TABLE User manual

1
ASSEMBLY
INSTRUCTIONS
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
DARIO DINING TABLE 2315x 1105mm

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that
may damage the product.
2. Take care when lifting.Product should be assembled as near as possible to
the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instructions carefully before beginning assembly.
5. The packaging and contents can be a choking hazard, therefore keep out of
reach of small children at all time.
6. Do not over tighten the screws and bolts as this may damage the threads.
7. Failure to follow the above instructions may result in damage and or the
incorrect assembly of the furniture.
2
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
2
20 2

3
COMPONENTS / HARDWARE
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
1pc 8pcs
4pcs
ABC
DEF
1pc
G
M8*40
8pcs 8pcs 8pcs

4
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
A
B
B
B
B
B
CDEF
B
PLACE THE TABLE TOP UPSIDE DOWN ON A FLAT,SOFT SURFACE TO AVOID DAMAGE,
ALIGN HOLES IN PART B OVER THREADS IN PART A,
ATTACH PART B TO PART A USING BOLTS AS SHOWN BELOW.
COMPLETELY TIGHTEN ALL BOLTS AT THIS POINT.
STEP 1

5
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
STEP 2
FLIP THE TABLE OVER,YOUR TABLE IS READY FOR USE.

6