Targus AKB24US User manual

USER GUIDE
Visit our Website at www.targus.com Features and
specifications subject to change without notice.
© 2008 Targus Group International, Inc. and Targus, Inc.
AKB24US / 410-1478-001A
Wireless
2.4GHz
Keyboard
30

Introduction
Congratulations on your purchase of the Targus Wireless
2.4 GHz keyboard. This keyboard utilizes the latest wireless
technology to eliminate interference. Additionally, Free Smart
Link technology provides a plug-n-play experience.
Contents
•Targus Wireless Keyboard
•USB Receiver
•2 AAA Batteries (included)
•Software Driver CD
•User Guide
System Requirements
Hardware
• PC with an Intel® Pentium® processor or equivalent
• USB port
Operating System
• Windows® 2000/XP
• Windows Vista™
TARGUS WIRELESS 2.4 GHz
KEYBOARD
1

Targus Wireless 2.4 GHz keyboard
Installing the Batteries
Wireless Keyboard
1 Remove the battery cover located on the bottom of the
keyboard.
2 Insert the supplied batteries , making sure that the positive
(+) and negative (-) ends of each battery match the polarity
indicators inside the battery compartment.
Removing the battery cover
2

Targus Wireless 2.4 GHz keyboard
Establishing a Communications Link
Plug the USB receiver into an available USB port on your
computer.
NOTE: IT IS RECOMMENDED TO KEEP THE KEYBOARD AT A DISTANCE OF LESS
THAN (6 FEET / 2 METERS) TO THE RECEIVER AT THE INITIAL CONNECTION.
• Press any key on the keyboard to connect.
3

Targus Wireless 2.4 GHz keyboard
Download the software driver (Model # AKB24) from the
official Targus web site: http://www.targus.com
Save the setup file to your computer and double click on the
icon to launch the installation process.
The Installation Wizard window will prompt.
Follow the on-screen instructions to complete the installation.
NOTE: THE KEYBOARD CAN WORK WITHOUT INSTALLING THE SOFTWARE
DRIVER; HOWEVER, NOT ALL FUNCTIONS WILL BE AVAILABLE.
Installing the Software driver
The driver can be found on the CD-ROM (included)
or
Choose “Wireless Keyboard” and click “Run Setup”
4

Targus Wireless 2.4 GHz keyboard
After the software driver is successfully installed, new icons
will show in the taskbar.
There are 4 programmable “Hot Keys”. Click on the icons to
assign the new short-cut function.
Follow the on-screen instructions to setup the short-cut keys.
Keyboard Setup
Scroll LOCK - ON
CAP-LOCK - ON
Number LOCK - ON
Double click on the “Keyboard Icon” to launch the key
configuration screen
5

Targus Wireless 2.4 GHz keyboard
Using the Hot keys
Media keys
Key Function
Launch Default Media Program
Mute
Volume Up
Volume Down
Play / Pause
Stop
Key Function
Sleep
Default Internet browser
Default E-mail Program
Favorite
Calculator
My Computer
Internet and System keys
NOTE: BY DEFAULT, THE HOT KEYS ARE PRESET AS FOLLOWS:
6

Targus Wireless 2.4 GHz keyboard
Troubleshooting
• Check the receiver connection; try inserting the receiver
to another USB port on your computer.
• No connection between the device(s) and the receiver.
Re-insert the receiver. Remove and reinstall batteries.
7

Targus Wireless 2.4 GHz keyboard
Specications
Operation Frequency 2.4 GHz
Operating Distance Up to 10m
Operating Voltage Keyboard: 3V
Receiver: 5V
Operating Current Keyboard: 3mA maximum
Receiver: 30mA maximum
Suspend Mode Keyboard: Below 300 uA
Dimensions Keyboard: 470 x 147.5 x 22 mm
Receiver: 42 x 14.5 x 7 mm
Weight Keyboard: 70.4g
Receiver: 1g
8

Targus Wireless 2.4 GHz keyboard
Technical Support
For technical questions, please visit:
US Internet: www.targus.com/support.asp
Australia Internet: www.targus.com/au
Email: [e-mail]
Telephone: [phone]
New Zealand Telephone: [phone]
Product Registration
Targus recommends that you register your Targus accessory
shortly after purchasing it. Go to:
http://www.targus.com/registration.asp.
You will need to provide your full name, email address, country of
residence and product information.
Warranty
Targus warrants this product to be free from defects in materials
and workmanship for one year. If your Targus accessory is found
to be defective within that time, we will promptly repair or replace
it. This warranty does not cover accidental damage, wear and tear,
or consequential or incidental loss. Under no conditions is Targus
liable for loss of, or damage to devices; nor loss of, or damage
to, programs, records, or data; nor any consequential or incidental
damages, even if Targus has been informed of their possibility. This
warranty does not affect your statutory rights.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.
9