Tassimo T45 User manual

Tassimo
How to use your Tassimo T45
Written By: Matt
INTRODUCTION
Follow the steps below to brew a great cup of coffee.
How to use your Tassimo T45
© 2013 tassimo.dozuki.com Page 1 of 4

Step 1 — How to use your Tassimo T45
Turn your Tassimo machine on and make sure it has sufficient water in the water tank.
When ready, the Stand-by icon will light up.
Place a suitable cup on the stand, according to the type of drink you will be brewing.
If necessary remove the cup stand.
Step 2 — Insert the T DISC
Select your T DISC.
Open the brewing unit by lifting the lid.
Insert the T DISC with the barcode side down. Be sure the tab of the T DISC is secured in
the slot to the right.
How to use your Tassimo T45
© 2013 tassimo.dozuki.com Page 2 of 4

Step 3
Close the brewing unit by firmly pushing the lid down until it clicks into place.
Step 4
The stand-by light will flash while reading the bar code. When the Automatic icon lights up
(green), your Tassimo machine is ready to brew.
Press the start/stop button.
For a stronger taste and a smaller drink, press the start/stop button at any
stage during the brewing process to stop the process early.
For a milder taste and a larger drink, wait until the Automatic brewing process has
finished. The Manual icon will light up; press and hold the start/stop button to manually
extend the brewing process.
Sit back and enjoy your hot and tasty beverage.
How to use your Tassimo T45
© 2013 tassimo.dozuki.com Page 3 of 4

This document was last generated on 2013-11-28 10:14:17 AM.
Step 5
Wait until the orange stand-
by light is on before
removing the used T DISC. The
green light indicates your
TASSIMO machine is still in use.
If you do not wish to
prepare more drinks, we
recommend that you turn off your
TASSIMO machine using the on/off
switch.
How to use your Tassimo T45
© 2013 tassimo.dozuki.com Page 4 of 4