TATSOUL 370-S User manual

P9-1
When a client is getting on the chair,
ALWAYS have the chair locked and the bed
set in a parallel position to the base as shown.
Correct Position

P1(60027)Connector Bolt
M10x25 1 pcs
P2(60028)Connector Washer
φ10X20X1.5 1 pcs
P3(60029) Split Lock Elastic Gasket
φ10 1 pcs
S1 (60030) Spring Hook 1 pcs
S2 (60031) Connector Washer
φ6x13x1 1 pcs
S3 (60032) Hook Screw
M6x16 1 pcs
W (60040) Adjustable Foot Pegs
φ48x10x30 4 pcs
Y (60042) Leg Bars 2 pcs X2 (60037) Back Teeth 1 pcs
X1(60041) Back Teeth Bolts
M8x45 2 pcs
T1 (60033) Base Bolt
M8x20 4 pcs
T2 (60034) Base Washer
φ8X17X1.5 4 pcs
Z4 (60046) Lock Pin 1 pcs
U1 (60035) Top Frame Bolt
M8x30 6 pcs
U2 (60036) Top Frame Washer
φ8X17X1.5 6 pcs
Z1 (60043) M5 Allen Wrench 1 pcs
Z2 (60044) M6 Allen Wrench 1 pcs
Z3 (60045) M8 Allen Wrench 1 pcs
CONTENTS
O1 (60047) Connector Bolts
M10x40 2 pcs
O2 (60048) Since The Lock Nuts
M10 2 pcs
P9-2

(W(60040))
P9-3
X1 (60041)
S1 (60030)/S2 (60031)/S3(60032)
Z2
Z2
Step1. Screw foot pegs into base.
Step2. Fasten base to lift with Base Bolts & Washers.
4
U1(60035)
U2(60036)
Z2
Step4. Fasten Seat Frame
Bracket to bottom of seat
with frame bolts & washers.
Step3. Fasten Spring Hook Bracket
to bottom of seat with spring
hook bracket bolt & washer.
Step5. Fasten Back Teeth to seat
back with back teeth bolts.

(Y(60042))
67
P9-4
8 (O1(60047)\O2(60048))
Z1
Step6. Insert Leg Rest Bars into
handle of seat frame and
fasten stopper bolt and
washer.
Step7&8. Tighten Hinge Bolt on leg rest bars.
Step9. Place Seat Frame Bracket on to lift piston,
aligning seat frame notch with piston peg.

13
13
P9-5
P1 (60027)/P2 (60028)/P3(60029)
X2 (60037)
M8
Z3
Step10. Insert Back Adjustment
Bar into Back Teeth, then fasten
back teeth crossbar over top with
cross bar mounting screws.
Step11. Attach Spring to Seat Back
Adjustment Bar and Spring Hook
Bracket.
Step12. Insert Adjustable Foot Rest
into seat frame bracket and tighten
lock knob. Insert locking pin into foot
rest height adjustment holes.
Step13. Fasten Seat Frame Bracket
to Lift Piston, using connector bolt
with washer and gasket.

P9-6

P9-7

1.Use soft cleaning implements. Only clean your vinyl seats with soft sponges, dish
cloths, and soft-bristled brushes. This will ensure your vinyl seats last for many years.
Using steel wool, sharp cleaning tools, or similarly abrasive cleaning implements could
cause your vinyl seating to tear.
2. Wash your vinyl with soapy water. Mix a small amount of mild dish soap with warm
water until the mixture is sudsy. Dip a soft-bristled brush or soft cloth in the water. Scrub
the vinyl seats until clean.
3. Do not use abrasive cleaning compounds. Undiluted bleach, for instance, is too
caustic to use on vinyl. Over time, cleaning your vinyl seats with bleach will cause them
[6 ] [ 7]
to break down. Likewise, avoid cleaning compounds containing:
concentrated detergents
silicone oils
waxes
petroleum distillates
dry cleaning fluids
solvents
acid-based cleaners
VINYL AFTERCARE
P9-8

P9-9