TATSOUL TS-SH-B User manual

INSTRUCTION MANUAL
TS-SH-B/TS-SCB-B
P8-1

D: Heightening cushion 2
G: Armrest support frame 1 pcs
A: Legrest cushion 2 pcs B: Armrest cushion 1 pcs
F: Legrest support frame 1 pcs
H: L shape regulating stem 1 pcs
I： Bolts M8x25 6 pcs
Washers φ8 6 pcs
Split Lock Elastic Gaskets
φ8 6 pcs
J： Bolts M6x35 2 pcs
Washers φ6 2 pcs
Split Lock Elastic Gaskets
φ6 2 pcs
L： Lock Pin 3 pcs
M： The armrest's bolt 2 pcs
C: Chest cushion 1 pcs
E: Headrest 1 pcs
K： M5 Hexagon key 1 pcs
P8-2

ASSEMBLY INSTRUCTIONS
Step 1
Step 2
Step 1：Using the M5 Hex Key (K), fasten the legrest cushion (A) to the frame (F)
with hardware (I).
K
I
K
J
A
F
B
G
Step2：Using the M5 Hex Key (K), fasten the armrest support frame (G) to
armrest cushion (B) using hardware (J).
P8-3

ASSEMBLY INSTRUCTIONS
4
4
3
5
Step 3 Step 5
Please note:Groove1 of The armrest's bolt is suitable for CC300,
Groove2 of The armrest's bolt is suitable for CC370/570/680/OLE680CC.
Lock
H
L
Step 3 As shown, insert the L shape regulating stem (H) to the tube of the ：
chair following the direction of arrow, then tighten with a locking knob.
Step 4
M
Groove1
Groove2
P8-4
Knob
F
F
G
Step As shown, insert the armrest bolts (M) to fix the armrest cushion (B) 4：
following the direction of arrows.
Step As shown, insert the frame (F) to the L shape regulating stem (H) and use the 5：
Lock Pin (L) to lock with the armrest support frame (G).
B

1) As shown, pull up the handle to adjust the pillow's angle and press down ：
the handle to lock movement.
OPERATING INSTRUCTIONS
pull up the handle press down the handle
2)：As shown, pull up both side handles to unlock, then adjust the pillow up and down
to a suitable position. Press down the side handles to lock.
pull up the handle press down the handle
P8-5

OPERATING INSTRUCTIONS
3.1)：Hang the chest cushion (C) from the back of the pillow's bolts using hook and loop
fasteners for additional user comfort.
3.2)：Attach the Heightening cushion (D) to legrest cushion (A) for additional comfort and
flexibility of foot adjustments.
C: Chest cushion
D: Heightening cushion
L: Lock
Pin
L: Lock
Pin
4.1) As shown, pull out the lock pin to adjust the armrest to desired angle until ： (L)
comfortable.
4.2)：As shown, first loosen the locking knob to adjust the legrest forward or backward
with the L shape regulating stem. (Note: do not pull out the L shape regulating stem
past the locking knob.) Next, remove the lock pin to adjust the footrest height.
Replace the lock pin when desired height is met.
Knob
3.1)
3.2)
4.1)
4.2)
A: Legrest cushion
P8-6

VINYL AFTERCARE
1.Cleaning lnstructions.To ensure the safety and life of your vinyl seats,
please use only specified cleaners and cleaning materials listed below.
2. Accepted Cleaners. Mix a small amount of mild dish soap with warm(not hot) water .
Dip a very soft-bristled brush or soft cloth into the soapy water and gently scrub with seats
in a circular motion. Wipe the water off with another soft, dry cloth.
3. Unacceptable Cleaners. Do not use abrasive cleaning compounds such as bleach or
ammonia. They will harm the vinyl and, over time, cause the material to fade or tear.
Also, do not use:
Concentrated detergents
Silicone oils
Waxes
Petroleum distillates
Dry cleaning fluids
Solvents
Steel wool
Sharp cleaning tools
Abrasive cleaning materials or impements
Acid-based cleaners
P8-7

CONTACT INFORMATION:
General Information:
Email: [e-mail]
Fax: [phone]
Sales:
Email: [e-mail]
Telephone:1-888-TAT-SOUL
(1-888-828-7685) Option 1
Email: [e-mail]
Telephone:1-888-TAT-SOUL
(1-888-828-7685) Option 2
Technical Support:
If you have any questions about our products,
feel free to contact us via email or by phone. We
are available via telephone during PST business
hours. We try to respond to emails within a few
hours of their receipt, even during evenings and
weekends.
P8-8