TAVO BASE User manual
Base
TAVO™3
Go
Anywhere,
Together.
THANK YOU
You’ve just purchased a Tavo product,
and you can be sure that your pet is getting
the best there is. Our products are expertly
engineered for safety, with luxury fabrics
and sophisticated style. Whatever made
you fall in love with Tavo, rest assured your
adventures with your pet will be easier from
now on, freeing you to enjoy more happy
family moments together.
TAVO 54 BASE
Important! Keep
these instructions
for future reference:
Read carefully.
Contents
PRODUCT INFORMATION
LIMITED WARRANTY
CONTACT
PET USAGE REQUIREMENTS
WARNINGS
PARTS LIST
PRODUCT USE
CLEANING & MAINTENANCE
6
6
7
7
8
10
12
16
TAVO 76 BASE
Product Information
LIMITED WARRANTY
For limited warranty information, please visit:
www.tavopets.com/warranty
Model Number:
Manufactured in (date):
Pet Usage Requirements
CONTACT
For replacement parts, service, or additional warranty
questions, please contact our customer service
department.
In the USA:
Tavo Pet Essentials
70 Thousand Oaks Blvd
Morgantown, PA 19543
info.usa@tavopets.com
www.tavopets.com
1-888-912-0375
In the EU:
NUNA International B.V.
Van der Valk Boumanweg 178 C,
2352 JD Leiderdorp, The Netherlands
In the United Kingdom:
Allison Baby UK Ltd,
Venture Point, Towers Business Park
Rugeley, Staffordshire, WS15 1UZ
This base is suitable for use with pets weighing up to
30 lb/13.6 kg, depending on the weight limit of the Tavo
Pets carrier you are using.
Maeve™S Flex carrier: up to 20 lb/9 kg
Maeve™M Flex carrier: up to 25 lb/12 kg
Maeve™M Rigid carrier: up to 30 lb/13.6 kg
TAVO 98 BASE
WARNING
Failure to follow these warnings and instructions could result
in serious injury or death.
ONLY use this base with Tavo Pets carriers.
NEVER use this base with an infant car seat.
DO NOT allow more than one pet in the carrier when using
the carrier in a vehicle.
This base can ONLY be installed in the second or third row of
seats in a vehicle. The base cannot be properly secured in the
front seat and will be unsafe.
This base can ONLY be installed in vehicle seat positions
with LATCH. Refer to your vehicle owner’s manual for LATCH
locations. Common locations of LATCH in a vehicle are shown
below.
The stability leg MUST be used when the base is installed.
DO NOT leave the carrier and base in the vehicle when
uninstalled, even when unoccupied. In a crash, they could
become a projectile and cause injury.
DO NOT continue using the base or carrier if it has been
involved in a moderate or severe vehicle crash. An accident
can cause damage to it that you cannot see.
When your vehicle is parked in sunlight, cover the base/
carrier after removing your pet from the carrier. Parts of the
base/carrier can become very hot if left in the sun, and can
burn you or your pet. Check for hot parts before putting your
pet in the carrier.
DO NOT make any changes or modiications to the base that
are not speciied in this manual.
Use original Tavo Pets parts and accessories only.
Vehicle
lower anchor
points
TAVO 1110 BASE
Parts List
Make sure all parts are available before assembly. If any part
is missing, please contact Tavo Pets (page 7). No tools are
required for assembly.
1 Rigid Latch
2 Carrier Attachment Indicator
3 Stability Leg Adjustment Button
4 Stability Leg
5 Stability Leg Indicator
6 Carrier Release Button
7 Base Adjustment Button
8 Secondary Rigid Latch Release Button
(with Base Attachment Indicator)
9 Primary Rigid Latch Release Button
10 Latch Guides
8
9
10
7
1
6
5
4
3
2
TAVO 1312 BASE
1
1
2
3
TO INSTALL BASE
1 Attach latch guides to vehicle lower anchor bars.
2 Unfold stability leg from bottom of base.
3 Guide rigid latch through latch guides onto vehicle lower
anchor bars.
4 If attached properly, base attachment indicator on rigid
latch will be green.
5 Squeeze base adjustment button to slide base as close
as possible to vehicle seat back.
6 Extend stability leg to loor by pressing stability leg
adjustment button (1) and pulling down (2).
Stability leg indicator will show green when stability leg
is in contact with loor (3).
Stability leg MUST be used when base is installed.
Product Use
41
2
3 6
5
TAVO 1514 BASE
TO ATTACH CARRIER TO BASE
Carrier MUST be attached to base when used in vehicle.
Magnetic buckles MUST be secured and side impact
protection (SIP) MUST be attached when carrier is used
with pet in vehicle. Consult carrier manual for detailed
instructions.
1 Lower carrier onto base. A “click” sound means carrier is
connected. Pull up on carrier handle to check.
If carrier is connected properly, carrier attachment
indicator on BOTH sides of base will be green.
TO REMOVE CARRIER FROM BASE
2 Squeeze carrier release button (1) and lift carrier off of
base (2).
TO UNINSTALL BASE
3 Squeeze primary and secondary rigid latch release
buttons at the same time (1), and pull base away from
vehicle lower anchor bars (2).
4 Shorten stability leg and fold into bottom of base.
31
24
click
1
1
2
2
TAVO 1716 BASE
Use only mild detergent, water, and a soft cloth to clean the
base.
Air dry.
Check regularly if everything functions properly. If any parts
are broken or missing, stop using this product, and contact
Tavo Pets for assistance (page 7).
Cleaning & Maintenance
IM-001022C
Table of contents
