Prevue Hendryx 531 User manual

S3.B
S3.A
Align holes to
ove lapping
531—11/22 — A4.1 Made in China for Prevue Pet Produ ts, In ., 224 N Maplewood Ave, Chi ago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet. om • ustomerservi e @ prevuepet. om
KEY:
R=Roof
S=Si e pieces
BK = Back pieces
B=Base
F=Front pieces
Sma Anima Home
PARTS LIST
ASSEMBLY
Instructions online at www.prevuepet.com
]F1
]F2
]F3
]S1.B
]S1.A
]S2.A
]S2.B
S3.B
S3.A
]S1.B
]S1.A
]S2.A
]S2.B
]B
]Bk1
]Bk2
]Bk3]R
Hex Screw
8 pcs
Casters
4 pcs
Hex Key
Wrench
CUSTOMER SUPPORT
Please contact Prevue Pet Pro ucts:
PHONE [phone]
ONLINE www.prevuepet.com
EMAIL customerservice @prevuepet.com
Interchangeable:
]S1.A= ]S1.B
]S2.A= ]S2.B
]S3.A= ]S3.B
⁕
Heavy ve tical wi es
face DOWN
T ay channels
face UP
Loop
faces UP
See notes on Pa ts o ientation.
With the S1frame laying flat, insert
the S2mesh into the holes at the top
of the frame.
Insert the S3frame bar between the
frame legs.
Sli e up carefully, inserting the mesh
into the top holes, an aligning the
holes along the frame legs.
531
MODEL #
1PIECES PREASSEMBLE THE SIDE PANELS
interchangeable
interchangeable
interchangeable

Bk2
Bk3
Bk1
For more wonderful ages, toys, and a essories for ats, birds, hi kens, rabbits, ferrets, dogs and small animals, visit www.prevuepet. om531—11/ 22 — A4.2
]1
]2
]3
1Insert the exten e
wires of the front panel
into the holes of the
frame rail.
2Insert the front upper
frame rail onto the
exten e wires of the
front panel.
3Attach the frame rail
to the si e panels with
hex screws.
× 4
F2
F3
F1
× 4
View f om
f ame ail
end
Channel t ack on f ame ail
ove laps the channel t ack
on the side panel
T ay channels
face the Inte io
Holes on
lowe f ame
ail face UP
See notes on the o ientation of Pa ts.
Attach the front lower frame rail to the
side panels with hex screws.
Leave screws loose at this stage.
2PIECES
Thick ve tical
wi es face the
cage Exte io
]4
]5
]6
]7
Thick ve tical
wi es face the
cage Exte io
Same assembly as the front,
with these exceptions:
4Attach the ba k lower
frame rail with hex screws.
On one si e, attach the
screw just enough to hol
the rail — the screw will be
remove in the next step.
5Insert the ba k panel.
6A the ba k upper frame
rail.
7Attach the top frame rail
with one screw.

531—11/22 — A4.3 Made in China for Prevue Pet Produ ts, In ., 224 N Maplewood Ave, Chi ago IL 60612 USA • 1 [312] 243-3624 • www.prevuepet. om • ustomerservi e @ prevuepet. om
Finish attaching the back panel frame
rails with the remaining hex screws.
Tighten up ALL s rews over the entire
age for a stable and se ure assembly.
3PIECES
]1
]2
]3
]4
1Remove the lower frame
rail screw that was left
loose.
2Open the seam up wi e
enough to:
3...insert the exten e
wires on the roof panel
into the small holes on
the si e frames, just
above the frame rail.
Push the back/si e
panel seam close
to secure the
exten e wires
in place.
4Close the roof
an catch the
front e ge wire
un er the
alternating
hooke tabs
along the top
frame rail.
R

For more wonderful ages, toys, and a essories for ats, birds, hi kens, rabbits, ferrets, dogs and small animals, visit www.prevuepet. om531—11/ 22 — A4.4
Carefully tip the cage on its si e.
Han -tighten the casters into the
frame legs an , to get them fully
inserte , finish tightening with
the enclose wrench.
Turn the cage upright an
sli e the base into place.
4PIECES
Assembly complete . {
CASTERS
WRENCH
B